PYLE Audio PDPC8T User manual

In-Wall / In-Ceiling Speaker
User Manual
PDPC8T

PYLE AUDIO
PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE
Thank you for choosing Pyle Audio’s In-Wall / In-Ceiling Enclosed Speaker.
Easy 4-Step Installation
1. Cut a hole in your desired location. The hole should be 8” in diameter in order to fit the
speaker. Make sure the length of your speaker wire is sufficiently long enough.
2. Attach the speaker wire to the back of the speaker (see the below diagram).
3. Place the speaker inside the hole you cut.
4. Tighten the screws to secure your speaker in place.
Make sure to check the wattage and ampage of your speaker system while installing this speaker. The
volt transformer should match the settings/specifications of your speaker system. The wattage setting
will depend on the total watts your system can take and how many speakers you are going to use.