QJMOTOR LTR150 2024 User manual

PREFACE
Welcome to the world of motorcycling!
As the owner, you are benefiting from the vast experience and newest technology
regarding the design and manufacture of high-quality products, which have earned us a
reputation for dependability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages of
your vehicle. The Owner’s Manual does not only instruct you in how to operate, inspect
and maintain your vehicle, but also how to safeguard yourself and others from trouble and
injury.
In addition, the many tips given in this manual will help keep your vehicle in the best
possible condition. If you have any further questions, do not hesitate to contact your
dealer. Our team wishes you many safe and pleasant rides. So, remember to put safety
first!
Our company continually seeks advancements in product design and quality.
Therefore, while this manual contains the most current product information available at
the time of printing, there may be minor discrepancies between your vehicle and this
manual. If there is any question concerning this manual, please consult your dealer.

IMPORTANT NOTES
1．Rider and passenger
The motorcycle is designed to be used by only one rider and one passenger.
2．Road conditions for riding
This motorcycle is suitable for riding on-road.
3. Please read this operation and maintenance manual carefully. Following the break-in
instructions in this manual will keep your motorcycle running stably and allow the engine to reach its
full performance.
Please pay special attention to matters preceded by the following words:
Warning: means that casualties may be caused if the methods in this manual are not followed.
Caution: means that if the methods in this manual are not followed, personnel may be injured or
parts may be damaged.
Note: providesuseful information.
This operation and maintenance manual shall be regarded as a permanent part of the
motorcycle. Even if the vehicle is sold to a new owner, this operation and maintenance manual shall
be handed over to the new vehicle owner.
It is strictly prohibited to copy or reprint any part of this manual.
Special engine oil is used for lubricating parts of this vehicle.

SPECIAL NOTICE
Warning: this motorcycle is equipped with a main fuse that must meet the standard
requirements to run safely. DO NOT use fuses of incorrect specifications or other conductive
objects; otherwise it will lead to damage to parts, fire, and/or a serious accident.
Pay special attention:
*When installing or replacing the battery for the first time, pay attention to distinguish
between positive and negative connections. If the battery connections are reversed, please
check if the main fuse is intact. However, if the fuse is intact or not, take the motorcycle to
your maintenance center for inspection to prevent damage to electrical components due to the
reversed battery connection. If any damaged components continue to work, they could lead to
some unpredicatable faults;
*Before replacing the fuse, turn off the ignition switch to prevent accidental short circuits;
*Do not damage the fuse bayonet when replacing the fuse, otherwise it will cause poor
contact, component damage and even accidental fire.
Loading: DO NOT change the location of original accessories or add any that will
change the vehicle handling characteristics. Adding arbitrary accessories will seriously affect

the stability and safety of your motorcycle and could lead to loss of control or operational
issues. Meanwhile, according to road traffic safety laws, no unit or individual shall assemble
motor vehicles or change the registered structure, structure or characteristics of motor
vehicles without authorization.
QJMOTOR Motorcycle will not bear all quality problems and consequences (including
loss of warranty) caused by users' unauthorized modification or installation of unauthorized
parts. The user is requested to comply with the regulations of the traffic management
department on the use of vehicles.
When riding your motorcycle, ALWAYS wear a motorcycle helmet that meets the national
road safety standard.

1
Safety Information
Safe riding tips
1. The vehicle must be inspected before driving in order to
avoid accidents and damage to the vehicle.
2. The driver must pass the examination of the traffic
management department and obtain a driving license consistent
with the permitted vehicle before driving. Vehicles are not
allowed to be lent to people who do not have a driver's license
or who are not qualified to drive.
3. In order to avoid the harm of other motor vehicles, the
driver should be as conspicuous as possible. To this end, please:
⚫ Wearing brightly colored clothing.
⚫ Do not ride close to other motor vehicles.
4. Strictly abide by traffic rules and do not speed through
traffic.
5. Most accidents occur because of speeding, so the speed
must not exceed the maximum speed limit of the road section.
6. Turn on the turn signal indicators early when turning or
diverting to attract the attention of others.
7. At intersections, car park entrances and exits and fast
lanes, special attention should be paid.
8.Be sure to drive with both hands. Driving with one hand
is extremely dangerous. The occupant should hold the safety
handrail tightly and step on the pedals with both feet.
9. Motorcycle modification or disassembly of the original
parts, which will not ensure the safety of driving, at the same
time is illegal, and will affect the vehicle warranty.
10. The configuration of accessories must not affect the driving safety
and operating performance of the motorcycle, especially the overload of
electrical systems will easily cause danger.
11. Don't run the engine in a closed space. Exhaust fumes
can cause harm to people's health.
Wear a safety helmet
The helmet, which meets safety and quality standards, is the
first item of motorcycle body protection equipment. The worst
accident is a head injury. Please be sure to wear a safety helmet,
and it is best to wear protective glasses.
Protective apparel
You must be comfortable and colorful. Do not allow any
loose clothing to get caught in the levers, this could cause an
accident. In order to drive safely, please wear flat shoes.
Precautions for riding on rainy days
Special attention should be paid to slippery roads on rainy
days, because the braking distance is longer on rainy days. Please
avoid painted street markings, manhole covers and oily pavement
when driving to avoid skidding. Be particularly careful when
passing through railway crossings, railings and bridges. If the
road conditions can not be clearly judged, driving should be
slowed down significantly.
Loading
When the motorcycle is overloaded, there will be an
abnormal sense of direction, overload may cause accidents or
damage to the motorcycle, please note:
⚫ The maximum load of the under seat storage box is 22 lbs.
⚫ the maximum load of the front box is 3.3 lbs.
⚫ the maximum load of the rear luggage rack is 6.6 lbs.

2
Motorcycle Serial Number
Frame numbers and engine numbers are used to register
motorcycles. When ordering accessories or requiring special
services, this number enables the distributor to provide you
with better service.
Please record the number for reference.
①Frame number: engraved at the end of the frame (under
the seat).
②Product badge: riveted on the middle and lower
mounting seat on the right side of the frame.
③Engine number: engraved at the bottom of the engine
on the left side of the crankcase.
Frame number: _________________________________________________
Engine number: ________________________________________________
Parts Location
⑴ Left handlebar switch
⑽ Side stand
⑵ Speedometer ⑾ Center stand
⑶ Right handlebar switch ⑿ Under seat storage
⑷ Front brake lever ⒀ Rear brake lever
⑸ Throttle ⒁ Luggage hook
⑹ Ignition switch ⒂ Front box
⑺ Rear view mirror ⒃ Passenger footrest
⑻ Battery position (under floorboard)
⑼ Passenger grab rail
Note: this model is equipped with either CBS braking or
ABS braking.
Note: the pictures in this manual are for reference only,
they may differ from your actual product.

3
LTR150 model status
Meter & Indicators
(1) Left turn signal indicator or left
and right turn signal indicator
(optional)
a○ If the model you choose is a
non-ABS braking model: this graphic
symbol is a left steering signal light
indicator. When the steering signal of
the left handle is hit to the left, the
green turn of the instrument panel
indicates that the light will flicker
accordingly.
b○If you choose a model for ABS
braking status: this graphic symbol is
a left / right steering signal indicator.
When the left hand turn signal to the
left or right, the instrument panel
green to the left or right turn
indicates that the light will flicker accordingly.
(2) High beam headlight indicator:
When the headlight high beam is lit, the blue highlight
indicator lights up and displays the " " sign.

4
(3) Engine failure indicator:
When the ignition switch is switched on, the engine
fault indicator light will come on and the fuel pump will
cycle for 3 seconds. Start the motorcycle, if the
indicator light turns off, operation is normal and
without codes; if the indicator light is on, there is a
stored fault code. While riding at any time if the fault
indicator lights up, you should stop the engine
immediately and contact your dealer to have the
motorcycle inspected before further use.
(4) Right turn signal indicator or ABS indicator
(optional): a○ If the model is a non-ABS braking model: this
graphic symbol is a right turn signal light indicator. When the
turn signal switch is pressed to the right, the instrument
panel green light turns on to the right indicating that the
light will blink accordingly.
b○ If the model is an ABS model: this graphic symbol is the
ABS indicator light showing the working status of the ABS
system, as described in the following: "ABS use and
maintenance instructions" (p. 20).
(5) Coolant temperature display:
Indicates the temperature of coolant in the vehicle, the
"C" position indicates a low coolant temperature, and the
"H" position indicates a high coolant temperature.
(6) Fuel gauge:
Represents the amount of fuel in the fuel tank. When
the indicator of the fuel meter is in the E area, when the
fuel level is 1 grid or less than 1 grid, the fuel indicator
symbol will keep flashing, indicating that the fuel is
insufficient, please refill the fuel as soon as possible.
(7) Speedometer:
The speedometer indicates the current speed.
(8) Odometer:
Depending on your needs, you can select the small mileage
(TRIP) or total mileage (TOTAL) feature on the odometer.
Small mileage (TRIP): a mileage meter that can be cleared
and records the range mileage for a certain period of time.
In the small mileage (TRIP) state, press and hold (9)
to clear the small mileage to zero.
Total mileage (TOTAL): records the full mileage that has
been driven.
The default unit is mph. You can choose whether to display
mileage unit in km/h or mph by using the (9) button.

5
(9) Left function button A:
Function
Power Supply
Displayed A (left button)
Results
Mileage function switching
one
TOTAL
<3 seconds
TRIP A
TRIP A
<3 seconds
TRIP B
TRIP B
<3 seconds
TOTAL
TRIP A or TRIP B
>3 seconds
TRIP A or
TRIP B zero clearance
Unit switching
TOTAL
>3 seconds
Speedometer and odometer
unit miles switch
(10) Right function button B:
Press and hold for >3 seconds to adjust the clock (24h format).
(11) Automatic start and stop function indicator
The automatic start and stop control unit (SSCU) is installed in the right rear of the frame and to the lower right of the fuel
tank. When the automatic start and stop control unit detects an anomaly, the indicator light will be displayed in different
long and short flash patterns.
Function
number
Pattern
description
Detailed instructions.
Automatic start and stop indicator status
1
Start and stop
function
activation
1. Automatic start and stop enable switch: On
2 Engine cylinder head temperature > 149°F
3. First ride speed > 10mph and lasts 3 seconds
4. System voltage > protection voltage of electric cell
Note: after the above four are satisfied at the same time,
the automatic start and stop indicator light is lit and the
automatic start and stop function is activated.
After the automatic start and stop function
is activated, the indicator light is
temporarily on until the mode is switched.
2
Automatic
When the first mode is valid, the following situations are
After the automatic stop function is

6
stop met at the same time
1. Engine cylinder head temperature > 149°F
2. Throttle < 1.5%
3. Speed < 3mph, status duration 3 seconds
4. System voltage > protection voltage of electric cell
Note: after the above four items are satisfied at the same
time, the automatic stop function is performed. During
this period, if the mode conversion function that triggers
the side stand stop mode or starts and stops the enable
switch has been activated, the automatic stop will
temporarily fail and the first mode needs to be
reactivated in order to be effective.
activated, the indicator light is
temporarily in a uniform flashing state
until the mode is switched.
3
Automatic
start
When the second mode works, the following conditions
are met:
1. Throttle opening > 2.5%, engine start automatically
After the automatic start function is
activated, the indicator light is temporarily
on until the mode is switched.
4
Side stand
switch
1. When the side stand switch is active, and the
state duration is more than 0.3 seconds into the side
stand protection stop mode.
After the side stand stop function is
activated, the indicator light
will temporarily go out until the
mode is switched.
5
Fault
indication
1. Over-current: solid
2.Over-voltage: one long and two short
3. Hall: one long and three short.
4. CAN communication: flashes abnormally
Over-current, SSCU will send out instructions
Over-voltage, SSCU will send out instructions
Hall anomaly, SSCU will issue stop instructions)
The display indicator will flash a
different light pattern indicating the
current fault type.
6
Under voltage
and power
loss
protection
1. When voltage is protected by the battery:
when the charging is abnormal, the automatic stop
function is temporarily interrupted, and when the battery
is charged to the allowable SOC, the automatic stop
function will be reactivated.
The instrument TOTAL area displays the
"BATT--" charging mark and continues to
flicker until the battery charging protection
state is switched.

9
Note:
After opening the seat, and you are done removing or
placing items inside, be sure to return the lock switch
knob to the "OFF" position to lock the seat. If the lock
switch is left in the "SEAT" position, others can also
open the seat, which could lead to the loss of
property or your seat.
Note:
To prevent theft, please lock the steering and remove the
key when you stop the vehicle. After locking, gently
turn the handlebars to confirm whether it is locked.
Please don't park in a place that hinders traffic.
Mechanical ignition switch
The ignition switch has the additional function of a
magnetic anti-theft device.
When you turn the lock switch of the
ignition switch to the "OPEN" position, you
can insert the key into the upper
keyhole; when the lock switch is turned to
the "SHUT" position, the upper keyhole
is closed, and the upper keyhole is
opened only
when the "key handle switch" is returned to the
"OPEN" position.
"ON" Mark: Turning the key to the "ON" marked position,
the power is turned on, the engine can be started, and the
key cannot be removed.
"OPEN" Mark: Turning the key to the "OPEN" marked
position, you can open the seat by pressing the right "SEAT"
identification button.
"OFF" Mark: The key turns to the "OFF" marking position,
the power is cut off, the engine cannot start, and the key
can be taken out
"LOCK" Mark: Turn the direction of the vehicle to the left,
press down the key to the "LOCK" marking position, take
out the key, and the front turn is locked. If you want to
open, insert the key and go to the "OFF" marking position,
the front steering lock is automatically unlocked.
Right handlebar switch
1.automatic start and stop switch
When the switch is in
this position, it indicates that
the automatic start and stop
function is enabled (on).
When the switch is in this position, it indicates that the
automatic start and stop function is disabled (off).

10
2. Hazard light switch
" "" Mark: When the light switch button is in the " "
marked position, the left and right turn signal lights flash
and blink at the same time, warning of danger.
" " Mark: When the hazard light switch button is in in
the " " marked position, the left and right steering
lights stop flashing.
3. electric starting switch
" " Mark: When holding the brake lever, press the
electric starting switch button, and the engine will start.
Note:
Once the engine starts, immediately release the
electric starting button, do not press the electric
starting button while the engine is running; do not
press the starting button for longer than 3 seconds at
a time, wait at least 10 seconds between button
presses, and do not attempt to start the unit if it will
not start after 5 attempts, so as to prevent excessive
battery discharge and use it only after eliminating any
possible faults.
4.front brake lever
Pull the front brake lever with your right hand slowly
as you brake. When the brake lever is pulled, the brake
light will be turned on automatically.
5.throttle
The throttle is used to control the speed of the
engine. When you want to speed up, you should turn the
throttle rearward, on the contrary, release the throttle
to achieve the purpose of deceleration.
Left handlebar switch
1.headlight high and low
beam switch
" "Mark: When the
headlight high and low
beam switch button is in the
" " marked position the
high beam light is lit, while the blue highlight indicator on
the dashboard is lit.
" " Mark: When the headlight high and low beam switch
button is in the " " marked position, the low beam light
is lit.

11
2.horn switch
When the ignition switch is in the " " position, press the
horn button and the horn will sound.
3. turn signal switch
Turn the switch to the " " position, the front left /
rear left turn signal flashes, turn the switch to the " "
position, and the front right / rear right turn signal flashes.
When the turn signal is switched on, the green turn signal
indicator on the dashboard flashes accordingly.
Turn off the turn signal by moving the switch back to
the middle position or pressing the middle button.
Warning:
Turn on the turn signal indicator ahead of when you
want to turn or change lanes. After turning, turn off the
turn signal in time so as not to affect the normal
operation of other vehicles and avoid accidents.
4.rear brake lever
When braking, pull the left brake lever with your left
hand slowly. When the brake handle is pulled, the brake
light will be turned on automatically.
USB interface
There is a (5V/2A) USB interface on
the left side of the inner leg shield
of the vehicle, which can be used to charge components
such as mobile phones.
Storage box
The storage box is located directly below the seat.
Press the "SEAT" button, the seat pad will be released, pull
up on the seat pad to gain access. Close the seat and
gently press the rear of the cushion to lock it. When a
helmet is placed inside, face the opening downward for a
proper fit.
Note:
The maximum carrying capacity of the storage box
shall not exceed 22lbs, and the load of the front leg
shield storage shall not exceed 3.3lbs.
After placing any objects inside, please make sure
that the cushion is actually locked.
Because the engine temperature is very high, low
heat resistant articles, such as food and flammable
items should not be placed inside.
Please do not place valuables in the storage box.
When washing the vehicle, water will be present, so pay
special attention to the important items in it.
Battery
(1) This model is equipped with a

12
maintenance-free battery, battery specification is 12V/8.6AH.
(2) The battery is installed below the foot board.
(3) To remove the battery: turn off the ignition switch,
unscrew the screws securing the battery box cover
with a screwdriver, remove the battery box cover,
remove the negative pole and positive pole installation
bolt from the battery, then remove the battery.
When installing the battery, please proceed in the
reverse order of removal.
Fault Mode and troubleshooting of the
automatic start and stop system
1. There is no response to the start button,
check the system as follows: the power supply abnormal
start button signal fails / the brake button signal fails side
stand to enable the relay to turn off SSCU abnormal.123
2 .The engine turns over but does not start,
check the system as follows: the power supply abnormal
trigger signal is abnormal, the fuel supply is
1 side stand enable: side stand switch in side stand down state, signal pull
down mode, may also be short circuited to ground
2 switch enable: the stop signal is in the stop state, the signal is pulled
down, and it may also be short-circuit grounding
3 SSCU exception: start and stop controller hardware exception or
software exception
abnormal, the ignition is abnormal, can be idle stepping
motor failure / SSCU abnormal ECU anomaly.
3. If the automatic start and stop function can not be
triggered, the investigation ideas are as follows: start and
stop enable switch abnormal temperature / speed
abnormal throttle position abnormal SSCU abnormal.
4. The starting function of the throttle is invalid, and the train
of thought is as follows: the position of the throttle is too
small and the relay is abnormal SSCU.
5. The stop and flameout function of the turpentine is invalid,
and the train of thought is as follows: the abnormal
communication speed is abnormal, the temperature is
abnormal, the position of the throttle is not returned to zero,
and the under voltage charging circuit of the battery is
abnormal / SSCU abnormal.4
6. The glittering mode of the fault lamp is as follows: Over
current: magnetic motor coil short circuit / SSCU
anomaly.
Over voltage: abnormal cylinder flywheel / SSCU anomaly.
Hall anomaly: Hall harness anomaly Hall sensor abnormal /
SSCU anomaly.
CAN communication exception: CAN signal abnormal CAN
bus abnormal SSCU abnormal ECU exception.
7. Under voltage protection: battery power loss
4
Battery under voltage: if the battery loses power below the set value of the
system, the automatic flameout function will be temporarily interrupted.

13
too cold charging fuse battery contact bad SSCU charging
connector is not reliable SSCU abnormal
8. Suddenly flameout while driving, at the same time the fault
lights flicker, check the train of thought as follows:
Over current: short circuit coil short circuit SSCU anomaly
Over voltage: abnormal SSCU charging
Hall anomaly: Hall harness anomaly Hall sensor abnormal
SSCU anomaly
Starting motorcycle
1. Check the fuel quantity and oil level before starting the
engine. The fuel quantity should meet the needs of the
expected mileage, and the oil level should be within the
upper and lower limits of the dipstick. If the oil quantity
is insufficient, please add it before you start the
engine.
2. Support the motorcycle with the center stand to lift
the rear wheel off the ground.
3. The power lock the master switch and go to the " "
position.
4. Pull the brake handle firmly and press the electric
starter button on the right handlebar switch to
start the motorcycle.
Warning:
Irregular operation of the engine starting procedure
may pose a danger. If the unit is not supported by the
center stand when starting the engine, turning the throttle
will cause the unit to suddenly take off. Use the center
stand when starting the engine, and only when idling, take
it off the stand. Therefore, before operation, do not rotate
the throttle, so as to avoid accidents or other risks.
Do not start the engine in poorly ventilated places.
Exhaust gas is toxic, the engine should be turned off when
indoors.
Note:
When you are not driving, please do not leave
the engine idling for a long period. Idling for too long
can overheat the engine and damage its internal parts.
Note:
1. Attention when starting: after applying the brake, press
the electric start switch slightly, the intelligent silent start
and stop system will automatically start, after starting it will
automatically switch to power generation mode; you do
not need to hold down the electric starting button for a
long time, the whole system will start automatically, for a
maximum of 3 seconds, if the system fails to start in 3
seconds, you can turn the power generation start switch
into starting mode again.

14
2. Maintenance note: if in the process of vehicle
maintenance, maintenance personnel are allowed to
operate the electric starting button for a long period of
time, each time up to 10 seconds, with a attempt interval
of more than 30 seconds between attempts.
3. Under voltage note: if the vehicle is parked for a long
period of time, or the battery is in poor condition, the side
stand automatic stop function is likely to be temporarily
interrupted. If the system detects the battery is under
voltage, the system will temporarily interrupt the automatic
stop function until the under voltage fault is corrected. If
the battery is very low on voltage, the vehicle cannot be
started, at the same time pay attention to note #4.
4. 4. Abnormal idle speed note: if the battery is very low on
voltage, the EFI system cannot perform the idle stepper
motor reset, at this time the stepper motor must be reset.
First ensure that the battery is charging to the normal
voltage, then turn off the key, wait 5 seconds, then attempt
to start again.
If you encounter other difficult problems during use that
cannot be solved, please contact after-sales service
personnel or professionals.
Setting Off
(1) Retract the center stand or side stand
Push the vehicle forward and the center stand support
will retract automatically.
If you use the side stand when stopped, lift the vehicle
vertically, then gently kick the side stand back to its original
position, step onto the vehicle from the left, and touch the
ground after sitting on the seat to prevent falling.
Use caution:
After starting the motorcycle, the brake should be
applied until you begin driving.
Warning:
Before driving your motorcycle, you must carefully
check the position of the side stand. If the side stand is not
in the retracted position, when making a left turn, it may
cause the side stand to hit the ground and cause the
motorcycle to lose its balance and cause an accident.
(2) Releasing the brake lever
Warning:
When the brake lever is released, do not quickly
rotate the throttle to avoid the danger of a sudden
increase in vehicle speed, resulting in the vehicle taking
off too quickly.

15
(3) Slowly rotate the throttle rearward, the motorcycle
will begin to move forward
Warning:
Throttle control grip should not be rotated
quickly to prevent the vehicle from suddenly taking off.
(4) Drive safely
Once the vehicle has started, check the function of the
turn signals, horn, adjust the view field of the rear view
mirrors, and confirm the vehicle is safe before driving.
(5) Speed adjustment is controlled by throttle control
Turn the throttle rearward to increase vehicle speed, rotation
should be slow and smooth. When riding or going uphill,
slowly turn the throttle to increase speed, and the power will
increase.
To slow down or stop, release the throttle, it will return to
closed automatically.
(6) Moderate driving can prolong the life of the engine
The first 1000mi of use is the break-in period of
the engine. Please keep it below 35 miles per hour and
avoid rapid acceleration. Follow the table below:
Mileage mi 0-185 185-300 300-685 685-930
Speed
mph
15-20 20-25 25-3030-40
The gearbox oil should be replaced while the engine
is hot after the break-in period.
(7) Use of front and rear braking
Please use the front and rear brakes at the same time
when the throttle is closed.
Braking should be "slow" at the beginning, and then
increased as needed, which is the ideal braking method.
Warning:
The speed of the vehicle is proportional to the
braking distance needed. Please be sure to estimate the
distance between the vehicle or object in front of you and
maintain a sufficient safe distance.
Inexperienced people often only use the rear brake,
the use of single-wheel braking can easily make the
vehicle unstable and slip, at the same time, it will
accelerate the wear and tear of the brake, use caution.

16
(8) Do not brake or turn aggressively
Emergency braking or sharp turning is the main cause of
slippage and crashes, which is very dangerous.
(9) Drive very carefully on rainy days & wet roads
Wet and slippery road surfaces on rainy days,
braking distances will be increased, slow down, at the same
time maintain enough safe distance from other vehicles, be
sure to allow appropriate braking distance.
Going downhill, return the throttle to the closed
position, and implement a moderate intermittent brake
application to slow down.
(10) Parking
When approaching a parking place
Turn on the turn signal beforehand, observe the
objects behind you in the mirror, pay attention to any
passing vehicles, and slow down. Close the throttle, use
front and rear brakes, brake lights will turn on to warn
those behind you.
When parked
Turn off the turn signal and turn the ignition switch to
the " " position.
Support the center stand on a flat surface, do not hinder
traffic, if the terrain is uneven, the vehicle can easily fall.
The left hand grasps the handlebar, the right hand
grabs the handrail next to the saddle, step on the center
stand lever, and pull the vehicle back with the right hand.
When the vehicle is stable, be sure to lock the steering and
remove the key in case of theft.
(11) Troubleshooting
If the engine does not start properly, please check the
following items:
A. Whether there is enough fuel in the fuel tank.
B. Carry out several starting attempts to check whether
the fuel flows to the injector.
C. If fuel flows to the injector, the ignition system should
be checked.
D. Remove the spark plug and touch it to the metal
crankcase of the engine and press the start button.
Check if there is spark at the spark plug, if no
spark, please bring your vehicle to an authorized dealer
for repair.