Pyle PLVW56MN User manual

1> POWER: Power On /Off
2> TIMER: Timer power off set up. Every press the TIMER key, the
revolving time change selectable. The longest it can keep is 180 minutes
15 ¡ œ 30 ¡ œ 45 ¡ œ 60 ¡ œ 90 ¡ œ 120 ¡ œ 150 ¡ œ 180 ¡ œ
¹Ø
3> DISPLAY : press this key and display the situation of video, press again
and display logo, it exit as if press again.
4> MUTE key: Press this key, sound disappear; press again or VOL -/+ key,
s
the sound return normally
5> P.P  press once Form settle  press again Standard, ( press

again) soft ( press again) brightness, four
kinds of forms, can choice according to your interesting.
6> GAME Named  Russia Shape , press GAMEwill introduce menu£º
function of operation , additional press SYSTEM start or stop.
7> CALENDAR: From 1900 to 2099(two hundred years), press  CH+/- to
adjust the year number, press  VOL+/-to adjust the month number.
8> AV/TV: press this key, monitor display the signal of AV1
9> VOL +/- Control the volume and also as a function to adjust the menu£º
10> MODE: Press once, the menu can revolving to select, then press  VOL-
or VOL+to adjust the item number
BRIGHT COLOR CONTRAST HUE
11> CH +/-: Menu option select
12> SYSTEM/INVERT: picture up/down,left/right reverse function
13>LANGUAGE: OSD menu font with Chinese, English, Arabic, Russian,¡¢ ¡¢ ¡¢ ¡¢
German are selectable to display.
Technical Specification
*power voltage 12V DC 10% 650mA 
*power consumption 7.8W
*Video input 1Vp-p(PAL NTSC)
*pixel format 960(W)X234(H)
*color system PAL NTSC
*overall dimension 172X116X29(mm)
*viewing area  115X84 (mm)
*screen size 5.6 
*operate temperature 0 ~ 60  storage temperatur  10 ~ 85  
*net weight 490g 20g
Accessories
*TFT Color Monitor 1 pc
*TFT color monitor booklet 1 pc
* DC/Audio/Video line(compose ) 1 pc
* Remote control SPR-N56 1 pc
* Plastic stand 1 pc
Maintenance
To avoid electrical shock, do not open the enclosure .high voltage is
present. No user serviceable parts inside the enclosure
Do not use any chemical solvent. Cleaning angent or corrosive detergent
to clean away dirt on the surface of the screen. To clean off dirt or finger print,
we recommend use a soft damp lens cleaning cloth.
Should there be requirement to replace blown fuse, do remember to
disconnect all power supply and switched off the unit before replacing it with
a new one . use only correct rating fuse to avoid damaging the unit.
OFF
Whole indication & illumination
Receiving sensor
Active Display Area
VOL-
Power Switch
INVERT
Power Light
MODE
MEN U
VOL -
POW ER
INV ERT
S terminal
VOL+
VOL +
Audio in
Video in
DC+12V
DC-
Remote contr ol
Remote Control