Pure Fitness DELUXE INVERSION THERAPY TABLE User manual

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 1
• Do not allow more than one person on
this product at any time.
• Adult supervision is required.
• Please read all the instructions before
using this product.
• Consult a physician before beginning any
exercise program or strenuous activity.
• ADULT ASSEMBLY REQUIRED.
Please visit www.pureglobalbrands.com to
register your product to ensure warranty
coverage.
WARNING
THE CONTENTS OF THIS PACKAGE ARE NOT SUITABLE FOR CHILDREN
UNDER 3 YEARS OF AGE. CONTAINS SMALL PARTS WHICH MAY CAUSE CHOKING.
250 LBS MAXIMUM WEIGHT RATING
PURE FITNESS - USER MANUAL
DELUXE INVERSION THERAPY TABLE
MODEL# 8650IT
SIMPLY GOOD PRODUCTS FOR REAL LIFE
!

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 2
Thank you for purchasing our Deluxe Inversion Therapy Table
At Pure Global Brands, we want all of our customers to be completely satisfied with their purchase.
Please take time to review the contents of the product you have just received to make sure that all
of the parts are included. If you find that any parts are missing or damaged, we will happily provide
replacement parts at no charge within 30 days of purchase. Please keep in mind that for select
damaged part replacement requests, we will require a photo for submission to our quality
control office.
To order these parts, or if you have any other questions or concerns about this Pure Global product,
please e-mail the Pure Global Brands, Inc. customer service department at:
[e-mail] or contact us at 1-866-498-5269 (8:30am-5pm EST, Monday-Friday).
You can also visit our website at: www.pureglobalbrands.com
If you request replacement parts, please be sure to include the following information in your correspondence:
YOUR NAME
YOUR MAILING ADDRESS
YOUR EMAIL ADDRESS
RETAILER WHERE YOU PURCHASED PRODUCT
DATE OF PURCHASE
ORDER # (IF AVAILABLE)
PRODUCT MODEL #: 8650IT
SERIAL #
PRODUCT NAME: Deluxe Inversion Therapy Table
PART # (located in manual)
QUANTITY NEEDED
PICTURE OF DAMAGED PART(s) – SUBMIT VIA Email or Mail
Thank you for purchasing a Pure Global Brands product.
Sincerely,
Customer Service
Pure Global Brands, Inc.
Phone: [phone]
Email: [e-mail]
17250 Dallas Parkway
Dallas, TX 75248
CUSTOMER SERVICE INFORMATION

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 3
Pure Global Brands, Inc. warrants this product to be free from defects in workmanship and materials
under normal use and conditions for the duration of the period outlined below FROM THE DATE OF
ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only for the
original purchaser of the Product.
The various components of the product are warranted against defects and workmanship for the
following time period(s):
• Steel Frame: 1 Year
• All Other Parts: 90 Days
All warranty coverage extends only to the original retail purchaser from the date of purchase. Pure Fitness’
obligation under this Warranty is limited to replacing or repairing, at Pure Fitness’ option, the product at one
of its authorized service centers. All products for which a warranty claim is made must be received by Pure
Fitness at one of its authorized service centers and accompanied by sufficient proof of purchase (photocopy of
the original store receipt, indicating the date of purchase). All freight and handling fees are the responsibility of
the consumer to pay, both to and from Pure Fitness. All warranty claims must be pre-authorized by Pure Fitness.
Pre-authorization can be obtained by calling 866-498-5269. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage,
or repairs not provided by a Pure Fitness authorized service center or for products used for commercial or rental
purposes. This warranty does not cover ordinary wear and tear, weathering, failure to follow directions, improper
installation, improper maintenance or acts of Nature (such as damage caused by wind, lightning, snow, water or
ice). Weather damage, damage caused by unauthorized repair work or damage caused by improper use of the
products are not covered by the product warranty. No other warranty beyond that specifically set forth above is
authorized by Pure Fitness.
PURE FITNESS IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY
ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL,
INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE
WARRANTY EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND PURE FUN SPECIFICALLY DISCLAIMS
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND
DURATION TO THE TERMS SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS. ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights.
You may also have other rights, which vary from state to state.
LIMITED WARRANTY

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 4
IMPORTANT MESSAGE
WARNING - PLEASE READ
WARNING:
CHOKING HAZARD - Small Parts
NOT for children under 3 years of age.
ADULT ASSEMBLY REQUIRED
WARNING
While every attempt is made to ensure the highest degree of
protection in all equipment, we cannot guarantee freedom
from injury. The user assumes all risks of injury due to use. All
merchandise is sold on this condition, which no representative of
the company can waive or change.

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 5
WARNINGS
• Ensure that this product has been assembled correctly per
the instructions in the manual.
• This manual is designed to help you assemble, adjust,
maintain and use the product. It contains important
information regarding your safety and your use of this
equipment.
• ALWAYS consult your physician or other health care
professional before starting use of an inversion table.
• Do not use this equipment if you have any of the following
pre-existing medical conditions: Extreme Obesity, Glaucoma,
Retinal Detachment, Conjunctivitis, are Pregnant or may
be Pregnant, Spinal injuries, Cerebral Sclerosis, Swollen
Joints, Ear Infections, High Blood Pressure, Hypertension,
Recent Strokes or Transient Ischemic attacks, Heart or
Circulatory Disorders, Hiatus or Ventral Hernias, Bone
Weaknesses; including but not limited to: Osteoporosis,
Unhealed Fractures, Modularity Pins, or Surgically implanted
orthopedic supports, or you are using anti-coagulants or
aspirin regimens.
• ALWAYS return to the upright position slowly. Coming up too
fast may result in dizziness or nausea.
• ALWAYS ensure that this product is on sturdy, level ground.
It is recommended that you use a safety surface underneath
this inversion table.
• ALWAYS ensure that the Safety Lock is securely in position
when not using the inversion table.
• ALWAYS ensure that all the Lock Pins are securely in place
before using this table.
• ALWAYS make sure that the Safety Strap is in securely
attached, even when the table is not in use.
• NEVER allow children to use or to play on or near
this inversion table. This item should only be used by
knowledgeable adults.
• NEVER place this table where children and those unfamiliar
with the dangers associated with using an inversion table will
have unsupervised and unauthorized access to it.
• The height measurements on the center bar are guidelines
only. You may need to adjust this bar in either direction
depending on your body mass and weight. Until you are
certain you have achieved the proper setting on this bar, you
must use an adult spotter.
• Ensure that you know how the inversion table will respond
to your arm movements and weight shifts before attempting
inversions greater than 30 degrees. It is required that until
you are certain how this specific inversion table operates,
you use an adult spotter to assist you with exercises, even if
you have used an inversion table previously.
• Do NOT exceed the recommended MAXIMUM WEIGHT limit
of 250lbs. (113 KGS)
• This machine is intended for home use only and not
designed for commercial use.
• Before using this product, inspect your machine; make
sure that all nuts and bolts are tight and in working order,
replace any worn, defective or missing parts.
• Do NOT wear loose fitting clothing, belt buckles, or jewelry,
including but not limited to rings, chains, and pins before
commencing exercise; this can be extremely dangerous.
• It is recommended that you wear the proper fitness attire
when using this machine. All items must be removed from
any pockets before inverting.
• Consult your physician before beginning any exercise
program to evaluate your present fitness level and
determine the exercise program that is most appropriate
for your particular age and condition.
• If you experience any pain or tightness in your chest,
irregular heartbeats, shortness of breath, faintness or
other unusual discomfort while exercising, stop and obtain
medical assistance and/or consult your physician before
continuing.
• STOP using the inversion table immediately if you
experience any unusual physical discomfort, pressure, pain,
weakness or dizziness when using the equipment.
Please read these warnings and the information in this manual in its entirety.
Failure to comply with the following instructions may increase the risk of serious injury and/or death:

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 6
Please visit www.pureglobalbrands.com for any important product information updates and/or additional safety
warnings before assembling or using this product.
Use search word: 8650IT
When you are ready to start, make sure that you have the correct tools at hand and adequate space for assembly.
Please refer to the following pages for part descriptions and numbers. The assembly instruction uses these
descriptions and numbers as reference. Make sure you have all parts listed.
If you are missing any parts, contact customer service at:
[e-mail] or by calling
1-866-498-5269 (8:30am-5pm EST, Monday-Friday).
NOTE:
For your convenience, many of the parts in the Hardware List have been pre-assembled at the factory.
The Hardware which is required for home assembly is listed as it appears in the included Hardware Pack.
PRIOR TO ASSEMBLING

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 7
HARDWARE LIST
Part # Description Qty
1Front Base Frame 1
2Rear Base Frame 1
3Backrest support frame 1
4Connect sheet 2
5Lock Pin 6*L43 2
6L Handlebar-left 1
6R Handlebar-right 1
7Body height adjustment tube 1
8Foot rest plate 1
9Adjustable leg hold tube 1
10 Backrest pad 1
11L Support sheet 1
11R Support sheet 1
12 Position metal sheet 2
13 Hexagonal bolt M10*35 2
14 Hexagonal bolt M10*30 2
15 Flat washer M10 6
16 Lock Nut M10 6
17 Screw M6*10 4
18 Footrest Plug 1
19 Square inner cap 33.4*33.4 1
20 Foam roller tube 1
21 Lock nut M6 8
22 Frame Plug 1
23 Lock Pin 8*L45 1
24 Hexagonal bolt M8*35 4
25 Flat washer M8 5
26L Cap bag-left 1
26R Cap bag-right 1
27 Hook 1
Part # Description Qty
28 Safety Strap 1
29 Hexagonal bolt M8*45 1
30 Arc cap 32 4
31 Cushion plate 25 1
32 Hexagonal bolt M6*42 6
33 Washer M6 6
34 Wrench 13#/17#*3t 2
35 Hexagonal bolt M10*22 2
36 Handlebar foam 25 2
37 Square inner cap 20*20 4
38 Round inner end cap 25 2
39 Round inner end cap 19 4
40 Square inner cap 25*50 2
41 “C”link pin 1
42 Spring-1 1
43 Square inner cap 30*30 1
44 L-Shaped Hook (Safety Lock) 1
45 Lock nut M8 2
46 Square inner cap 35*35 1
47 Spring-2 1
48 Lab mat 2
49 Foam roller 4
50L Shoulder Support 1
50R Shoulder Support 1
51L Should Support Cap 1
51R Should Support Cap 1

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 8
EXPLODED VIEW
8650IT HARDWARE PACK:
8650IT EXPLODED VIEW:
M8*35mm Hexagonal Bolt (24) - 4PCS
M10*30mm Hexagonal Bolt (14) - 2PCS
M6*10mm Hexagonal Bolt (17) - 4PCS
Lock Nut M6(21) - 4PCS
Lock Nut M10(16) - 4PCS
M6*42mm Hexagonal Bolt(32) - 4PCS
Flat Washer M10(15)
4PCS
Flat Washer M6(33)
2PCS Flat Washer M8(25)
5PCS
Lock Nut M8(45)
1PC
M10*35mm Hexagonal Bolt(13) - 2PCS
M8*45mm Hexagonal Bolt(29) - 1PC
Plug with Ring(5) - 2PCS
Plug with Ring(23) - 1PC
Wrench 13#/17#*3T(34) 2PCS
50R
50L
51R
51L
37
37
25
24
4
21
17
5
5
34
37
21
6R
36
13
14
35
32
32 30
30
1
30
28
32
32
7
43
49
40
41
42
29 21
18
9
49
39
39
39
49
46
45
48
8
40
25
20
21
33
32
39
11R
35
33
3331
44 47
45
33
33
33
19
15
4
26R
10
37
25
21
21
21
21
24
38
17
17
22
12
6L
36
26L
38
11L
2
32
27
13
14
16
16
16
16
16
15
15
15
23
3

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 9
ASSEMBLY INSTRUCTIONS
STEP 1:
A. Take out the Pre-assembled Front and Rear Base A-Frame (1
and 2). Extend the Frame legs so the A-Frame is fully opened.
Make sure the center bars (11L & 11R) are pushed down and
completely extended.
NOTE:
Make sure to attach Part 4 as shown, with the ends pointing
towards the ground and the grooved sections resting securely in
the A-Frame. Make sure that connect sheet is attached inside
the A-Frame. If you are uncertain which adjustment hole in the
Connect Sheet to use, you can start with the center hole and adjust
later if necessary.
B. Attach 2x Connect Sheets (4) to the Backrest
Support Frame (3) as shown. Make sure the Connect Sheets are
securely affixed in their housings on the Backrest Support Frame.
Place 2x M6x10 Screws (17) and 2x M6 Lock Nuts (21) at the hole
in the bottom of the Connect Sheet. This will help ensure the Sheet
does not slide through its housing in case of accidental dislodging.
C. Using the slotted round tops of the attached
Connect Sheets, insert the Backrest Support Frame into the
cradles on top of the A-Frame. Once attached, Secure the Connect
Sheets to the Support Frame with 2x Small Lock Pins (5).
STEP 2:
A. Using 1x M10x35 (13) Hexagonal Bolt and 1x M10x30 (14)
Hexagonal Bolt, attach the Left Handlebar (6L) to the hole in the
Rear Base Frame (2).
B. Place the Left Cap Bag (26L) on the Left side of the Base Frame
before continuing. Do not secure the Velcro attachment yet.
C. Next, attach the curved Position Metal Sheet (12) to the end of
the first Hexagonal Bolt (13) making sure the Connect Sheet (4)
is in the middle. Secure the Hexagonal Bolts (13 &14) with 4 flat
washers (15) and 4 M10 Lock Nuts (16) as shown.
Follow the above instructions to attach the Right Handlebar (6R)
and Right Cap Bag (26R).
D. If open, close the Position Metal Sheets (12) so they rest against
the A-Frame, securing Part 4 in place.
E. IMPORTANT: Attach 2x Hex Bolts M6*10 (17) onto each side
of the base frame after attaching and closing the Position Metal
Sheet (12) on the Base frame. This assembly will prevent the
Backrest Support Frame (3) from slipping out of the housing
during use.
1
14
13
6R 6L
17 17
12
13
14
12
15
11R 11L
2
21
4
4
21
17
17
3
5
5
16

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 10
ASSEMBLY INSTRUCTIONS
A. Raise the Footrest Plug (18) B. Insert (9) with hole
facing upwards
C. Pull plastic string to expand spring
until the metal ring is aligned with the
hole in the rear. Insert Bolt (32) and
secure with Nut (21) and Washer (33).
D. Cut
string and
insert cap
(46).
STEP 3:
A. Insert Foam Roller Tube (20) into bottom opening in Body Height Adjustment Tube (7) as shown, and tighten with 1x (32)
Hexagonal bolt, 1x Flat Washer (33) and 1x M6 Lock Nut (21).
B. Insert the Adjustable Leg Hold Tube (9) into the Adjustment Tube (7). Attach the Footrest Plug (18) to the Adjustment Tube, and
secure the spring to the rear of the Adjustment Tube (7) with 1x M6 Bolt (32), 1x Flat Washer (33) and 1x M6 Lock Nut (21) (See
diagram above left for detailed directions.)
C. Insert 2 x Foam Rollers (49) onto Foam Roller Tube (20) and 2 x Foam Rollers onto the Adjustable Leg Hold Tube (9). Slide the
Foot Rest Plate (8) into bottom of Body Height Adjustment Tube (7) and tighten with 1x M8x45 Hex Bolt (29), 1x Flat Washer (25), and
1x M8 Lock Nut (45).
D. Insert the Body Height Adjustment Tube (7) into the Backrest Support Frame (3) tubing. Secure it with Plug with Ring (23) and
Frame Plug-with spring (22). Make sure that these connections are tight and secure before continuing.
NOTE:
On some models, the Safety Lock will ship attached. If this part is not pre-assembled, please follow Step E:
E. Remove attached hardware and attach the L-Shaped Hook (44) through the hole in the Front of the A-Frame. Secure from the
other side in the following order: 1 x Spring-2 (47), 1 x M8 Washer (25), 1x M8 Lock Nut (45).
32
49
49
49
20
32
45
47
44
22
23
3
45
25
8
9
29 33
21
18
7
33
9
18
21
46
49

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 11
ASSEMBLY INSTRUCTIONS
STEP 4:
Attach the Backrest Pad (10) to the Backrest Support Frame (3)
with 4 x M8 washers (24) and 4 x M8 Hex Bolts (35).
NOTE:
Make sure that Backrest Pad (10) is completely flat when
installing. To properly attach, use Wrench (34) to tightly secure to
Backrest Support Frame and prevent bendind. Failure to properly
attach can result in personal injury
STEP 5:
A. Ensure that the fabric Place Left & Right Cap Bags (26L) &
(26R) are securely placed over the Left & Right sides of the Base
Frame.
B. Clasp hook (27) to the hook opening behind the backrest
support frame. Secure Strap (28) after the sliding it into the hole
in the Front Base Frame.
NOTE:
Secure Strap may already be pre-attached to support frame. If
Attached, hook Clasp Hook (27) into hook opening behind the
backrest support frame
C. Attach and secure Shoulder Support (50L) to backrest support
frame using Should Support Cap (51L) into Backrest Support
Frame (3) and adjust to a comfortable position. If you experience
pressure or discomfort, adjust the Shoulder Support to a higher
setting. Place Should Suppoer (50R) and Shoulder Support Cap
(51R) to opposite side in the same exact height setting.
IMPORTANT:
ALWAYS ensure the Safety Strap is fully engaged and securely
attached, even when the table is not in use.
50R
50L
51R
26R
26L
27
28
51L
10
25
25
24
24

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 12
OPERATING INSTRUCTIONS
• NEVER Place this table where children and those unfamiliar
with the dangers associated with using an inversion table will
have unsupervised and unauthorized access to it.
• Even with the above instruction in place, ALWAYS ensure that
the Safety Lock is fully engaged whenever the table is not in
use.
• ALWAYS ensure that the Safety Strap is fully engaged and
securely attached even when the table is not in use.
• ALWAYS use an adult spotter the first time using this
inversion table, even if you have used an inversion table
before. It is extremely important that the table is properly set
to your body. The Height measurements on the center bar are
guidelines only, and may need to be adjusted depending on
your weight and other factors. The use of an adult spotter is
to prevent potentially life threatening injuries in the case of
sudden and unexpected inversion.
• ALWAYS ensure that the ALL Lock Pins are fully secured in
their housings before using this table. Cease use immediately
if any of the Lock Pins become unsecured during use.
• When you lie down with both arms across your chest the
Inversion Table should rotate a few inches UPWARD. (Your
head should move towards the floor, and your feet towards
the ceiling).
• If the Inversion Table does not move or if it tilts all the way
back, the settings are incorrect. Adjust the center bar until
you are able to achieve the above result.
• As you lift ONE arm upwards over your head, the Inversion
Table will continue to rotate further back up. To stop and
return to normal position, bring your arm back to your side.
• You can increase the angle and speed of rotation by using
both arms.
• If you have trouble getting back up, bend your knees and slide
your bottom down towards your feet. If the Inversion Table
is in the full 90 degree inversion position, grab both sides of
your Inversion Table and pull forward.
• NEVER TRY TO GET UP BY LIFTING YOUR HEAD!
• START SLOWLY!
We recommend for the first time to invert only to 20 or 30
degrees. Spend no more than 5 minutes at any one time in
an inverted position. We recommend inverting for just a few
minutes each time for the first several weeks.
• LISTEN TO YOUR BODY!
If you show signs of overdoing it such as headaches,
dizziness, flushed face, or any discomfort in the ankles,
knees or hips, STOP IMMEDIATELY!
• USE A SPOTTER!
When using a new inversion table, you should always
use an adult spotter to assist with exercises until you are
certain of how this particular table will respond to your
body movements, even if you have used inversion tables
before.
• ANGLES OF INVERSION
Beginners should start at 20 to 30 degrees. This will provide
mild stretching and allow your body to get used to being
upside down.
• Once you feel comfortable, adjust the angle to 50 or 60
degrees. This allows full decompression of the spine. It is
not necessary or required for you to invert at more than 60
degrees. For maximum stretching, invert to 90 degrees.
• OSCILLATION
Raise and lower your arms slowly, back and forth. This will
rotate your body backwards (raised arms) and bring your
back up (lowered arms).
• Getting used to being upside down can take some time.
Start out just a few minutes each day. After your body is
used to being upside down, feel free to invert two or three
times a day.
Please read these instructions carefully.
Failure to comply with the following instructions may increase the risk of serious injury and/or death:

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 13
EXAMPLE EXERCISES
1. Starting position
2. With one arm half raised:
4. With both arms fully raised 5. Fully inverted
3. With one arm fully raised:

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 14
14
WARM UP EXERCISES
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-
down. Do the entire program at least two and preferably three times a week, resting for
a day between workouts. After several months, you can increase your workouts to four
or five times per week.
Warming up is an important part of your workout, and should begin every session. It
prepares your body for more strenuous exercise by heating up and stretching out your
muscles, increasing your circulation and pulse rate, and delivering more oxygen to your
muscles. At the end of your workout, repeat these exercises to reduce sore muscle
problems. We suggest the following warm-up and cool-down exercises:
Inner Thigh Stretch
Sit with the soles of your feet together
with your knees pointing outward. Pull
your feet as close into your groin as
possible. Gently push your knees towards
the floor. Hold for 15 counts.
Hamstring Stretch
Sit with your right leg extended. Rest the
sole of your left foot against your right
inner thigh. Stretch toward your toe as far
as possible. Hold for 15 counts. Relax and
then repeat with left leg extended.
Head Roll
Rotate your head to the right for one
count, feeling the stretch up the left side
of your neck. Next, rotate your head back
for one count, stretching your chin to the
ceiling and letting your mouth open.
Rotate your head to the left for one count,
and finally, drop your head to your chest
for one count.
Shoulder Lift
Lift your right shoulder up toward your ear
for one count. Then lift your left shoulder
up for one count as you lower your right
shoulder.
WARM UP/COOL DOWN EXERCISES

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 15
15
WARM UP EXERCISES CONTINUED
Calf-Achilles Stretch
Lean against a wall with your left leg in
front of the right and your arms forward.
Keep your right leg straight and the left
foot on the floor; then bend the left leg
and lean forward by moving your hips
toward the wall. Hold, then repeat on the
other side for 15 counts
Toe Touch
Slowly bend forward from your waist,
letting your back and shoulders relax as
you stretch toward your toes. Reach down
as far as you can and hold for 15 counts.
Side Stretch
Open your arms to the side and continue
lifting them until they are over your head.
Reach your right arm as far upward toward
the ceiling as you can for one count. Feel
the stretch up your right side. Repeat this
action with your left arm.
WARM UP/COOL DOWN EXERCISES

[e-mail] 1-866-498-5269 MODEL# 8650IT - PAGE 16
CARE & MAINTENANCE
FREQUENTLY ASKED QUESTIONS
IMPORTANT: While no regular maintenance is required, you must inspect the inversion table before each use and replace
any worn, defective, or missing parts. The following conditions could represent potential hazards: Missing parts, improperly
positioned. Cease using trampoline immediately and secure it against unauthorized use if any of the mentioned conditions
are present.
CLEAN THE BENCH WITH A SOLUTION OF WARM WATER AND NON-CORROSIVE/ABRASIVE SOAP.
DAMPEN A RAG WITH THIS SOLUTION AND WIPE COMPLETELY DRY BEFORE USING.
YOU SHOULD ALWAYS DOUBLE CHECK TO MAKE SURE ALL YOUR BOLTS ARE TIGHT AND SECURE, AND THAT
THE LOCK KNOB IS IN PRESENT AND SECURELY IN PLACE BEFORE USE.
Question: “A cushion/pad seems loose, what should I do?”
Answer: MAKE SURE THE BOLTS UNDER THE CUSHIONS ARE SECURE.
Question: “Something was missing from the packaging,” “I need to purchase a replacement part” or “I discovered
a damaged piece. What should I do?”
Answer: CONTACT PURE FITNESS CUSTOMER SERVICE AT: [e-mail] or by calling
this number: 866-498-5269. YOU MUST HAVE YOUR PROOF OF PURCHASE AND/OR ORDER CONFIRMATION
AVAILABLE TO BE CONSIDERED FOR WARRANTY REPLACEMENT. YOU MUST REPORT MISSING PIECES WITHIN
30 DAYS FROM DATE OF PURCHASE. PLEASE BE AWARE THAT UNDER OUR LIMITED WARRANTY, FOR SOME
PARTS WE REQUIRE A PICTURE OF THE DAMAGED ITEM AND/OR RETURN OF THE ITEM TO OUR QUALITY
CONTROL OFFICE FOR REVIEW.