q-Tech QSW-6300 Series Installation and operating manual

HARDWARE INSTALLATION AND REFERENCE GUIDE
www.qtech.ru
QSW-6300 Series Switches
Hardware Installation and Reference Guide

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
2
Contents
1. PRODUCT OVERVIEW 5
1.1. QSW-6300 Series Switches 5
1.2. Package Contents 6
1.3. QSW-6300-32T 6
1.3.1. Technical Specifications 6
1.3.2. Product Appearance 8
1.3.2.1. Front Panel 8
1.3.2.2. Rear Panel 9
1.3.3. Power Supply 9
1.3.4. Heat Dissipation System 9
1.3.5. LED 10
1.4. QSW-6300-52T 11
1.4.1. Technical Specifications 11
1.4.2. Product Appearance 13
1.4.2.1. Front Panel 13
1.4.2.2. Rear Panel 14
1.4.3. Power Supply 14
1.4.4. Heat Dissipation 14
1.4.5. LED 15
1.5. QSW-6300-32F 16
1.5.1. Technical Specifications 16
1.5.2. Product Appearance 18
1.5.2.1. Front Panel 18
1.5.2.2. Rear Panel 19
1.5.3. Power Supply 19
1.5.4. Heat Dissipation 19
1.5.5. LED 20
1.6. Power Supply Modules 21
1.6.1. QSW-M-6300-PWR 21
1.6.1.1. Specifications 22
1.6.1.2. Features 23
1.6.1.3. LED 23
2. PREPARING FOR INSTALLATION 24
2.1. Safety Precautions 24
2.1.1. General Safety Precautions 24
2.1.2. Handling Safety 24

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
3
2.1.3. Electric Safety 24
2.1.4. Electrostatic Discharge Safety 25
2.1.5. Laser Safety 25
2.2. Installation Environment Requirements 25
2.2.1. Ventilation Requirements 25
2.2.2. Temperature/Humidity Requirements 25
2.2.3. Cleanliness Requirements 26
2.2.4. Grounding Requirements 26
2.2.4.1. Safety Grounding 27
2.2.4.2. Lightning Grounding 27
2.2.4.3. EMC Grounding 27
2.2.5. Lightning Protection Requirements 27
2.2.6. EMI Consideration 28
2.3. Precautions for Fiber Connection 28
2.4. Tools 28
3. INSTALLING THE SWITCH 29
3.1. Installation Procedure 29
3.2. Preparing 29
3.3. Mounting the Switch 29
3.3.1. Mounting the Switch into a Cabinet 30
3.3.2. Mounting the Switch on a Workbench 30
3.4. Installing and Removing the Power Supply Module 31
3.4.1. Installing the AC Power Supply Module 31
3.4.2. Removing the AC Power Supply Module 31
3.5. Connecting the Ground Cable of the Switch 32
3.6. Connecting the External Interface Cables 32
3.6.1. Simple Connection Steps 32
3.7. Bundling the Cables 32
3.7.1. Simple Bundling Steps 33
3.8. Verifying Installation 33
4. VERIFYING OPERATING STATUS 34
4.1. Setting up Configuration Environment 34
4.1.1. Setting up Configuration Environment 34
4.1.2. Connecting the Console Cable 34
4.1.3. Setting Terminal Parameters 34
4.2. Checking Environment before/after Power-on 36
4.2.1. Checking Environment before Power-on 36

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
4
4.2.2. Checking Environment after Power-on (Recommended) 36
5. MONITORING AND MAINTENANCE 37
5.1. Monitoring 37
5.1.1. Indicator 37
5.1.2. CLI Commands 37
5.2. Maintenance 37
5.2.1. Ventilation System Maintenance 37
5.2.2. Power Supply Module Maintenance 37
5.2.3. Replacing Lithium Battery 38
5.2.4. Replacing Fuses 38
6. TROUBLESHOOTING 39
6.1. General Troubleshooting Procedure 39
6.2. Common Troubleshooting Procedures 39
6.2.1. Fault 1: The system login password is lost. 39
6.2.2. Fault 2: The AC power supply module does not work. 39
6.2.3. Fault 3: The serial port console has no output. 40
6.2.4. Fault 4: The serial port console outputs illegible characters. 40
6.2.5. Fault 5: The newly-inserted service card module fails to be powered on. 40
6.2.6. Fault 6: The link cannot be set up between fiber interfaces. 40
7. APPENDIX 42
7.1. Appendix A Connectors and Media 42
7.1.1. 1000BASE-T/100BASE-TX/10BASE-T Port 42
7.1.2. Optical Fiber Connection 43
7.2. Appendix C Lightning Protection 43
7.2.1. Installing AC Power Arrester (Lightning Protection Power Strip) 43
7.2.2. Installing the Ethernet Port Arrester 44
7.3. Appendix D Cabling 45
7.3.1. Requirement for the Minimum Cable Bend Radius 46
7.3.2. Requirement for the Minimum Fiber Bend Radius 46
7.3.3. Precautions for Cable Bundling up Cables 46
7.4. Appendix E Site Selection 49
8. ОБЩАЯ ИНФОРМАЦИЯ 50
8.1. Замечания и предложения 50
8.2. Гарантия и сервис 50
8.3. Техническая поддержка 50
8.4. Электронная версия документа 50

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
5
1. PRODUCT OVERVIEW
QTECH QSW-6300 series switches are the next-generation Layer 3 switches. Featured with high
performance, reliable security, and multiple services, QSW-6300 series switches are mainly
applicable to the convergence layer of large-scale networks to provide full line-rate exchanging.
Complete QoS features differentiate services according to business needs to ensure the prompt
transmission of key data. The QSW-6300 series switches provide various interfaces to meet the
requirement for interfaces in network constructions.
1.1. QSW-6300 Series Switches
Model
10/100/1000
Base-T
Ethernet
Port
1000M
SFP
Port
10G
SFP+
Port
MGMT
Port
USB
Port
Conso
le Port
Fan
RPS
QSW-6300-
32T
24
N/A
8
1
1
1
3 built-
in fans
Dual
QSW-6300-
52T
48
N/A
4
1
1
1
3 built-
in fans
Dual
QSW-6300-
32F
8
24 (8
combo)
8
1
1
1
3 built-
in fans
Dual
Note:
A combo port consists of one 1000 BASE-X SFP port and one 10/100/1000 BASE-T
Ethernet port. That is, only one port of them is available at a particular time.
SFP+ port supports both 10G BASE-R and 1000 BASE-X.
PoE+ ports are downward compatible with PoE.
QSW-6300 series switches have the following external ports:
MGMT port: This port is a 10/100/1000M management port. It is used to connect with
an Ethernet port of a PC to perform program. Users can do remote management and
maintenance for the switch through the port. Use standard network cables when the port
is connected with an Ethernet port.
USB port: The Universal Serial Bus (USB) port is used to connect with USB memory to
save logs, host versions, warnings and other diagnostic messages.
Console port: This port applies RS-232 interface electrical level and standard RJ45
connectors. It is used to connect the serial ports of the terminal PC to perform tasks
including system commissioning, configuration, maintenance, management, and
software loading.
Note:
The QSW-6300 series switch is a class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take adequate measures.

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
6
1.2. Package Contents
Item
Quantity
Switch
1
Mounting Bracket
2
Rubber Pad
4
Mounting Bracket Installation Guide
1
M4x8 Phillips Countersunk Screw, GB819-
85
8
Grounding Cable
1
Management Software (Pre-installed)
1
1.3. QSW-6300-32T
1.3.1. Technical Specifications
Model
QSW-6300-32T
CPU
Dual-core with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
4 GB
SDRAM
1 GB
SFP Module
Type
SFP+ interface
SFP module, SFP BIDI module
SFP+ module, SFP+ cable, SFP+ BIDI module
See Appendix B.
Note:
The module types may update without prior notification. Please
contact QTECH Networks for details.

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
7
Model
QSW-6300-32T
Power Supply
Module Slot
2 slots
Supported AC module: The switch supports QSW-M-6300-
PWR
AC input:
Rated voltage: 100 V AC to 240 V AC
Maximum voltage: 90 V AC to 264 V AC
Frequency: 50/60 Hz
Rated current per input: 3 A (150 W power supply)
SFP Port
Supported
10GE SFP Port Downward Compatible
SFP+ Port
10G BASE-R Capable
1000 BASE-X Capable
Power
Consumption
< 60 W
Temperature
Operating temperature: 0ºC to 45ºC (32°F to 113°F) (altitude from
0 m to 1800 m (1.12 miles))
The highest operating temperature decreases by 1°С (1.8°F) as
the altitude ranging from 1800 m (1.12 miles) to 5000 m (3.11
miles) increases by every 220 m (721.78 ft.).
Storage temperature: -40ºC to 70ºC (-40°F to 158°F)
Humidity
Operating humidity: 10% to 90% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing)
Operating
Altitude
0 to 5000 m (0 to 3.11 miles)
Fan
Speed adjustment and fault alarm
Note:
QSW-6300 has 2 fans
Temperature
Alarming
Supported
EMI
Certification
GB9254-2008CLASS A
Safety
Regulation
Compliance
GB4943-2011
Dimensions
(W x D x H)
440 mm x 340 mm x 44 mm (17.32 in. x 13.39 in. x 1.73 in.)

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
8
Model
QSW-6300-32T
Weight
4.4 kg (9.70 lbs.)
1.3.2. Product Appearance
The QSW-6300-32T Ethernet switch provides 24 10/100/1000 BASE-T Ethernet ports, eight
10GE SFP+ ports, one MGMT port, one USB port, and one Console port on the front panel, two
power supply module slots and one expansion slot on the back panel.
Figure 1-1 Appearance of QSW-6300-32T
1.3.2.1. Front Panel
Figure 1-2 Front Panel of QSW-6300-32T
Note:
1. System LED
2. Power Supply Status LED (PWR1)
3. Power Supply Status LED (PWR2)
4. MGMT Port Status LED
5. Console Port
6. 10/100/1000 BASE-T Ethernet Port
7. Port Status LED
8. 10GE SFP+ Port
9. USB Port
10. MGMT Port

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
9
1.3.2.2. Rear Panel
Figure 1-3 Rear Panel of QSW-6300-32T
Note:
1. Grounding Lug
2. Filler Panel (Expansion Module)
3. Filler Panel (Non-expansion Module)
4. Power Module Slot 1
5. Power Module Slot 2
1.3.3. Power Supply
QSW-6300-32T supports 2 power supply modules.
Dual-power input: The switch can be powered by one power supply module, or two power supply
modules. When both modules are working, the switch is working in power redundancy mode.
1.3.4. Heat Dissipation System
The switch uses left-to-right airflow for heat dissipation, thereby ensuring the normal function of
the device in the specified environment. Maintain a minimum clearance of 100 mm (3.94 in.)
around the chassis for air circulation.
Figure 1-4 Airflow Direction

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
10
1.3.5. LED
LED
Panel
Identification
Status
Meaning
System status
LED
Status
Off
The switch is not powered on.
Blinking
green
(3 Hz)
Initialization is in progress.
Continuous blinking indicates a
fault.
Blinking
green (10
Hz)
It is used for on-site positioning
of the device, and allows
operation and maintenance
personnel to perform remote
power on and off control.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:
1. The temperature of inlet/outlet
vent exceeds the warning
threshold.
2. The power is insufficient for the
system.
Check the workingenvironmentof
the switch and power supplies
immediately.
Solid red
3. The temperature of the
inlet/outlet vent exceeds the
warning threshold.
4. The switch is faulty.
Power supply
status LED
PWR1/PWR2
Off
The power supply module is
not in place or not powered on.
Solid green
The power supply module is
operating normally.
Solid yellow
The power model is identified
but not recognized.
Solid red
The redundant power is faulty
or the AC power cord is not
connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000
Mbps.

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
11
LED
Panel
Identification
Status
Meaning
MGMT port status
LED
MGMT
Blinking
green
The port is receiving or
transmitting data at 1000
Mbps.
Solid yellow
The port is connected at
10/100 Mbps.
Blinking
yellow
The port is receiving or
transmitting data at 10/100
Mbps.
10GE SFP+ port
status LED
25F-32F
Off
The port is not connected.
Solid green
The port is connected at 1/10
Gbps.
Blinking
green
The port is receiving or
transmitting data at 1/10 Gbps.
10/100/1000
BASE-T Ethernet
port status LED
1-24
Off
The port is not connected.
Solid green
The port is connected at 1000
Mbps.
Blinking
green
The port is receiving or
transmitting data at 1000
Mbps.
Solid yellow
The port is connected at
10/100 Mbps.
Blinking
yellow
The port is receiving or
transmitting data at 10/100
Mbps.
1.4. QSW-6300-52T
1.4.1. Technical Specifications
Model
QSW-6300-52T
CPU
Dual-core with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
4 MB
SDRAM
1 GB

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
12
Model
QSW-6300-52T
SFP Module
Type
SFP+ interface
SFP module, SFP BIDI module
SFP+ module, SFP+ cable, SFP+ BIDI module
See Appendix B.
Note:
The module types may update without prior notification. Please
contact QTECH Networks for details.
Power Supply
Module Slot
2 slots
Supported AC module: The switch supports QSW-M-6300-
PWR
AC input:
Rated voltage: 100 V AC to 240 V AC
Maximum voltage: 90 V AC to 264 V AC
Frequency: 50/60 Hz
Rated current per input: 3 A (150 W power supply)
SFP Port
Supported
10GE SFP Port Downward Compatible
SFP+ Port
10G BASE-R Capable
1000 BASE-X Capable
Power
Consumption
< 70 W
Temperature
Operating temperature: 0ºC to 45ºC (32°F to 113°F) (altitude from 0
m to 1800 m (1.12 miles))
The highest operating temperature decreases by 1℃(1.8°F) as the
altitude ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles)
increases by every 220 m (721.78 ft.).
Storage temperature: -40ºC to 70ºC (-40°F to 158°F)
Humidity
Operating humidity: 10% to 90% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing)
Operating
Altitude
0 to 5000 m (3.11 miles)
Fan
Fan speed control
Fan fault alarming
Note:
QSW-6300

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
13
Model
QSW-6300-52T
Temperature
Alarming
Supported
EMI
Certification
GB9254-2008CLASS A
Safety
Regulation
Compliance
GB4943-2011
Dimensions
(W x D x H)
440 mm x 340 mm x 44 mm (17.32 in. x 13.39 in. x 1.73 in.)
Weight
4.5 kg (9.92 lbs.)
1.4.2. Product Appearance
The QSW-6300-52T Ethernet switch provides 48 10/100/1000Base-T Ethernet ports, four 10GE
SFP+ ports, one MGMT port, one USB port, and one Console port on the front panel, as well as
two power supply module slots on the back panel.
Figure 1-5 Appearance of QSW-6300-52T
1.4.2.1. Front Panel
Figure 1-6 Front Panel of QSW-6300-52T
1. System Status LED
2. Power Supply Status LED (PWR1)
3. Power Supply Status LED (PWR2)
4. MGMT Port Status LED

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
14
5. Console Port
6. 10/100/1000Base-T Ethernet Port
7. Port Status LED
8. 10GE SFP+ Port
9. USB Port
10. MGMT Port
1.4.2.2. Rear Panel
Figure 1-7 Rear Panel of QSW-6300-52T
1. Grounding Lug
2. Filler Panel
3. Filler Panel (Non-expansion Module)
4. Power Supply Module Slot 1
5. Power Supply Module Slot 1
1.4.3. Power Supply
The QSW-6300-52T supports two power supply modules. Dual-power input: The switch can be
powered by one power supply module, or two power supply modules. When both modules are
working, the switch is working in power redundancy mode.
1.4.4. Heat Dissipation
QSW-6300-52T uses left-to-right airflow for heat dissipation, thereby ensuring the normal
function of the device in the specified environment. Maintain a minimum clearance of 100 mm
(3.94 in.) around the chassis for air circulation.
Figure 1-8 Airflow Direction

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
15
1.4.5. LED
LED
Panel
Identification
Status
Meaning
System status
LED
Status
Off
The switch is not powered on.
Blinking
green
(3 Hz)
Initialization is in progress.
Continuous blinking indicates a
fault.
Blinking
green (10Hz)
It is used for on-site positioning
of the device, and allows
operation and maintenance
personnel to perform remote
power on and off control.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:
1. The temperature of
inlet/outlet vent exceeds the
warning threshold.
2. The power is insufficient for
the system.
Check the working environment
of the switch and power
supplies immediately.
Solid red
1. The temperature of the
inlet/outlet vent exceeds the
warning threshold.
2. The switch is faulty.
Power supply
status LED
PWR1/PWR2
Off
The power supply module is
not in place or not powered on.
Solid green
The power supply module is
operating normally.
Solid red
The redundant power is faulty
or the AC power cord is not
connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000
Mbps.
Blinking
green
The port is receiving or
transmitting data at 1000 Mbps.

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
16
LED
Panel
Identification
Status
Meaning
MGMT port status
LED
MGMT
Solid yellow
The port is connected at
10/100 Mbps.
Blinking
yellow
The port is receiving or
transmitting data at 10/100
Mbps.
10GE SFP+ port
status LED
49F-52F
Off
The port is not connected.
Solid green
The port is connected at 1/10
Gbps.
Blinking
green
The port is receiving or
transmitting data at 1/10 Gbps.
10/100/1000
Base-T Ethernet
port status LED
1-48
Off
The port is not connected.
Solid green
The port is connected at 1000
Mbps.
Blinking
green
The port is receiving or
transmitting data at 1000 Mbps.
Solid yellow
The port is connected at
10/100 Mbps.
Blinking
yellow
The port is receiving or
transmitting data at 10/100
Mbps.
1.5. QSW-6300-32F
1.5.1. Technical Specifications
Model
QSW-6300-32F
CPU
Dual-core with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
4 GB
SDRAM
1 GB

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
17
Model
QSW-6300-32F
SFP Module
Type
SFP+ interface
SFP module, SFP BIDI module
SFP+ module, SFP+ cable, SFP+ BIDI module
See Appendix B.
Note:
The module types may update without prior notification. Please
contact QTECH Networks for details.
Power Supply
Module Slot
2 slots
Supported AC module: The switch supports QSW-M-6300-PWR
AC input:
Rated voltage: 100 V AC to 240 V AC
Maximum voltage: 90 V AC to 264 V AC
Frequency: 50/60 Hz
Rated current per input: 3 A (150 W power supply)
SFP Port
100 BASE-X Capable
1000 BASE-X Capable
SFP+ Port
10G BASE-R Capable
1000 BASE-X Capable
Power
Consumption
< 77 W
Temperature
Operating temperature: 0ºC to 45ºC (32°F to 113°F) (altitude from
0 m to 1800 m (1.12 miles))
The highest operating temperature decreases by 1℃(1.8°F) as the
altitude ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles)
increases by every 220 m (721.78 ft.).
Storage temperature: -40ºC to 70ºC (-40°F to 158°F)
Humidity
Operating humidity: 10% to 90% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing)
Operating
Altitude
0 to 5000 m (3.11 miles)
Fan
Fan speed control
Fan fault alarming
Note:
QSW-6300 has 2 fans
Temperature
Alarming
Supported

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
18
Model
QSW-6300-32F
EMI
Certification
GB9254-2008CLASS A
Safety
Regulation
Compliance
GB4943-2011
Dimensions
(W x D x H)
440 mm x 340 mm x 44 mm (17.32 in. x 13.39 in. x 1.73 in.)
Weight
4.3 kg (9.48 lbs.)
1.5.2. Product Appearance
The QSW-6300-32F Ethernet switch provides 24 GE SFP ports (port 17-24 do not support the
rate of 100Mbps), eight 10/100/1000 BASE-T combo ports, eight 10GE SFP+ ports, one MGMT
port, one USB port, and one Console port on the front panel, two power supply module slots and
two expansion slot on the back panel.
Figure 1-9 Appearance of QSW-6300-32F
1.5.2.1. Front Panel
Figure 1-10 Front Panel of QSW-6300-32F
1. System Status LED
2. Power Supply Status LED (PWR1)
3. Power Supply Status LED (PWR2)
4. MGMT Port Status LED
5. Console Port
6. 10/100/1000 BASE-T Ethernet Port
7. GE SFP Port Status LED

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
19
8. GE SFP Port
9. 10GE SFP+ Port Status LED
10. 10GE SFP+ Port
11. USB Port
12. MGMT Port
1.5.2.2. Rear Panel
Figure 1-11 Rear Panel of QSW-6300-32F
1. Grounding Lug
2. Filler Panel (Expansion module)
3. Filler Panel (Non-expansion module)
4. Power Supply Module Slot 1
5. Power Supply Module Slot 1
1.5.3. Power Supply
The QSW-6300-32F supports two power supply modules. Dual-power input: The switch can be
powered by one power supply module, or two power supply modules. When both two modules
are working, the switch is working in power redundancy mode.
1.5.4. Heat Dissipation
The QSW-6300-32F uses left-to-right airflow for heat dissipation, thereby ensuring the normal
function of the device in the specified environment. Maintain a minimum clearance of 100 mm
(3.94 in.) around the chassis for air circulation.
Figure 1-12 Airflow Direction

QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
20
1.5.5. LED
LED
Panel
Identification
Status
Meaning
System status
LED
Status
Off
The switch is not powered on.
Blinking
green
(3 Hz)
Initialization is in progress.
Continuous blinking indicates a
fault.
Blinking
green (10 Hz)
It is used for on-site positioning of
the device, and allows operation
and maintenance personnel to
perform remote power on and off
control.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:
1. The temperature of inlet/outlet
vent exceeds the warning
threshold.
2. The power is insufficient for
the system.
Check the working environment
of the switch and power supplies
immediately.
Solid red
The switch is faulty. For details,
see Troubleshooting.
Power supply
status LED
PWR1/PWR2
Off
The power supply module is not
in place or not powered on.
Solid green
The power supply module is in
place and operational.
Solid red
The redundant power is faulty or
the AC power cord is not
connected.
MGMT port
status LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000
Mbps.
Blinking
green
The port is receiving or
transmitting data at 1000 Mbps.
Solid yellow
The port is connected at 10/100
Mbps.