Q-Waves Quicklink TV Kit User manual

WWW.Q-WAVES.COM
Easily link your PC to your TV
with Quicklink in-room Wireless!
GETTING STARTED

PLEASE READ AND SAVE THIS IMPORTANT
PRODUCT INFORMATION IN A SAFE PLACE
Thank you for purchasing this Q-WAVES product, we are here to help with any problems you may
have. If you do have any issues with this Q-WAVES product please refer to the quick start guide
and the comprehensive user manuals on the installation CD. 99% of issues can be resolved using
these materials however, if you still have a problem, please contact us by any of the following
methods:
PLEASE REFER TO WWW.Q-WAVES.COM
FOR THE LATEST SOFTWARE UPDATES
We declare under our sole responsibility the QuicklinkTV conforms to the following directives and norms:
EMC Directive 2004/108/EC
EMC: EN55022, EN55024
ETSI: EN301 489-33; EN301 489-1; EN302 065; EN61000-3-2; EN61000-3-3
Low Voltage Directive 2006/95/EC
Electrical Safety: EN 60950-1:2006
Indoor Granted Product Notice
This equipment may only be operated indoors. Operation outdoors in violation of 47 U.S.C.301 and could subject the operator to serious
legal penalties.
To help us keep you up to date on all Q-WAVES products
email [email protected] with the following details:
Name & Address
Product Name
Date of Purchase
Place of Purchase
Comments or Suggestions
!!! STOP !!!
Declaration of Conformity Q-WAVES Ltd
REGISTER
YOUR PURCHASE
This equipment may only be operated with the power supply provided in this package.
It is strictly prohibited to operate the equipment with any other power supply.
The equipment operating temperature range is 0 to 40 degrees Celsius.
This equipment may only be connected to a computer that has an approved LPS.
Customer Support
([phone] • ([phone]
[e-mail]
Model
Device adapter: 601SD-D
PC Adapter: 601SD-D
A/V base: WSR-AVB-001
FCC ID
RN2601SD-D
CE 1588
Korea Certification
Device Adapter Computer Adapter
Certificate Number: Certificate Number:
UWB-WSR601M-HD3U UWB-WSR601M-HD2U
Power Supply
AC/DC power supply:
Input: 100-240VAC, 50/60Hz, 0.3A;
Output: 5VDC, 2A
Mass of Equipment: Up to 0.5Kg

Box Contents PC Adapter
Installation Device Adapter
1 3
24
2 x Wireless USB’s:
• 1 x Wireless USB PC Adapter
• 1 x Wireless USB Device Adapter
FREE HDMI Cable
USB TV Adapter Dock
GUIDE
WARRANTY
Power Supply Unit
Quick Start Guide
Installation CD & Warranty
System Tray
PC ADAPTER
You can either wall mount or table mount your USB dock
Insert the CD and install software drivers
(a new grey icon will appear in the sytem tray )
Note: Please refer to the “How to video” for more details & step-by-step instructions
Plug the PC Adapter into a USB port on your PC or laptop
(the tray icon turns red )
Keep the PC Adapter in an upright position only
3 4
For wall mounting
Close the shutter
& insert the USB
Device Adapter into
the USB port
For table top positioning
Flip open the shutter & insert
the USB Device Adapter into
the USB port
Keep the Device Adapter in an upright position only

Wiring Positioning
5 6
1. Connect the USB TV Adapter Dock using the HDMI cable provided
1a. As an alternative you can use a combination of VGA and Audio 3.5mm cables
2. Connect the power cable, (the tray icon turns green and the display icon appears )
3. Set the TV input signal according to the cable used (HDMI or VGA)
Remove the sticker before you connect the power and audio cable
The green connector is for the audio (3.5mm)
5 6
To ensure proper device pairing, the PC Adapter & the the USB TV Adapter Dock should be placed no
more than 3m apart (or 10ft), within the line of sight
You can now watch on your TV anything that is playing on your laptop or PC (‘Mirror mode’ is set as a
default)
If this is not the case please right-click the Wireless USB Manager taskbar icon and select
‘Troubleshooting’
In ‘Mirror mode’ the screen resolution is chosen automatically for both the laptop or PC and the TV. A
better resolution my be found under the display icon in the tray, ‘Advanced’

System Requirements When streaming online video make sure the
‘Enable hardware acceleration’ is deselected on
your Flash Player
When playing a video...
For best performance:
1. The PC Adapter & the USB TV Adapter Dock should be placed no more than 6m apart (or 20ft), within the line of sight
2. The PC Adapter & the USB TV Adapter Dock should be mounted in a vertical position
3. The recommended minimum system requirements are:
• For office use, web browsing etc, at least 1.6GHz Core Solo processor and 1GB memory
• For full screen video, 720p playback etc, at least 1.8GHz Core2 Duo processor and 1GB memory
1. If available it is recommended to use
‘Optimize for Video’ mode
2. Use ‘Extend mode’ and limit the extended
screen resolution to 720p (1280x720)
A
Under the display icon in the tray
B
Need more info? Right-click the Wireless USB Manager taskbar icon and select ‘Troubleshooting’
1. Right-click on the video you’re watching, choose ‘Settings’
2. Deselect ‘Enable hardware acceleration’
7 8

Frequently Asked Questions
Q. What is the difference between “Mirror mode” and “Extend mode”?
A. In ‘Mirror mode’ what you see on the laptop or PC screen is also seen on the TV (including icons), while in ‘Extend mode’ the
remote display extends from your laptop or PC screen (excluding icons) onto your TV screen. In ‘Extend mode’ you can let your
family or friends watch a movie streaming from your laptop or PC on your TV while you for example, can continue working on your
documents, emails and facebook account displayed on the laptop or PC screen.
Q. What is the range of the Quicklink TV Kit?
A. The Quicklink TV Kit is targeting in-room usage. Wireless connectivity is not expected to be available through walls (room-to-room).
The actual range depends on the visual content type (pictures, presentations and standard Internet content with a range of 10m (or
30ft) and 720p video or Internet HD content with a range of 5-7m (or 15-20ft) and the system configuration. Improved performance
will be achieved by positioning the 2 adapters where possible facing each other and have them at the same height.
Q. I have a Full HD TV but I can’t set the screen resolution on it to 1920 x 1080 which is the native resolution of this TV.
A. The maximum screen resolution supported by the product is 1440 x 1050, 720p.
Q. I have started watching a movie and then connected the PC Adapter. The picture is showing on my TV but the sound did not switch to the TV.
A. Please restart the player after connecting the PC Adapter, to allow the default audio device to switch to the USB audio device. This
doesn’t happen automatically after the player was already activated.
Q. I am working in ‘Mirror mode’ and when the device connects, the screen resolution changes on both my TV and my laptop, from the original
native resolution.
A. This is normal when working in ‘Mirror mode’ as the system is using a common resolution for the laptop and the TV as it needs to
display an identical picture on both. In ‘Extend mode’ it is possible to play with the screen resolution of each individual screen, using
the windows screen settings.
Q. I am connected to my TV in HDMI mode and the picture on the TV is too big (only part of my laptop screen is showing)
A. In some cases, with different TV brands, the TV by default is setup to a specific resolution, and is not scanning the HDMI for
supported resolutions. This can usually be resolved by entering the TV setup screen and looking for a method for enabling the HDMI
scan (or switching to ‘PC mode’ if available). If this mode is not available please try to select different screen resolutions in the TV
until you find one that fits the resolution you have selected on your laptop screen settings.
Q. I am connected to my TV in HDMI mode and the picture on the TV is too small (black areas are seen around the picture).
A. In some cases, with different TV brands, the TV by default is setup to a specific resolution, and is not scanning the HDMI for
supported resolutions. This can usually be resolved by entering the TV setup screen and looking for a method for enabling the HDMI
scan (or switching to ‘PC mode’ if available). If this mode is not available please try to select different screen resolutions in the TV
until you find one that fits the resolution you have selected on your laptop screen settings.
Q. I am watching a YouTube movie and the picture is corrupted.
A. When running flash based viewers or real player based viewers (such as YouTube, DailyMotion etc.) the movie should be played
after deselecting the ‘Enabling hardware acceleration’ in the player. (Right-click on the video window -> Settings -> and Deselect the
‘Enable hardware acceleration’ check box).
Q. I am watching a movie inside a window on Windows 7 or Windows Vista while having another application in another window and the fonts
flicker between sharp and fuzzy.
A. Please disable the ‘Optimize for Video’ option in the ‘DisplayLink’ icon in the task bar as it applies compression to the text resulting
with the issue described.
Q. The picture has disappeared and the ‘DisplayLink’ icon in the task bar is not showing.
A. Try unplugging the PC Adapter and then plug it it back in again, if this does not resolve the issue, unplug the host adapter, reboot
the laptop and only after the laptop has re-booted fully, plug the adapter back in.
Q. The PC Adapter is attached to the laptop, but I see the grey icon in System Tray.
A. Please try the following:
Disconnect and re-attach PC Adapter, if this doesn’t help, exit from the Wireless USB Manager (right-click the System Tray icon and
select Exit) and restart the Wireless USB Manager. If this still doesn’t help, disconnect the PC Adapter, restart the laptop and then
re-connect the PC Adapter.
Q. I am using Windows Media Player and sometimes during movie play in full screen mode the media player application window becomes black.
A. Please try resizing the application window.
9 10

WWW.Q-WAVES.COM
Easily link your PC to your TV
with Quicklink in-room Wireless!
GETTING STARTED