PULSEEIGHT P8-AD340 User manual

P8-AD340
QUICK SETUP GUIDE
16 Way Selector Dial to select the correct
setting (increments approx. 20~ milliseconds)
Audio Out (R) Right output, connect to the
output device (i.e amp)
Audio Out (L) Left output, connect to the
output device (i.e amp)
Power Use the supplied mains power cable and
connect to the chassis. Do not use any other power
cables with this product.
Audio In (L) Left input, connect to the input
device (i.e audio matrix)
Audio In (R) Right input, connect to the input
device (i.e audio matrix)
A
D
B
E
C
F
A
D
B
E
C
F

INITIAL SETUP
1CONNECT OUTPUT DEVICE
Using the ‘Audio Output’ ports, connect to the input
device (i.e amp)
2CONNECT INPUT DEVICE
Using the ‘Audio Input’ ports, connect to the output
device (i.e audio matrix)
3CONNECT POWER
Use the supplied mains power
cable and connect to the
chassis. Do not use any other
power cables with this product.
4SELECT SETTING
Adjust position of rotary switch
using at head screwdriver
to obtain correct delay. See
adjacent chart for details.
Avoid turning the dial too
quickly or harshly.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means (electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise) without express
written permission and consent from Pulse-Eight Limited.
© Copyright 2017 Pulse-Eight Limited. All Rights Reserved.
Version 1.0 - June 2017
Pulse-Eight Limited
8-12 Alder Hills . Poole . Dorset . BH12 4AL . UK
[e-mail] | [phone]
www.pulse-eight.com
Setting Delay in ms
0 21
1 43
2 64
385
4107
5 128
6149
7171
8192
9213
A235
B 256
C277
D 299
E320
F 341