Qihan PTZ User manual

3
Intelligent High Speed Dome

1
Operation Manual of Intelligent High Speed Dome Camera
Intelligent High Speed Dome Camera
Operation Manual
(English Version)
Please read this manual carefully before installation and use
(Announcement: This manual will be subject to revision without further
notification)

2
Operation Manual of Intelligent High Speed Dome Camera
Precautions:
1.Non-techinician is forbidden to operate this dome device before reading this manual carefully.
2.Cut the power supply off before operating the dome device to avoid damage caused by mal-operation.
3.Interior of the Dome device are precision optical and electrical instruments. Heavy pressure, shock and other
incorrect operations should be prevented. Otherwise, may cause damage to the product.
4.Please do not remove or disassemble any internal parts of dome video camera by self in order to avoid normal
usage being impacted. There is no part inside the device, which can be repaired by users themselves.
5.All the wiring of the dome device should be conducted strictly according to the wiring instruction. When
necessary, thunder-proof, surge-proof and other protecting measures should be carried out.
6.Please do not use the product under the situations of exceeding specified temperature, humidity or power
supply specifications.

3
Content
Chapter One Product Overview........................................................................................................................................1
I. Performance instruction:............................................................................................................................................1
II. Featured Functions Instruction:................................................................................................................................1
Chapter Two Wiring and Setup of Dome System.............................................................................................................3
I. Wiring of Dome System ............................................................................................................................................3
II. Setting of Dome Device communication .................................................................................................................4
Chapter Three Fast Operation Guide of Dome Device....................................................................................................6
I. Wiring .......................................................................................................................................................................6
II. Setting protocol and baud rate..................................................................................................................................6
III. Setting dome device address...................................................................................................................................6
IV. Install camera. .........................................................................................................................................................7
V. Connect the power of dome device...........................................................................................................................7
VI. Controller setting ....................................................................................................................................................7
VII. Start testing............................................................................................................................................................7
VIII. Complete the test. (Summary)..............................................................................................................................7
Chapter Four -English Operation Menu of Dome Device...............................................................................................9
I. Operation Instructions ...............................................................................................................................................9
II. Tree Menu List. ......................................................................................................................................................10
1.Language Options............................................................................................................................................11
2.Display Options................................................................................................................................................11
3.Control Options................................................................................................................................................14
4.System Options ................................................................................................................................................16
5.Camera Options................................................................................................................................................18
6.Function Programming ....................................................................................................................................24
7. UserAdmin.....................................................................................................................................................30
8. Date/Time........................................................................................................................................................32
Chapter Five Short-cut Operations and Specification of Dome Device.......................................................................35
Charpter Six Main Technical Parameters ......................................................................................................................37
Chapter Seven Trouble Shooting of Dome Device..........................................................................................................38

1
Operation Manual of Intelligent High Speed Dome Camera
Chapter One Product Overview
I. Performance instruction:
1. Address of dome device is from 0～255. The number (address) of dome device in the control system is setup by
the hardware (8-digit on and off switch) of dome device.
2. Integrated multi-protocol and auto protocol differentiation. Note: The dome device only auto differentiate
controller of the first communication.
3. Pan 360°continuous rotation．
4. Tilt 90°action plus 2°angle adjustment．Plus the 2 degree adjustment, the view angle is -2°～ 90°.
5. Pan manual operation speed range from 0.1°to 300°/S
6. Tilt manual operation speed range from 0.1°to 120°/S
7. 220 pershot positions. (A fixed position that aimed by the dome camera, which can be set and revised by user
arbitrarily)
8. The maximum running speed when preshot is being called can reach 400°/S with accuracy of ±0.1°.
9. Compatible with many kinds of Module Camera.(Sony, Hitachi, Sanyo, Yoke, CNB, LG, Samsung)
10. Power supply:AC 24V1A(indoor type), AC 24V2A(outdoor type)
11. Easy installation interface.
12. Pass environmental protection grade IP66 (outdoor type)
13. Adopts long distance RS-485 transmission mode
14. Transmission speed, i.e. baud rate is selectable .(Set by the fifth and sixth bit of the on and off switch of the dome
device. 2400bps~19200bps)
II. Featured Functions Instruction:
1. Multi-language operation menu and function display．
2. Display of camera name, operation position and angle.(The name of the camera can be edited and the coordinate
angle of the dome device can be displayed on the screen.)
3. Operation crosshair function．(With crosshair on the screen, the target can be captured more effectively.)
4. 6 PTZ tours operation with 2 minutes record of each tours.(Can real-time monitor and record the action of
manual operation)
5. 8 groups of programmable vector scans (including scan speed, dwell time, preshot and interruption between
tours)
6. Vertical auto flip function with 10°automatic forward tracing
7. 8 zones of programmable sectional mask. (Can mask part of the sectors of camera, which differs depending on
camera types)
8. 8 sectors of programmable sectional display. (Can display the name and nature of concrete position shooting by
the camera, which differs depending on different types of camera)
9. The dome device will auto enter into function running after self-test or no communication for a certain time.

2
Operation Manual of Intelligent High Speed Dome Camera
(Dwell time can be set from 1 to 999 seconds)
10. Image frame freezing function.(freez picture function)
11. Operation return function.(after executing operation return, the dome device will return to the previous operation)
12. Intelligent manual scan function.(execute this function in manual pan operation, you can adjust the manual pan
operation)
13. Intelligent power off real time memory.(If power was cut off when a certain function is in operation, the dome
device can resume working at where the power is cut off.)
14. High efficient 3-dimension scan.
15. Camera zoom in speed limit function.(When it was zooming in, the speed of the dome device will auto slow
down.)
16. User management .(User can be divided into administrator and general operators)
17. Operation authorization .(Administrator can perform setup of respective authorities for general operators)
18. Display & setting of date& time .
19. Assignment programming. (timed operation function) (Users can assign different operation for the dome as per
needed.)
20. Timer of startup and shutdown (Users can set the operating time for the dome as per actual use situation, to
extend the life of the product.)
21. Strong alarm and warning mechanism (User can set automatically enable or disable alarm as well as its operating
time and mode for various alarm inputs and outputs of the dome according to actual situation.)
22. Real-time temperature display (User can ON/OFF the display of real-time operating temperature of the dome)
23. Temperature alarming setting.
24. High-temperature shutdown setting
25. Notice：Different control equipment , The operation method is different, please refer to the users manual of
the control equipment at the same time

3
Operation Manual of Intelligent High Speed Dome Camera
Chapter Two Wiring and Setup of Dome System
I. Wiring of Dome System
1．Basic system connection(One dome device)
From the basic system connection, user can understand the electric wiring attribute of the dome device and bring
great operation convenience of installation, testing and demo. When using this product for the first time, please read
carefully and follow this electric wiring drawing as any wrong wiring may lead to permanent damage of the dome
device or damage of other equipment.
!Attention: No operation when the dome device is power on.
Yellow-Green Interphase Color
Yellow-Green Interphase Color
Orange RS485A(+)
Yellow RS485B(-)
BNC Video Output
RedBl
ack
Description about Connections forAlarming Function：
No.1 Alarm Input: Red and White
No.2 Alarm Input: Yellow and White
No.3 Alarm Input: Grey and White
No.4 Alarm Input: Orange and White
No.5 Alarm Input: Brown
No.6 Alarm Input: Green and White
No.7 Alarm Input: Brown and White
No.8 Alarm Input: Bule and White
No.8 Alarm Input: Gray and White
Alarm Intput Public Terminal（COM1）: Black/White
No.1 Alarm Constant ON Output（NO1）: Blue and Green
No.1 Alarm Output Public Terminal（COM1）: Blue
No.2 Alarm Constant ON Output（NC2）: Brown and Green
No.2 Alarm Output Public Terminal（COM2）: Green
The brown wire
stranded with alarm input
wire is the alarm system
ground
Connected to
Ground
Controller of
the Dome
Power Supply of Dome
Display
External Connection for Alarm Input/Output
AC24V Input

4
Operation Manual of Intelligent High Speed Dome Camera
2. Multi-dome device connection
When connecting many dome devices together, the user can embed multi-device system with auxiliaries such as
arrester device, video matrix, DVR and alarm box for system integration.
AC24V: Power supply of dome device, which will convert 110V/60HZ or 220V/50HZinput to AC 24V output and
supply to the dome device.
RS-485 Bus: It is for the control signal(RS-485 signal)output of controller, connecting to the communication input
terminals of control cable of each dome device.
Video: It is for image signal output of dome device, (can directly output to video equipment such as monitor or
video matrix. Take care of the match up of impedance.)
II. Setting of Dome Device communication
Before installation and use, the setting of communication protocol and transmission speed (baud rate) should
comply with the control system.
1．Setting protocol and baud rate of dome device.

5
Operation Manual of Intelligent High Speed Dome Camera
Attention: the protocol and
baud rate of dome device should
comply with those of controller,
which need to be restarted after revision.
2. Address setting of dome device
Dome device range: 0~255.
On/Off
status
Protocol type
1st
digit
2nd
digit
3rd
digit
4th
digit
5th
digit
6th
digit
PELCO-D
ON
ON
OFF
OFF
**
**
PELCO-P
OFF
ON
OFF
OFF
**
**
DYNACOLOR
ON
OFF
OFF
OFF
**
**
ULTRACK
OFF
OFF
ON
OFF
VICON
OFF
OFF
OFF
OFF
**
**
On/Off
status
Baud rate
5th
digit
6th
digit
2400
OFF
OFF
4800
OFF
ON
9600
ON
OFF
19200
ON
ON
协
议
设
置
波
特
率
设
置
拔
码
开
关
This figure shows protocol of
PELCO-D, Baud rate of 2400
Setting address for dome
device (this figure shows the
address of dome device No 1).
On/Off switch
Setting method: The sum of switch numbers when it is at
ON position is the address of dome device.
Calculation example of dome device address:
（2+4+16=22）the address is 22.
1
2
4
8
16
32
64
128
Matching numbers
24 16
On/off switch
and matching numbers
On/Off
switch
Baud rate setting
Protocolsetting

6
Operation Manual of Intelligent High Speed Dome Camera
Chapter Three Fast Operation Guide of Dome Device
I. Wiring .
!Attention: No operation when the dome device is power on.
II. Setting protocol and baud rate.
The figure shows: Protocol: PELCO-D The figure shows:Auto detection protocol.
Baud rate: 2400 bps Baud rate: 2400bps
(Please refer to detailed parameter in next chapter) (Please refer to detailed parameter in next chapter)
III. Setting dome device address.
The figure shows: Address of the dome device: No. 1
(Please refer to detailed parameter in next chapter)
This dip switch located on PCB in the dome device
Set address for
dome
Protocol
setting
Baud rate
setting
Protoco
l setting
Baud rate
setting
(Please do not turn the power on)
(Turn the power off when setting, and restart the device after revision)
Orange RS485A(+)
Yellow RS485B(-)
Controller of
the Dome
Yellow-Green Interphase Color
Yellow-Green Interphase Color
BNC Video Output
Red
Black
External Connection for Alarm Input/Output
AC24V Input
Connected to
Ground
Power Supply of Dome
Display