Pyle PLHRQD7B User manual

MS 11122703A
7
7
II TFT/LCD Video Quad Monitor
XI. Panel button function
1.Mode: Split image swi1ch
2.TFTMENU
3. Power:ON/OFF
4. Decrease brightness,contrast,color, vol, etc
5.lncrease brightness,contrast,color, vol, etc
XII.PACKAGING LIST
SN NAMES QUANTITY
1 Host 1
2 Remote controller 1
3
User's Manual 1
4
Power Cable
1
5 Small
bracket(optional)
1
.. TFT/LCD Video Quad Monitor
USER·S MANUAL
Please read this Manual thoroughly before using this product and keep
it well for future reference.

77
.. TFT/LCD Video Quad Monitor
Thank you for purchasing our products.To enjoy all the features of this
product and ensure it free offault as long as possible,please read this
Manual thoroughly and follow the instructions herewith accordingly:
1.No parts of this product can be repaired by user himself.ln case of
faults,shut off the power immediately,and consult us or our dealers,
As this
product is made of precise electronic components, unauthorized
detachment or reassembly may damage it
2.00 not expose this device in moisture,dirt,smoke,vapor or direct
sunshine.
3.00 not use thinner or other chemical cleaner to clean the device.Please
use
soft wet cloth to clean the dirt if any on the device.
4.Keep the monitor far from extremely hot or cold places,storage
temperature of this device is-20°C-+65°C
5.Avoid dropping or bumping this device.
CAUTIONS:
For your safety,driver please do not watch the Monitor while you are driving
.. TFT/LCD Video Quad Monitor
X. REPLACE BATTERY
In normal conditions, the battery has 1 year life (or shorter, it depends
on the operating conditions). The lower the power of battery is, the
narrower the working range
of the power is.
Precautions of lithium battery
• Please keep the battery out of reach of children, if children has
swallowed the batteries, please ask
doctor for help.
• Clean the batteries with dry cloth so as to ensure they are
in good
contact
• When installing batteries, make sure they are properly fit
in polarity.
• Do not use metal clamp to clip the batteries, in order to prevent
short circuit.
WARNINGS!
If improperly handled, the batteries may explode, do not charge the
batteries, decompose them or put it into fire.
Installation procedures of batteries:
• Take out battery card: press down the card bolt,
pullout the battery card
• Replace the batteries: place
in battery card, with anode (+) upward
• I
nsert battery card: insert the battery card to the original place
Back of remote controller
Battery slot
Battery
Card bolt

7 7
7
7
480RGB(W)X234(H)

7 7
II TFT/LCD Video Quad Monitor
IV.ADDITIONAL INFORMATION
Precautions of remote controller
• Do not place the remote controller on dashboard, steering wheel or
any other place under direct sunlight especially in summer, where
there is high temperature which may deform the remote controller.
• When parking the car
in the sun, please place the card-style remote
controller
in toolkit or other safe places.
• When exposed in direct sunlight, signal emitting from the remote
controller may not be properly received by the monitor. It should
be
place nearer to the inductor of frontal panel ofthe host.
ON LCD
• Do not press the screen of LCD, otherwise distortion or other fault
may occur. the image may become unclear or LCD may
be damaged.
• Precautions
of cleaning
Uses a little wet soft cloth to clean the screen.
Do not use solvent such as gasoline, thinner, cleaner
in the market
or anti static spray to dean the screen.
Do not use this product when environmental temperature is lower
than -20°C or higher than 65°C
• If you
park your car in an extremely cold or hot place, the video
may become unclear, it is not a fault, when the temperature in car
returns to normal level, the video will become clear.
II TFT/LCD Video Quad Monitor
• Static blue or red spot may appear on the monitor, this is called light
spot, it is a common phenomenon for any kind
of LCD. LCD is a very
precise device, more than 99.99%
segment is normal, but less than
0.01 %
segment may be flaw, however, this will not affect your visual
effects.
V.Connection of DVD player
1 Yellow 1Video input 1
2 Yellow 2 Video input 2
3 Yellow 3Video input 3
4 Yellow4 Video input4
5 Red "+"
6 Black GND
7 Blue
Resverse lamp
2
3
4
5
6
7