PXM PX 163 User manual

Manual
PX 163
MATRIX DRIVER
48 x 500mA
R

CONTENTS
1. General description...................................................................................................
2. Safety conditions.......................................................................................................
3. Product description....................................................................................................
4. Connection scheme...................................................................................................
5. DMX address setting.................................................................................................
6. Brightness control frequency.....................................................................................
7. Dimensions................................................................................................................
8. Technical data............................................................................................................
9. Declaration of Conformity .........................................................................................
3
3
4
5
6
6
7
7
8
Manufacturer reserves the right to make modifications of the product in order to
improve device operation.
PXM s.c.
ul. Przemysłowa 12
30-701 Kraków, Poland
tel.: [phone]
fax: [phone]
E-mail: [email protected]
Internet: www.pxm.pl
+48 12

3
The PX163 is a 48-channel driver for RGB matrix systems.
Matrix Driver 48 x 500mA is perfect device to control of illumination of big areas composed of
many modular elements. The facades - LED screens or illuminated floors can be used as an
example.
A built-in DMX signal receiver enables to control all 48 channels using the DMX-512 protocol.
A wide range of power supply voltage (7 - 24V DC) and a high outputs load capacity (up to 0.5A
per channel) allow to connect great number of LEDs and - what follows - achieve the effect of a
steady illumination of the whole surface. By dint of 8-bit resolution the control of particular
channels is completely smooth. The additional advantage is implementation of a high-tech
solution - "flicker-free" control frequency, it allows to use the PX163 driver in the installations
created for TV industry applications.
The driver is manufactured in a "common anode" version, what allows to connect LEDs on
a common "+" wire. Small and flat casing of dimensions 158 x 140 x 35 mm is adapted for on-wall
mounting. The terminal block connectors guarantee a quick and easy installation.
MATRIX DRIVER 48 x 500mA powered with safe voltage 7-24V; however, during its installation
and use the following rules must be strictly observed:
1. Installation of equipment, in particular, power connection should be made by a licensed
person, in accordance with this manual.
2. The device may only be connected to DC current (stabilized voltage) with current-carrying
capacity compatible with technical data.
3. Product is designated only to indoor usage. In case of any outdoor usage it should be protected
agains any weather conditions.
4. All the conductors should be protected against mechanical and thermal damage.
5. In the event of any conductor damaging, it should be replaced with the one of the same
technical specification.
6. Connection of DMX signal should be made with shielded conductor.
7. All repairs and connections of outputs or DMX signal can only be made with power off.
8. PX163 should be strictly protected against contact with water and other liquids.
9. All sudden shocks - particularly dropping - should be avoided.
10. The device cannot be turned on in places with humidity exceeding 90%.
11. The device cannot be used in places with temperature lower than +2°C or higher than +40°C.
12. For cleaning use only a damp cloth.
1. General desription
2. Safety conditions

DMX CHANNEL
Control outputs: 48 (OUTPUTS)
1
2
DMX output (DMX OUT)
DMX input (DMX IN)
3
4
1
3 4
2
2
6
5
GND input: 4 (GND IN)
Power supply input: 5 (VCC IN)
5
6
7
8
Power supply outputs: 16 (VCC OUT)
Power and DMX status LEDs
7
8
3. Product description
4

Receivers are connected to the outputs and power supply, as shown in the figure above. For each
line you can determine number of light sources, depending on the wattage and the carrying
capacity of each line is 500mA max. Therefore, when connecting all receivers, sum all the lines
and choose a suitable power supply.
WARNING!!!
Current carrying capacity of a single power supply line can not be greater than
10 A!!!
In order to increase the current carrying capacity of the connection, make connections to several
input lines.
R R R G G G B B B R R R
12V power supply
4. Connection scheme
5
12V DC
power supply
DC
12 V
DC

1
2
3
4
5
6
7
8
9
10
11
12
13
14
70
71
72
73
74
100
101
102
103
104
105
249
250
251
2 3 4 5 6 7 8 9
ON DIP
1 2 3 4 5 6 7 8 9
ON DIP
1 2 3 4 5 6 7 8 9
ON DIP
1
2 3 4 5 6 7 8 9
ON DIP
1 2 3 4 5 6 7 8 9
ON DIP
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
ON
ON
ON
ON
ON
ON
ON
ON
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
1
1
1
1
1
1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
ON
ON
DIP
DIP
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
ON
ON
ON
ON
ON
DIP
DIP
DIP
DIP
DIP
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
ON
ON
ON
ON
ON
DIP
DIP
DIP
DIP
DIP
1
1
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
ON
ON
ON
DIP
DIP
DIP
1
1
1
PX 163 is using 48 consecutive DMX channels. Address of the first channel is set in binary code
using a switch DMX CHANNEL. Setting the value is accomplished by adding the value of
component bits. Here are some examples of setting the start address.
DMX CHANNEL
2 3 4 5 6 7 8 9
ON DIP
1
2
(1)
02
(2)
12
(4)
22
(8)
32
(16)
42
(32)
52
(64)
62
(128)
72
(256)
8
5. DMX address setting
6
The PX163 is using flicker-free technology, which allows to avoid unpleasant flicker effect caused
by lack of proper synchronization between control signal and the LEDs. Applied refresh rate is
1 kHz.
6. Brightness control frequency

ON
1 2 3456 7 8 9
143
158
35
25
10
125
140
7. Dimensions
7
DMX channels:
power supply:
current consumption:
number of output channels:
outputs load capacity:
dimensions:
512
7 - 24V DC
24A max.
48
max. 0,5 A / channel
width: 158 mm
height: 140 mm
depth: 35 mm
8. Technical Data

8
PXM s.c.
ul. Przemysłowa 12
30-701 Kraków, Poland
PX 163
PN-EN 55103-1
PN-EN 55103-2
1. GND wire of the power cable must be connected
to an efficient grounding system.
Marek Żupnik M.Sc., Eng.
MATRIX DRIVER 48 x 500mA
Name of producer:
Address of producer:
declares that the product:
Name of product:
Type:
answers the following product specifications:
EMC:
Additional informations:
Kraków, 01.06.2008
DECLARATION OF CONFORMITY
according to guide lines 89/336/EWG
stage and theatre consoles digital dimmers dmx systems architectural lighting controllers led lighting
tel: [phone]
fax: [phone]+48
e-mail: [email protected]
http://www.pxm.pl
ul. Przemysłowa 12
30-701 Kraków, Poland