PVI Industries TURBOPOWER 1000 N 225A-TPO User manual

Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
"J" dimension is for the burner housing only.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form PV 6004.
Model
Number
Recovery gph Input
Btu/h Gph #2 Oil
Dimensions
(inches) Blower Motor Shipping
Weight
lbs
40°- 120°F 40°- 140°F A B J HP Volt/Ph/Amps
250 N 225A-TPO 250 200 199,000 1.4 28 4 17 1/3 115/1∅/8 1380
500 N 225A-TPO 500 400 399,000 2.8 28 5 17 1/2 115/1∅/10 1400
750 N 225A-TPO 750 600 600,000 4.3 42 6 17 1/2 115/1∅/10 1480
1000 N 225A-TPO 1000 800 800,000 5.7 42 8 17 1/2 115/1∅/10 1520
TURBOPOWER®OIL  PACKAGED WATER HEATER
NICKELSHIELD®NICKEL-PLATED STORAGE TANK
TANK SERIES 225 GALLONS
PV 5359 04/05
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
[phone] [phone] www.pvi.com Product is patented in the U.S., Canada, and Mexico.
VENTING REQUIREMENTS
-.02" TO -.06" W.C. (NEGATIVE PRESSURE)
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED
UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER SIZING, CONSULT VENTING SUPPLIER.
STANDARD ELECTRICAL REQUIREMENTS
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE:
208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR
AN OPTIONAL CONTROL CIRCUIT TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN
AND SPECIFICATION WITHOUT NOTICE.