QiLocks PL707 User manual

Combination Lock Product Guide
Item No.: PL707
Material: Zinc alloy , ABS,brass
Features:
Keyless convenience
User can set their own codes easily
Master key control, emergency override
10,000 combinations available
Retrieve the combination by tool when forget password
Application for metal ,wooden and plastic doors
Can be used on doors with a thickness up to 20mm
www.qilocks.com [email protected] [phone]

Operating Instructions
To unlock: Enter the factory code "0-0-0-0", turn the knob to the open position, and then open the door
To lock: Close the door, turn the knob to the close position, scramble the code
(Notes: do not leave the correct codes displayed)
Set Code Instructions
a. Enter the current code, turn the knob to the open position
b. Set any 4 digit code
c. Turn the knob to the close position
d. Scramble the code
Operate with the Manager Key
a. Insert the master key
b. Turn the knob to the open position
c. Open the door
Note: If opened in error ,use the master key to turn knob to close position,
the original code will continue to operate the lock
If the code is forgotten, follow the search code Instruction to find code
Search Code Instructions
a. Insert the master key to open the door
b. Remove the master key
c. Turn the knob to the close position
b. Insert search tool into the holes (back of lock)
e. Push in search tool and simultaneously turn the dials until they stop
f. The code displayed is the current code
www.qilocks.com [email protected] [phone]

Install Guide
1. Cut the mounting hole 74.3X29.2mm
2. Install the lock on the door
3. Chose the different size installation plate to
suit the different thickness of door ,the max up to 20mm
4. Fix four screws
For door thickness For door thickness
0.5~12mm 12~20mm
www.qilocks.com [email protected] [phone]