PVI Industries 1000PHE125A-TPO User manual

Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
"J" dimension is for the burner housing only.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form PV 6006.
Model
Number
Recovery gph Input
Btu/h
Dimensions
(inches) Blower Motor Shipping
Weight
lbs
40°- 120°F 40°- 140°F A B J HP Volt/Ph/Amps
250 PHE 125A-TPO 250 200 199,000 24 4 17 1/3 115/1∅/8 970
500 PHE 125A-TPO 500 400 399,000 24 5 17 1/2 115/1∅/10 990
750 PHE 125A-TPO 750 600 600,000 27 6 17 1/2 115/1∅/10 1070
1000 PHE 125A-TPO 1000 800 800,000 27 8 17 1/2 115/1∅/10 1110
1250 PHE 125A-TPO 1250 1000 1,000,000 27 8 17 1/2 115/1∅/10 1350
1500 PHE 125A-TPO 1500 1200 1,200,000 27 8 17 1/2 115/1∅/10 1360
Gph
#2 Oil
1.4
2.8
4.3
5.7
7.2
8.6
TURBOPOWER®OIL  PACKAGED WATER HEATER
POLYSHIELD®POLYMER-LINED STORAGE TANK
TANK SERIES 125 GALLONS HORIZONTAL
PV 5458 04/05
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
[phone] [phone] www.pvi.com Product is patented in the U.S., Canada, and Mexico.
VENTING REQUIREMENTS
-.02" TO -.06" W.C. (NEGATIVE PRESSURE)
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED
UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER SIZING, CONSULT VENTING SUPPLIER.
STANDARD ELECTRICAL REQUIREMENTS
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE:
208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR
AN OPTIONAL CONTROL CIRCUIT TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN
AND SPECIFICATION WITHOUT NOTICE.