PureLink DD-120 User manual

DD-120 Owner’s Manual
1 x 2 DVI Distribution Amplifier
PureLinkTM
535 East Crescent Avenue
Ramsey, NJ 07446
USA
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
www.purelinkav.com
For order support, please contact your local dealer.
For technical support, please contact us at [email protected]

PureLink by Dtrovision
2
Table of Contents
1-1 Package Contents p.3
1-2 General Specification p.4
1-3 Operation and Reliability Specifications p.5
1-4 Main Features p.6
1-5 Video Connection p.7
1-6 Mechanical Specification p.8
1-7 Technical Specification p.9
1-8 Warranty Information p.10
1-9 Troubleshooting p.11

PureLink by Dtrovision
3
1-1 Package Contents
Please make sure all of the following items are included in the package:
1) DD-120 Unit
2) DC 5V 2A Power supply adapter

PureLink by Dtrovision
4
1-2 General Specification
PureLink DD-120 distribution amplifier is designed to distribute a single PC digital signal
into multiple monitor without any degradation of original signal quality or distortion of
the image. In addition, a dedicated IC chipset makes DD-120 capable of amplifying and
distributing highest quality of video signal and true HD digital contents.
DD-120 is compact, durable and low power consumption design makes it ideal solution
for connection for high definition video and audio signal of digital display device, such as
LCD, Plasma, LED, Projector, and etc.
In addition, DD-120 offers quick and easy plug and play, installation for commercial or
residential system.
Item
Description
Model
DD-120
Input type
DVI Single Link , 1port
Output type
DVI Single Link , 2port,
Graphic Resolution
VGA / SVGA / XGA / UXGA / WUXGA
480i/p , 720i/p , 1080i/p
Connector type
DC Power Jack
DVI 29 Pin Female
Supported format
DDWG DVI 1.0
HDMI 1.3A
HDCP Compliant
Yes
Power Consumption
DC 5V 2A / 10Watt Max
Dimension
7.5’(W)x 4.25’(D)x 1.37’(H) Inch
Weight
1 lbs

PureLink by Dtrovision
5
1-3 Operation and Reliability Specification
1. Operating Environment
Temperature : 50F ~ 104F (10℃~ 40℃)
Humidity : 10% ~ 80%
Altitude : 3,000m Max.
2. Transit Environment
Temperature : -13F ~ 140F (-25℃~ 60℃)
Humidity : 5% ~ 95%
Altitude : 15,000m Max.
3. Storage Environment
Temperature : -4F ~ -49F (-20℃~ 45℃)
Humidity : 5% ~ 95%
Altitude : 3,000m Max.
4. Reliability
MTBF: 90% at over 50,000 hours aging test
In compliance with LCD Monitor reliability test standard

PureLink by Dtrovision
6
1-4 Main Features
1. High Quality Picture - No Signal Loss and Digital Noise Free
Our Distribution Amplifiers are built to deliver the highest quality picture preserving
the native resolutions of the video sources without any signal loss. At the same time,
the digital noises that may affect the picture quality will be eliminated. Due to the
nature of the digital signals and passing through multiple stages of connection when
using distribution amplifiers, it is important to eliminate the digital noises and boost
the signal strength to preserve/enhance the video signal quality.
2. Signal Amplification for signal reliability and long length signal transmission
Our 5V power adapter supplies adequate power to amplify the video signals from the
video source. This is necessary as the overall length from the video source to the
displays is longer when using the distribution amplifiers (distance from the video
source to the distribution amplifier + distance from the distribution amplifier to the
display). In most cases, the overall distance that the DVI signal will need to travel is
over 10ft. Due to the nature of DVI signals, amplification is necessary to warrant the
video quality and reliability. (Without amplification, there may be occasional
blackouts or blinking effects) With this amplification feature, your video display can
be extended up to 2300ft using our fiber optical DVI cables.
3. HDCP (High-bandwidth Digital Content Protection) Compliant
Our DVI distribution amplifiers are fully HDCP compliant. Many video sources such as
DVD players and Satellite/Cable Receivers are HDCP encrypted. For these video
sources to be displayed correctly, HDCP compliant devices (e.g., TV, DVI Switch,
distribution amplifier) are required.

PureLink by Dtrovision
7
1-5 Video Connection
Video Connection
1. Turn off the whole system before connecting.
2. Connect your video source’s DVI output port to the DD-120’s DVI input port using
standard DVI cables (not included).
3. Connect your DVI display’s DVI input port to DD-120’s DVI output port.
4. Plug the 5V power supply to DD-120
5. Plug the 5V wall mount power supply into the wall outlet.
6. Turn on DD-120
7. Turn on your monitor
8. Turn on your video source.
9. Output# 1 and #2 status light will be lit if everything is properly installed.
EDID Management
PureLink DD-120 is capable of capturing and storing EDID of the monitor that is
connected to DD-120. It is essentially important that source graphic adapter must
recognize and understand the EDID of the connected monitor correctly in order to
describe supported display mode to graphic adapter.
Please follow the next instruction of how to save EDID on DD-120
1. Connect a monitor to output # 1 of DD-120
2. EDID indicator light will blink about 2-3 times, if EDID is successfully saved.
3. Please note that EDID indicator light will blinks 5-6 times, if EDID writing is failed.
In case EDID writing fails, you should check your physical connection.
4. Reboot DD-120 for the change to take effect.
***Notice***
Please note that a factory default EDID is set to WUXGA resolution. Thus you need to
save the EDID before you turn your system on.

PureLink by Dtrovision
8
1-6 DD-120 Mechanical Specification
DD-120 Dimension: 7.5’ (W) x 4.25’ (D) x 1.37’ (H) Inch / 1 lb
On/Off switch: Power Switch
POWER: Power Indicator
EDID: EDID Indicator
EDID S/W: EDID save Button
OUT #1, #2: Output Signal Detection LED light
DC +5V: Power Receptacle
INPUT: DVI –D connector
OUTPUT1, 2: DVI Output

PureLink by Dtrovision
9
1-7 Technical Specification
Frequency bandwidth: 1.65 Gbps (Single Link)
Supporting Graphic Resolution: Supports all standard display resolutions up to WUXGA (2048 X
1080 / 1920 X 1200 @ 60Hz), UXGA, SXGA, XGA, VGA & 480i/p, 720i/p, 1080i/p)
Inputs: Single DVI Input / Output: Dual DVI Output /Power supply: DC 5V, 2A Adapter included
Connector Pin Assignment
DVI Input, Output
Part No.
Pin No.
Description
Remarks
DVI-D 29pin
1
TMDS DATA 2M
2
TMDS DATA 2P
3
TMDS DATA 2/4 Shield
4
N.C
5
N.C
6
DDC Clock
7
DDC Data
8
N.C
9
TMDS DATA 1M
10
TMDS DATA 1P
11
TMDS DATA 1/3 Shield
12
N.C
13
N.C
14
5V
15
GND
16
Hot Plug Detect
17
TMDS DATA 0M
18
TMDS DATA 0P
19
TMDS DATA 0/5 Shield
20
N.C
21
N.C
22
TMDS DATA Clock Shield
23
TMDS Clock P
24
TMDS Clock M

PureLink by Dtrovision
10
1-8 Warranty
PURELINK STANDARD LIMITED WARRANTY For Products purchased directly from
PureLink or Dealer, PureLink warrants Products shall be free from defects in
workmanship and materials, under normal use and service, for a period of five (5) years
on parts and three (3) years on labor for PureMedia and Media Axis Products, (39)
months on parts and labor on all PureView products, and three (3) years on parts and
labor for all other Products from date of purchase. Any repaired or replaced equipment
related to Product shall be covered only under the remaining portion of the warranty.
This warranty has no relationship to and exists independently of any warranty offered by
Dealer.
PureLink shall repair or replace the Product if it develops a material fault during the
period of warranty, on condition that i) the Product has only been subject to normal use
in a domestic or commercial environment in a manner consistent with its specification
and functionality, ii) the Product has been cared for reasonably and only subjected to
reasonable wear and tear, iii) the defect has not been caused by willful or negligent
abuse or neglect, or any accident or improper installation procedure, iv) the serial
number of the Product has not been altered or removed.
This warranty only applies to the original purchaser, and shall be the exclusive remedy to
the original purchaser. PureLink shall not be liable for any damages whatsoever caused
by Product or the failure of Product to perform, including incidental or consequential
damages. PureLink shall not be liable for any claim made by a third party or made by the
purchaser for a third party.
Except as expressly set forth in this warranty, PureLink makes no other warranties,
expressed or implied, including any implied warranties of merchantability and fitness for
a particular purpose. PureLink expressly disclaims all warranties not satisfied in this
limited warranty. Any implied warranties that may be imposed by law are limited to the
terms of this limited warranty. This warranty statement supersedes all previous
warranties.

PureLink by Dtrovision
11
1-9 Troubleshooting
Problem
Solution
Distribution Amplifier
does not operate
Make sure the 5V power is plugged in the back of the unit.
Check to see if the power LED light is on.
No picture(or signal)
Or Poor picture
1. In case your video source is HDCP enabled, make sure
your video display (HDTV) is HDCP compliant.
2. If you are using copper based DVI cable, overall length of
the cables (length of the cable from video source to switch
and length of the cable from switch to display) should not
exceed 20ft. Exceeding 20ft. with copper based cables will
result in no or poor picture quality. To extend beyond 20ft,
please use fiber optical DVI extension cables such as
PureLink OC series.
3. Use high quality DVI cables.
4. If you are using computers, try other refresh rate
settings. Most HDTV’s have refresh rate of 48Hz and
computer’s video cards are usually set at higher refresh
rate. Try lower refresh rates.
5. Make sure all DVI connectors are tightly secured to all
DVI ports. Loosened screws on the DVI connectors will
result in no or poor picture.
6. Turn off all equipments (video source, switch and HDTV)
and restart all equipments.
Incorrectly sized picture
/resolution or No picture
Please remember that your video source will only transmit
one resolution setting. To connect varying resolution
displays (1920x1200 resolution display and 1024 x 768
resolution display) the resolution setting of your video
source must be set to the lowest resolution setting (1024 x
768).