Pure Enrichment pure relief XL User manual

USER MANUALUSER MANUAL
MODEL: PEHPBACK-GMODEL: PEHPBACK-G

1
IMPORTANT SAFETY
INSTRUCTIONS
DO NOT DESTROY
DANGER: TO REDUCE THE RISK OF BURNS,
ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY,
THIS PRODUCT MUST BE USED IN ACCORDANCE
WITH THE FOLLOWING INSTRUCTIONS:
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.
4. THIS PRODUCT IS NOT TO BE USED ON OR BY AN
INVALID, A SLEEPING OR UNCONSCIOUS PERSON,
A PERSON WITH DIABETES, OR A PERSON WITH
POOR BLOOD CIRCULATION UNLESS CAREFULLY
ATTENDED.
5. DO NOT USE ON AREAS OF THE SKIN THAT ARE
INSENSITIVE TO TOUCH OR HEAT.
6. BURNS CAN OCCUR REGARDLESS OF CONTROL
SETTING. CHECK SKIN UNDER PRODUCT
FREQUENTLY.
7. DO NOT USE IN AN OXYGEN-FILLED ATMOSPHERE.
8. DO NOT USE PINS OR OTHER METALLIC OBJECTS
TO FASTEN THIS PRODUCT INTO PLACE.
9. DO NOT SIT ON OR AGAINST THE PRODUCT OR
CRUSH IT. AVOID SHARP FOLDS IN THE FABRIC.
10. DO NOT USE THE CORD AS A HANDLE.
11. CHILDREN SHOULD NOT USE THIS UNIT WITHOUT
ADULT SUPERVISION.
3
12. PLACE UNIT ON TOP OF AND NOT UNDER THE PART
OF THE BODY THAT REQUIRES HEAT THERAPY.
13. ONLY USE THIS PRODUCT ON A 110-120V AC CIRCUIT.
14. UNPLUG WHEN NOT IN USE.
15. DO NOT USE WITH GENERATORS, POWER
CONVERTERS, OR INVERTERS.
16. DO NOT TAMPER WITH THIS PRODUCT IN ANY WAY.
THERE ARE NO USER-SERVICEABLE PARTS. IF FOR
ANY REASON THIS PRODUCT DOES NOT FUNCTION
PROPERLY, CONTACT PURE ENRICHMENT AT
[e-mail]
17. DO NOT USE THIS PRODUCT WITH LINIMENT, SALVE
OR OINTMENT PREPARATIONS AS SKIN BURNS
CAN RESULT.
18. NEVER PULL THIS PAD BY THE SUPPLY CORD.
19. DO NOT BEND OR PINCH THE CORD.
20. DO NOT USE PRODUCT IF THE CORD IS DAMAGED.
21. NEVER LEAVE THE PRODUCT UNATTENDED,
ESPECIALLY IF CHILDREN ARE PRESENT.
22. LOOP CORD LOOSELY WHEN STORING. TIGHT
WRAPPING CAN DAMAGE CORD & INTERNAL PARTS.
23. THIS PRODUCT HAS A POLARIZED PLUG (ONE
BLADE IS WIDER THAN THE OTHER). TO REDUCE
THE RISK OF ELECTRIC SHOCK, THIS PLUG IS
INTENDED TO FIT IN A POLARIZED OUTLET ONLY
ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE
OUTLET, REVERSE THE PLUG. IF IT STILL DOES
NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO
INSTALL THE PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THE PLUG OR
DISABLE THIS SAFETY FEATURE IN ANY WAY.
24. SAVE THESE INSTRUCTIONS.
2

2 3
USING PURERELIEF XL (Cont'd)
NOTE: If the unit does not turn on when you press the power
button, make sure the Control Connector is securely plugged
into the Pad Connector.
To turn PureRelief XL off, scroll through all the heat settings until
the heat indicator light turns off.
CUSTOMIZING THE FIT
PureRelief XL is made with 2 built-in belt loops and includes
a removable elastic belt. For a snug t, insert the belt into the
loops, position the heating pad as you normally would around
your neck and back, then wrap the belt around your waist and
secure with the velcro closure.
AUTO-OFF FEATURE
To conserve energy and prevent skin burns caused by excessive
use, PureRelief includes an auto-off feature. The unit will turn off
automatically after two hours of continuous use. The red auto-off
light will blink when this feature is activated.
NOTE: After a power outage, PureRelief XL automatically
resets the timer on the auto-off feature.
USING MOIST HEAT THERAPY
To use moist heat therapy with PureRelief XL,
ll a spray bottle with water and lightly mist the
entire surface of the pad. Take care to protect
your clothing and furniture when using a damp
heating pad.
DANGER: DO NOT submerge PureRelief XL in
water or place it under running water while it is
plugged into an electrical outlet. Doing so can
damage PureRelief and cause serious personal injury.
INTRODUCTION
Thank you for purchasing the PureRelief XL Back & Neck
Heating Pad from Pure Enrichment. We designed this full-
coverage heating pad to provide soothing heat therapy to the
entire neck, shoulder, and back area.
USING PURERELIEF XL
Attach the Pad Connector to the Control Connector. Push both
parts together securely to ensure a tight t.
NOTE: The Control Connector must be connected to the Pad
Connector before plugging the unit into an electrical outlet.
After connecting the Pad Connector to the Control Connector,
plug the unit into a 120V AC electrical outlet.
To turn PureRelief XL on, press the power button. Select the
desired heat setting by continuing to press the power button until
the heat indicator light is the color of your desired heat setting:
Green=Warm Orange=Medium
Yellow=Low Red=High
To turn PureRelief XL off, press the power button one more time.
NOTE: The “high” indicator light will blink red when an error
occurs. If this happens, unplug PureRelief XL. Check the
physical condition of the cord, the wall outlet, and the connection
between the Control Connector and the Pad Connector. If
blinking persists after you conrm proper connection, contact
Pure Enrichment at [email protected]
4 5
Control
Connector
Pad
Connector
H2OH2O

4 5
USING PURERELIEF XL (Cont'd)
NOTE: The Pad Connector and the Control Connector must be
completely dry before establishing an electrical connection.
WASHING INSTRUCTIONS
To prolong the life of your heating pad, proper care and cleaning
is essential. Follow these washing instructions to preserve the
softness of the fabric and protect the electrical components:
1. Fill washer with warm water.
2. Add a minimum amount of all-purpose detergent,
agitate to dissolve, measure heating pad before
washing.
3. Add heating pad and soak ve minutes.
4. Agitate two minutes. Spin. Fill for cool rinse, agitate
one minute then spin.
5. Dry in an automatic dryer on high heat for ve minutes
only or line dry.
6. Remove damp heating pad from dryer.
7. Block to original size and drape to nish drying.
8. Do not iron your heating pad.
NOTE: Make sure the Pad Connector is completely dry
before plugging the heating pad into an electrical outlet.
PRODUCT SPECIFICATIONS
Pad Size: 29” x24”
Power Supply: AC: 120V, 60Hz, 85W
Pad Material: Double-sided Micromink
Auto Shut-Off Timer: 120 minutes
4 Heat Settings: Warm–temperature range (~110oF)
Low–temperature range (~120oF)
Medium–temperature range (~130oF)
High–temperature range (~140oF)
6 7
WARRANTY
PureRelief XL comes with an industry-leading 5 Year Warranty
that begins on the date of purchase.
The warranty applies to the heating pad and necessary parts
and labor relating thereto. The warranty does not apply to
damage resulting from failure to follow the operating instructions,
accidents, abuse, alterations, or disassembly by unauthorized
individuals.
PRODUCT REGISTRATION
To ensure your full warranty and to receive product updates
and streamlined customer support, remember to register your
product at:
pureenrichment.com/productregistration
ARE YOU 100% SATISFIED?
If you have product questions or concerns, don’t hesitate to
contact us directly at:
Email: [email protected]
Phone: [phone]
(Available Monday-Friday, 8am-5pm PST)
Pure Enrichment has an award-winning warranty, exchange, and
customer service program that guarantees hassle-free solutions
to any issue you might have within 24 hours!

FCC NOTICE
Model: PureRelief XL Back & Neck Heating Pad (PEHPBACK-G)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Pure Enrichment
2803 S. Yale St.
Santa Ana, CA 92704
pureenrichment.com
The product is protected against unauthorized use. DO NOT
modify it without the authorization of the manufacturer, or the user’s
authority to operate could be voided.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Santa Ana, CA 92704
pureenrichment.com
REV: 09.10.21