PureLink HD-2100 User manual

HD-2100 Owner’s Manual
2 x 10 HDMI Distribution Amplifier
PureLinkTM
535 East Crescent Ave
Ramsey, NJ 07446
Tel: [phone]
Fax: [phone]
Website : www.purelinkav.com
E-mail : [e-mail]
For Technical Support, contact us at
: [e-mail]

Package Contents
Please make sure all of the following items are included in the package:
HD-2100 Unit
DC 12V 4A Power supply adapter
AC Cord
Rack ears
Owner’s Manual

General Specifications
The PureLink HD-2100 2x10 Distribution Amplifier is designed to distribute up to 2 HDMI
outputs (PC, AVR) at full 1080p HD to as many as 10 HD display monitors with no degradation
of the original signal quality or distortion of the image.
The HD-2100’s compact, durable and low power-consumption design makes it an ideal solution
for connection of the high definition video and audio content in digital display devices, such as
an LCD, Plasma, LED, Projector, etc. In addition, the HD-2100 offers quick and easy plug-and-
play installation for commercial or residential systems.
Item
Description
Model
HD-2100
Input Signal
HDMI Single Link , 2 ports
Output Signal
HDMI Single Link , 10 ports
Supporting Graphic
Resolution
Up to WUXGA (2048 X 1080 / 1920 X 1200 @ 60Hz),
UXGA, SXGA, XGA, VGA & 480i/p, 720i/p, 1080i/p)
Frequency bandwidth
1.65 Gbps (Single Link)
Connector Type
DC Power Jack
HDMI19 Pin Female
Supported Version
DDWG DVI 1.0
HDMI 1.3
HDCP Compliant
Yes
Power Consumption
DC +12V 4A , 13W Max
Dimension ( W x D x H )
13.5”x 6.41”x 1.77”In. ( 343 x 163 x 45 mm )
Weight
3.8 Lbs ( 1.7 Kg )

Environmental and Reliability Specifications
1. Operating Conditions
Temperature : 10℃~ 40℃
Humidity : 10% ~ 80%, non-condensing
Altitude : maximum 3,000m
2. Transportation Conditions
Temperature : -25℃~ 60℃
Humidity : 5% ~ 95%, non-condensing
Altitude : maximum 15,000m
3. Storage Conditions
Temperature : -20℃~ 45℃
Humidity : 5% ~ 95%, non-condensing
Altitude : maximum 3,000m
4. Reliability Specifications
MTBF: more than 50,000 hours aging-test at 90% confidence level
Reliability Specifications and item: Conform to “Specification of reliability test
for an LCD monitor”

Main Features
1. High Quality Picture - No Signal Loss / Digital Noise Free
PureLink’s Distribution Amplifiers are built to deliver the highest quality
picture preserving the native resolutions of the video sources without any
signal loss. At the same time, the digital noises that may affect the picture
quality will be eliminated. Due to the nature of the digital signals and
passing through multiple stages of connection when using distribution
amplifiers, it is important to eliminate the digital noises and boost the signal
strength to preserve/enhance the video signal quality.
2. Signal Amplification for reliability and long-length signal transmission
PureLink’s 12V power adapter supplies adequate power to amplify the video
signals from the video source. This is necessary as the overall length from
the video source to the displays is longer when using the distribution
amplifiers(distance from the video source to the distribution amplifier +
distance from the distribution amplifier to the display). In most cases, the
overall distance that the HDMI signal will need to travel is over 10ft. Due to
the nature of HDMI signals, amplification is necessary to warrant the video
quality and reliability. (Without amplification, there may be occasional
blackouts or blinking effects) With this amplification feature, your video
display can be extended up to 2300ft using our fiber optical HDMI cables.
3. HDCP (High-bandwidth Digital Content Protection) Compliant
PureLink’s HDMI distribution amplifiers are fully HDCP compliant. Many video
sources such as DVD players and Satellite/Cable Receivers are HDCP encrypted.
For these video sources to be displayed correctly, HDCP compliant devices(e.g.,
TV, HDMI Switch, distribution amplifier) are required.

Video Connection
1. Connect your video source’s HDMI output port to the HD-2100’s HDMI input
port using standard HDMI cables(not included). Make sure all your HDMI
source and the displays are turned off before connecting the cables.
2. Connect your HDMI display’s HDMI input port to HD-2100’s HDMI output port.
Make sure your HDMI display is turned off before connecting the cables.
3. Plug the 12V power supply into the switch’s power input port.
4. Plug the 12V wall mount power supply into the wall outlet.
5. Turn on power switch
6. Turn on your displays.
7. Turn on your video source.
External EDID and Internal EDID Set up
A. External EDID Set up
i. Unplug all HDMI cables.
ii. Connect Monitor or HDTV to “OUTPUT 1”on the back of the HD-2100
iii. Turn on the HD-2100 and HDTV
iv. Press and hold “EXTERNAL EDID” button on the front of the HD-2100
for 3 seconds until RED LED light is on.
v. Turn off HD-2100
vi. Reconnect all device following above “Video Connection”
B. Internal EDID Set up (Factory Default Setting)
i. Unplug all HDMI cables
ii. Turn on HD-2100
iii. Press ”INTERNAL EDID” button on the front of the HD-2100 for 3 sec
until RED LED light is on.
iv. Turn off HD-2100
v. Reconnect all device following above “Video Connection”
** What is EDID?
Extended Display Identification Data is a VESA standard data format that contains basic information about a display
and its capabilities, including vendor information, maximum resolution, color characteristics, factory pre-set timings,
frequency range limits, and character strings for the monitor name and serial number

Mechanical Specifications
DC 12V : DC Power Input (+12 V)
POWER : Power On / Off Switch
CH1 : Input Channel 1 Indication LED
CH2 : Input Channel 2 Indication LED
SEL : Input Channel Selecting Switch
INPUT1~2 : HDM Input Signal
OUTPUT 1 ~ 10 : HDMI Output Signals
EXTERNAL EDID : External EDID Setting Switch
INTERNAL EDID : Internal EDID Setting Switch

Connector Pin Assignment
Part No.
Pin No.
Description
Remarks
HDMI 19pin
1
TMDS DATA 2P
2
TMDS DATA 2 Shield
3
TMDS DATA 2M
4
TMDS DATA 1P
5
TMDS DATA 1 Shield
6
TMDS DATA 1M
7
TMDS DATA 0P
8
TMDS DATA 0 Shield
9
TMDS DATA 0M
10
TMDS Clock P
11
TMDS Clock Shield
12
TMDS Clock M
13
CEC
14
RESERVED
15
DDC Clock
16
DDC DATA
17
GND
18
+5v
19
Hot Plug Detect

Warranty Information
1 (One) Years Warranty:
Dtrovision warrants this Purelink HD-2100 HDMI Distribution Amplifiers to be free from
defects due to faulty materials or improper workmanship for a period of one (1) year.
Dtrovision further warrants that any part which proves defective in materials or
workmanship within one (1) year, will be replaced or repaired at no cost to the user.
Labor to replace defective parts will be done without charge. Provided the equipment
is returned to Dtrovision prepaid, Insured and properly packaged. Prior return
authorization must be obtained from your local dealer.
This warranty is void if the warranted part has been altered or subjected to abuse or
misuse.
This warranty is in lieu of all other warranties expressed or implied including, without
limitation, any implied warranty or any implied warranty of fitness for a particular
purpose. Dtrovision shall have the final right to determination as to the existence and
cause of any defect and its appropriate adjustment in accordance with the terms of this
warranty. In no event shall Dtrovision be liable for any consequential or collateral
damages.
Warranty Limitation and Exclusion
Dtrovision shall have no further obligation under the foregoing limited warranty if the
product has been damaged due to abuse, misuse, neglect, accident, unusual physical
or electrical stress, unauthorized modifications, tampering, alterations, or service other
than by Dtrovision or its authorized agents, causes other than from ordinary use or
failure to properly use the Product in the application for which said Product is intended.

Troubleshooting
Problem
Solution
Distribution Amplifier
does not operate
Make sure the 12V power is plugged in the back of the unit.
Check to see if the power LED light is on.
No picture (or signal)
Or Poor picture
1. In case your video source is HDCP enabled, make sure
your video display (HDTV) is HDCP compliant.
2. If you are using a copper based HDMI cable, overall
length of the cables (length of the cable from video source
to switch and length of the cable from switch to display)
should not exceed 20ft. Exceeding 20ft. with copper based
cables will result in no or poor picture quality. To extend
beyond 20ft, please use fiber optic HDMI extension cables
such as the Purelink HDX II series
3. Use high quality HDMI cables.
4. If you are using computers, try other refresh rate
settings. Most HDTV’s have refresh rate of 48Hz and
computer’s video cards are usually set at higher refresh
rate. Try lower refresh rates.
5. Make sure all HDMI connectors are tightly secured to all
HDMI ports. Loosened screws on the HDMI connectors will
result in no or poor picture.
6. Turn off all equipment (video source, switch and HDTV)
and restart all equipment.
Incorrectly sized picture
/resolution or No
picture
Please remember that your video source will only transmit
one resolution setting. To connect varying resolution
displays (1600x1200 resolution display and 800x600
resolution display) the resolution setting of your video
source must be set to the lowest resolution setting
(800x600).