Qleen PURASTART Operation manual
1
QLEENQLEEN
QLEENQLEEN
QLEEN
QLEEN
QLEEN QLEEN
User Information
PURASTART
Variant 10 / 2016
QLEEN 2018
LEHMANN KG
KRANICHSTRASSE 2A
D-17235 NEUSTRELITZ
TEL +49 (0) 3981 48850
EMAIL [email protected]
WEB WWW.QLEEN.DE
2
User Information PURASTART
Thank you very much for buying a PURASTART Cleaning System manufactured by
Lehmann. Prior to starting the cleaning works, please, consider some important user
information. We kindly ask you to read them carefully and essentially observe them.
As owner of the PURASTART Cleaning System you have to obligatory make sure that
“User Information PURASTART”and observe the
safety and warning information.
We kindly ask you to also follow the General User and Safety Remarks (see separate
Lehmann publication “General User and Safety Information”).
This document is the original user information. It was issued in German language.
Copies provided in other languages are translations of this original user information.
Manufacturer / Editor
Karlhans Lehmann KG · Kranichstraße 2a · D-17235 Neustrelitz
Telephone (+49) 3981 48 850 · Fax (+49) 3981 44 06 20
E-Mail info@qleen.de · Internet www.qleen.de
Copyright
This document is protected by copyright.
Any copying, reproduction, translation or transfer into electronic media or machine
readable formats, of the document in whole or in part, is not permitted without prior
consent of the Lehmann KG. Technical changes reserved.
©Lehmann KG, Neustrelitz, 2016
Trademarks
The names QLEEN, PURAQLEEN, ROTAQLEEN, CARBONPOLE, TITANPOLE are registe-
red trademarks of the Lehmann KG, Neustrelitz.
Country ofOrigin
Federal Republic of Germany
3
1. 1. Structure and Content of this
User Information
1.2 Basic Safety Information
Obligations of the Operator
Proper Use
Improper Use
Security Measures
Working Safety Information
Requirements to the Workplace
See “General User and Safety Information” here (Publication of the Lehmann KG).
Structure Topic Page
Description of the PURASTART Information on the Product S. 4
Product Components S. 4
Connection and Operation Elements S. 4
Accessories S. 4
Description of proper handling Connection and Operation S. 5
Operation of the TDS Measuring Device S. 5
Disassembly S. 5
Replacing the Granulate Bottle S. 6
Proper Use S. 6
Improper Use S. 6
Technical Customer Service S. 6
Storage S. 6
Maintenance S. 6
Replacing saturated granulate S. 6
Cleaning Device and Accessories S. 6
Repairing S. 6
Defect System - Safety Information S. 7
Repair Works S. 7
Recycling, Disposal S. 7
Product Date S. 7
Supply Connection S. 7
Environmental and Climate Conditions S. 7
Underlying Standards S. 8
Additional Information Guarantee Information S. 8
Addresses S. 8
CE Conformity S. 9
4
2. Description of the PURASTART
2.1 Product image/overview
2.2 Product Components
Main Parts
• Chassis (stabile plastic case)
• Granulate bottle with 25 l mix-bed resin
• Bottle head with carrying handle and TDS Measuring Device
• Hose holder
•
Connection and operation elements
1. Water inlet with Gardena connection
2. Pure water outlet with Gardena connection
3. TDS Measuring Device
4.
5. Plug nipple for brush
2.3 Accessories
case of interest, we are pleased to send you the latest overview. Please, just send us
your request via info@qleen.de or tel. (+49) 03981488 50.
QLEEN
System variant
PUR ASTART
4
2 1
4
3
5
5
2.4 Connection and Operation
2.5 Operation of the TDS Measuring Device
-
ring method usually applied for QLEEN products)
about 25 ppm. Higher values may apply for facades and other surfaces.
cover and replace the two coin cells (LR44/AG13/357). Close the lid and screw it
again.
2.6 Disassembly
off.
CAUTION
6
2.7 Exchange the Granulate Bottle
▷ Make sure that there is no pressure inside the bottle (see disassembly)
2.8 Proper Use
The system must only be used properly and in technically faultless status. See » Ge-
neral User and Safety Information « (Publication of the Lehmann KG ).
2.9 Improper Use
The system user/operator is solely liable for any damages resulting from improper
use. See » General User and Safety Information « (Publication of the Lehmann KG).
2.10 Technical Customer Service
In case the error continues to occur, we kindly ask you to contact your QLEEN autho-
rized dealer, where you bought the system. System users and operators must not carry
out any own repair works at Lehmann Cleaning systems.
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage“ (separate publication of the Lehmann KG).
2.11 Storage (System and Accessories)
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage, Disposal“ (separate publication of the Lehmann KG).
2.12 Maintenance
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage, Disposal“ (separate publication of the Lehmann KG).
2.13 Replacing saturated granulate
We kindly ask you to consider the information of the „User information Mix-bed
resin systems“ (separate publication of the Lehmann KG) for granulate exchange.
2.14 Cleaning Device andAccessories
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage, Disposal“ (separate publication of the Lehmann KG).
2.15 Repair works
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage, Disposal“ (separate publication of the Lehmann KG.
7
2.16 Defect systems - Safety Remarks
Defect systems must be immediately
• Decommissioned
• Disassembled
• Removed
• Repaired
2.17 Repair works
Repair works must be exclusively carried out by authorized QLEEN dealers. For any
repair works, please, contact the technical customer service of your authorized
QLEEN dealer where you bought the system.
2.18 Recycling, Disposal (System, Accessories, Packaging,
Mix-bed resin)
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage, Disposal“ (separate publication of the Lehmann KG).
2.19 Product data
2.20 Supply connections
• Water supply to the system via the water pipe,
• Flexible single hose (25 m) for supplying the cleaning head with water, pure
water orcleaning solution
• Water supply: Gardena Coupling
2.21 Environmental and Climate Conditions
• Permissible temperature range for system use: +5 °C to +50°C
• Maximum permissible wind speed: < 3,4 m/sec (wind speed 2) for works with
the pole set
• Maximum permissible surface temperature of surfaces to be cleaned: < 50 °C
Component Measured parameter Remarks Values
Device Dimensions Length / Width / Height 38 x 38 x 110 cm
Weight 38 kg
Water supply Pressure min. / max. 0 / 5 bar
Temperature min. / max. 5° / 50°C
Granulate 25 l
Productivity Depends on the water supply quality 1.150-11.500 l pure water
Pole set Work height max. 15 m
Work place Work and movement area Length / Width, minimum 2 x 2 m
Ground bearing capacity min. / max. 250 kg/m
Safety distance from power pylon/lines mind. 40 m
8
2.22 Underlying Standards
EN 13923
2.23 CEConformity
The product on hand was extensively tested before being launched on the market
and meets the legal requirements. Also see our annex “Conformity Declaration”
(page 9) here.
3. Additional information
3.1 Warranty information
-
ordinary 24-months guarantee to our customers from the European Union member
states, which shall be understood notwithstanding the legal warranty claims and
does not limit these.
3.2 Adresses
Manufacturer:
Karlhans Lehmann KG, Kranichstraße 2a, D 17235 Neustrelitz
Hotline: Tel. +49 (0)3981 488 50; Fax + 49 (0)3981 440 620
E-Mail: [email protected]
9
10
QLEENQLEEN
QLEENQLEEN
QLEEN
QLEEN
QLEEN QLEEN
QLEEN 2016
LEHMANN KG
KRANICHSTRASSE 2A
D-17235 NEUSTRELITZ
TEL +49 (0) 3981 48850
EMAIL [email protected]
WEB WWW.QLEEN.DE
Table of contents
