Qlink Achille 150 User manual

Thank you for your selection of this QLINK scooter. It represents high technology and reliability, the emission
of this vehicle has reached the latest national emission standard, therefore it is a really environment-friendly
motorcycle that may satisfy the demands of modern society. It has been manufactured technically in accordance
with a lot of experience that our company obtained in manufacturing sports, race and tourist etc.vehicles. And
it is just these experiences that have made this motorcycle take a large percent in the like products. This User's Manual
will help you get to know the operating method of this model of motorcycle, and obtain the knowledge relating
to operation, basic check-up, service and maintenance etc. Please contact your dealer or appointed maintenance
station when you have problems in useing and maintenance.
All configurations and parameters are for reference only, not contracted ones. Please refer to the actual
configuration of the manufacturer.
INTRODUCTION
USER'S MANUAL

THE FOLLOWING INFORMATION APPEARS AS SIGNS IN THIS USER'S MANUAL
This sign indicates procedures must be followed to avoid injury of yourself, other people or the motorcycle.
This sign indicates procedures must be followed to avoid damage to the motorcycle and yourself.
This sign indicates procedures with further information.
This User's Manual should be considered as part of the scooter and should be kept with the scooter for use in case of emergency.
Even if this motorcycle is resold, it should also be kept with it. Our company is endeavoring to improve product design and
quality all the time. Therefore, when this User's Manual was being printed, it had already included the latest product information.
As a result, it may not be exactly the same as the motorcycle you purchased. For any questions, please contact the dealer from
whom the motorcycle was originally purchased or contact the appointed maintenance station.
Be sure that you have read this User's Manual prior to riding the motorcycle
Warning
Notice
Note
Note
USER'S MANUAL

MAIN POINTS FOR SAFE RIDING
NAMES OF PARTS OF THE MOTORCYCLE
MOTORCYCLE IDENTIFICATION
FUNCTIONS OF THE CONTROLLERS
Main switch
Indicator
Speedometer
Oil capacity indication meter
Handlebar switch
Rear brake lever
Front brake lever
steering lock
Fuel tank cap
Starting lever
Trunk
Rearview mirror
Kickstand
Check sidestand switch holding function
CHECK BEFORE RIDING
Front and rear brakes
Check of brake fluid leakage
1
2
3
3
3
4
4
4
4
5
5
6
6
6
6
7
7
7
8
9
9
CONTENTS
Throttle grip
Engine oil
Air filter
Tires
Tubeless tire and cast rim
Check if each component has been tightened
Lamps and signal lamps
Switches
Gasoline
MAIN POINT FOR USING AND RIDING
Engine starting and pre-warming
Starting of the motorcycle
Acceleration
Braking
Engine running-in
Parking
REGULAR MAINTENANCE
Driver's tool
Regular Maintenance /Lubrication Form
Torque specifications
Engine oil
9
10
10
10
11
12
12
12
12
13
13
13
14
14
14
15
15
16
16
17
18
USER'S MANUAL

USE OF ENGINE OIL
MAINTENANCE RECORDS
SCHEMATIC CIRCUIT DIAGRAM
31
32
33
SPECIFICATIONS
CONTENTS
Replacement of gear oil
Air filter
Maintenance for the air filter
Adjustment of carburetor
Adjustment of idling speed
Adjustment of the throttle handle
Adjustment of valve clearance
Inspection of spark plug
Free travel of front brake
Adjustment of rear brake
Front brake
Rear brake
Inspection of brake fluid amount
Replacement of brake fluid
Checking and lubricating the wire cable
Lubrication of throttle valve wire cable and grip
Lubrication of brake handlebar
Lubrication main stand and sidestand
Check of front fork
Check of steering stem
Wheel bearing
19
20
20
20
21
21
22
22
23
23
23
23
24
25
25
25
25
25
26
26
26
Battery
Replacement of strip fuse
Headlamp
Cleaning and maintenance
26
27
28
28
29
USER'S MANUAL

Please give clear signals in case of the situations listed below :
Turning left turning right
It's very dangerous to brake on a damp road. Please avoid any emergency brake to prevent slip of the
motorcycle.
When parking on a damp road, put on the brake slowly.
Slow down your motorcycle when approaching street corners or crossroads and accelerate only when having
passed the turn .
Take cautions in riding while passing by side of a parked vehicle. Because the vehicle driver may not notice
your passing and open the door suddenly.
Rails, iron plates paved at a construction site or manhole covers are especially slippery when they are wet,
please take care and lower your driving speed while passing these installations. And in the meantime, keep the
motorcycle vertical, or otherwise it may slip.
Cleaning the motorcycle will wet the brake shoe and lower the brake performance, check if the brake is in
good state before riding.
While driving the motorcycle, you must wear safety helmet, gloves, preventive trousers (please fasten any
ruffle part and part around the ankle of the trousers so that the trousers will not flap) as well as clothes with
bright color.
Do not load too many things on the motorcycle, or it will affect the stability of the motorcycle. Please refer
to section " Tire ". Things should be fixed at the luggage carrier with rope. Loose load will also affect the
stability of the motorcycle, as well as distract your attention on road situation.
Each time before riding your motorcycle, you need to check the performance related items, including: brake,
steering, tire pressure, fuel, engine lubricating oil and rearview mirror, etc.
MAIN POINTS FOR SAFE RIDING
USER'S MANUAL
1