Pyle PLVHR70 User manual

INSTRUCTION MANUA
L
PLVHR70

Thank you for the purchase of this Super slim design 7 inch Color TFT-LCD
monitor.Before operating the unit,please read this manual thoroughly and
keep it for future reference.
PANEL
PLVHR70
SHARP TFT-LCD
12345 6
1.Power:Power on/off
Press this button to turn on the monitor,press again to turn the monitor
off.
2.Brightness/color/contrast negative adjustment
To adjust brightness,color or contrast negatively.
3.SEL:to activate the menu and select brightness,color or contrast.
4.Brightness/color/contrast positive adjustment
To adjust brightness,color or contrast positively.
5.AV:to change video signal sources between V1/V2.
6.Remote control receiver
The device has the function of Picture-Flip,it allows you to rotate the screen
180 degrees and have the picture automatically flip so you can view the
picture upside-down!So you can mount the monitor up side-down in a car.
NOTE:Although the effective pixels for the liquid crystal is given as 99.98% or
more,0.02% of pixels
may not light or may light incorrectly.It is a very common phenomenon in active
matrix display
technology,do not indicate fault or broken of the unit.
Contents and specifications can be subject to change without prior notice.

REMOTE CONTROL
Power: Power on/off
Brightness adjustment
Color adjustment
Contrast adjustment
PP: Select among the preset display mode
(MEMORY-STANDARD-SOFT-VIVID-LIGHT)
V1/V2: Change between V1 and V2.
SYS: Image zoom
POWER
WIRING
23mm
RED: DC 12V+
RED: V1 INPUT
YELLOW: V2 INPUT
BLACK: GROUND
NSTALLATION
1.STAND ALONE BRACKET
2.HEADREST BRACKET