Qlight QMCL60 User manual

1
Multiple Color LED Steady Signal Light
QMCL
QMCL60 QMCL80 QMCL100 QMCL125
• Protection rating : IP65
• Ambient operating temperature : -30°C to +50°C
• Buzzer layer current
Model
number Voltage Current
Certicate Weight Color
QMCL60
DC12V 0.120A 0.12kg
7Color
DC24V 0.060A
QMCL80
DC12V 0.120A 0.17kg
DC24V 0.060A
QMCL100
DC12V 0.240A 0.24kg
DC24V 0.120A
QMCL125
DC12V 0.240A 0.31kg
DC24V 0.120A
Model number Voltage AC/DC12V AC/DC24V
QMCL60
QMCL80
Signal line current 0.120A 0.060A
Buzzer layer current 0.020A 0.020A
QMCL100
QMCL125
Signal line current 0.240A 0.120A
Buzzer layer current 0.020A 0.020A
QMCL80 - BZ - 24
[Model number] [Buzzer] [Voltage]
| | |
•
QMCL60
•
QMCL80
•
QMCL100
•
QMCL125
• (Blank)
- No buzzer type
• BZ
- Built-in buzzer type
•
12 -DC12V
•
24 -DC24V
65
5030
80d B
Please scan the QR code for more detailed product information.
www.qlight.com
Ordering Specications Product Specications
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o󰘯 the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s speci󰘰cation.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, 󰘰re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. During wiring or maintenance, please completely turn o󰘯 the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a 󰘰re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to 󰘰re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to 󰘰re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, 󰘰re, electric shock and loss of life.)

2
• QMCL Series can be wired with either external contact or transistor.
• When using a transistor, please choose between the NPN transistor or PNP transistor which best matches the voltage and product type,
then connect them correctly according to the wiring diagram below.
• DC type cable specication : External power/ signal line standard - UL1007 AWG22(0.3sq) 400mm
• DC type products can be wired regardless of polarity.
• Wiring Conguration for Signal Color
Ø9 CABLE ENTRY
360°/ 3-M4 BOLT
PCD38 Ø9 CABLE ENTRY
360°/ 3-M4 BOLT
PCD50 Ø9 CABLE ENTRY
360°/ 3-M5 BOLT
PCD85
Ø9 CABLE ENTRY
360°/ 3-M4 BOLT
PCD60
QMCL60 QMCL80 QMCL100 QMCL125
Ø69 Ø83
29 51
14 80
25 60
14 85
Ø97
29 66
14 95
Ø116
33 77
14 110
Red
Green
Blue
Brown
Black
1(Red)
2(Green)
1(Blue)
Buzzer
External Contact
Power
Fuse
Red
Green
Blue
Brown
Black
1(Red)
2(Green)
1(Blue)
Buzzer
EXTERNAL TRANSISTOR-NPN
Power
Fuse
Steady
Red
Green
Blue
Brown
Black
1(Red)
2(Green)
1(Blue)
Buzzer
EXTERNAL TRANSISTOR-PNP
PowerFuse
Steady
No. Signal color Wiring conguration
1RED 1(RED)
2GREEN 2(GREEN)
3BLUE 3(BLUE)
4AMBER 1(RED)+2(GREEN)
5CYAN 2(GREEN)+3(BLUE)
6PURPLE 1(RED)+3(BLUE)
7WHITE 1(RED)+2(GREEN)+3(BLUE)
Dimensions
(Units : mm)
Wiring Instructions

3
Parts Denition and Installation Mounting Hole Specications
• First, remove the ange nuts from bolts and place
the product through the mounting surface holes.
• Fasten the ange nuts on the opposite side of the
mounting surface until the product is tightened
securely.
Lens(PC)
LED unit
Housing(ABS)
Flange nut
• Machine holes on the mounting surface referring to the diagram
below.
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP65.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP65), it may cause malfunction or damage to the product.
• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-down
positions where water can potentially penetrate into the product and impact it’s operation.
• For further information, please visit our website (http://www.qlight.com).
QMCL60 QMCL80
QMCL100 QMCL125
3-Ø5 HOLES
Ø9 HOLES
PCD 60
3-Ø6 HOLES
Ø9 HOLES
PCD 85
3-Ø5 HOLES
Ø9 HOLES
PCD 38
3-Ø5 HOLES
Ø9 HOLES
PCD 50

Dimensions
QMCL60
TWS45 TWA45
QMCL80
TWS80 TWA80
QMCL100
QMCL125
SWP125 SWM125
Mounting Accessories (Sold Separately)
4
70
94
69
11.5 26.5
117
PCD60~70
70
90
65
115
11.5 26.5
PCD50
PCD85
PCD60~70
13
50
84
50
20
44
86
12
35
60
40
20
4-Ø5 HOLES
Ø12
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
36
66
25
66
PCD40
50
84
50
36
PCD40~50
35
60
40
12
36
66
10
6
PCD30~40
PCD30~40
4-Ø5 HOLES
360°/3-
Ø5 HOLES
4-Ø5 HOLES
360°/3-
Ø5 HOLES
PCD40~50
4-Ø5 HOLES
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
Ø12
Ø22
6-Ø5.5 HOLES
4-Ø5.5 HOLES
360°/3-
Ø5 HOLES
Ø10 CABLE ENTRY
Ø22
6-Ø5.5 HOLES
4-Ø5.5 HOLES
360°/3-
Ø5 HOLES
Ø10 CABLE ENTRY
PCD50
PCD85
70
94
69
11.5 26.5
117
PCD60~70
70
90
65
115
11.5 26.5
PCD50
PCD85
PCD60~70
13
50
84
50
20
44
86
12
35
60
40
20
4-Ø5 HOLES
Ø12
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
36
66
25
66
PCD40
50
84
50
36
PCD40~50
35
60
40
12
36
66
10
6
PCD30~40
PCD30~40
4-Ø5 HOLES
360°/3-
Ø5 HOLES
4-Ø5 HOLES
360°/3-
Ø5 HOLES
PCD40~50
4-Ø5 HOLES
360°/3-
Ø5 HOLES
Ø12 CABLE ENTRY
Ø12
Ø22
6-Ø5.5 HOLES
4-Ø5.5 HOLES
360°/3-
Ø5 HOLES
Ø10 CABLE ENTRY
Ø22
6-Ø5.5 HOLES
4-Ø5.5 HOLES
360°/3-
Ø5 HOLES
Ø10 CABLE ENTRY
PCD50
PCD85
• Please refer to the dimensions below for installation of mounting brackets.
Product Operation Inquiry / Customer Support [phone]
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : A-412, 579 Kyungin-Ro, Guro-Gu, Seoul, Korea (Postal Code : 08212)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805) www.qlight.com
EN-1806A