Remote ControlSystem
Battery
Installadon
1.
Sleep mode control selector
2. Mute mode control selector
3.
Input mode selector(iPod,
PM,
AUX)
4. Tuner control area
S.
iPodIiPhoneliPad control area
6.
B888
volume adjust selector
7.
Treble volume adjust selector
8.
Clock selector
9. Alarm selector
10. SWvolume adjust selector
11. Adjust settings
12. Alarm onIoffselector
13. Return to the previous menu when select
the clock/alarm.
Since the remote control will beused for many units to control operations, you should begin byinstalling
the supplied battery:
1.
Tum the remote control overand pull out
the
battery comparbnent cover.
2. Insertthe battery according to the
battery
comparbnent
3. Close the battery compartment cover.
4. Testthe unitbypressing Mute or any mode key.
If
the battery is inserted correctly, the system will
response to the instruction.
Note
• Do not leave the remote control inan extremely hot or humid place.
• Do not expose the remote sensor
to
direct sunlight orlighting apparatuses. Doing so may cause a
malftmc1ion.
•
If
you do notintend to use the remote control for an extended period
of
time, remove the batteries to
avoidpossible damage frombatteIy leakage and corrosion.
•
If
you find that the remote control can be used ata normal distance to the mainunit, then the batteIy
couldbe weak, so youneed to replace
the
battery with a
new
one.
• Ifbattery leak, remove itimmediately, and properly dispose
it
Avoid touching the leakedmaterial and
splashing it to clothing, etc. Clean the battery comparbnent thoroughlybefore installing new battery.
Basic Operation
PowerUp
the
System
Connect theAC adaptor and torn onthe "power" in the back panel, the system will open automatically.
SelectSleep Mode
Sleep
mode
allows you to make the system sleep
at
a selected time.
1.
Press"O"key or press the sleep button on the front panel to select an amount
of
time before the system
shuts off:
5,
IS, 30minutes or off.
2.
Wake
up the system bypressing the same
key
whenthe system inthe sleep mode.
.4.