Qoobex Q phone 2019 User manual

USER GUIDE
Q Phone 2019_A
USER GUIDE
Q Phone 2019_A
Q
phone
Q
phone

2Qphone 2019_A - Manual
Thank you for choosing our mobile
native 3-D phone, the Q phone.
This User’s Guide is intended to guide
you through the functions and features of
your new Q phone.
PLEASE READ THE following
INSTRUTIONS FIRST
• Before using the Q phone, please
read all safety precautions and
User’s Guide carefully to ensure
safe and proper use.
• The descriptions in this manual are
based on the default settings of the

3
Qphone 2019_A - Manual
mobile Q phone.
• The images and screenshots
used in User’s Guide may be
different from the actual product
appearance.
• The information contained in User’s
Guide may differ from the product
or may differ from the software
provided by the service provider.
Subject to change without notice.
• Available features and additional
services may vary depending on Q
phone, software version, or service
providers.
• The format and information in
this User’s Guide is based on the
AndroidTM operating system and
may differ from the actual operating
system used by the user.
• The applications and their
functionality may vary depending
on country, region, or hardware
specication. Performance issues
caused by third-party applications
are not within the scope of

4Qphone 2019_A - Manual
Qoobex’s responsibility.
• Performance problems or
incompatibilities caused by
user’s editing the settings are
not within the scope of Qoobex’s
responsibility.
• Additional charges may incur for
sending and receiving messages,
uploading and downloading,
automatic synchronization, or
using the location service. To avoid
additional costs, please choose the
appropriate data charging scheme.
For more information, contact your
service provider.
• Please carefully keep this manual
for future reference.
Icons List
Before you start to use the Q phone,
familiarize yourself with the icons in this
User’s Guide:
Warning
— occasions that may hurt the user or
others

5
Qphone 2019_A - Manual
Caution
— occasions that may cause damage
to the Q phone or other equipment.
Note
— comments, tips, or other information.
INSTallation
Accessories Introduction
Check if the following items are present
in the product box:
• Q Phone, 5.99’’ native 3-D VR, 4G
LTE cellphone
• Charger
• USB cable
• Earbuds
• Card pin
Use only approved software. Illegal
software may cause damage or
malfunction to your Q phone, which are
not within the scope of the warranty
provided by Qoobex.
The items provided with your Q phone

6Qphone 2019_A - Manual
may vary depending on the software and
accessories available in your area or
provided by your service provider.
• Other accessories may be
purchased from your local dealer.
• Qoobex certied accessories
provide the best support for the Q
phones.
• Accessories other than those
certied by Qoobex may be
incompatible with your Q phone.
Installation of SIM and SD
cards
1. If the Q phone is on, press and
hold the Startup & Shutdown
button, then select Shut Down →
OK to turn off the Q phone.
2. Use the card pin to insert the hole
at 90° to eject the card holder.
3. Insert the SIM card, and/or SD card
into the SIM card holder. Smoothly
push the card into this card holder
according to the direction indicated
by the lost corner of the card.

7
Qphone 2019_A - Manual
CAUTION: Use a regular card
provided by the service provider.
The cut cards damage the card
slot.
Use only the charger and USB
cable of this Q phone. Otherwise,
it may cause the battery to explode
or damage your Q phone.
When the battery power is low,
the Q phone will give out a
warning sound and display low
battery message. If the battery
power is too low, the Q phone will
automatically shut down. You need
to recharge the battery before you
can continue to use the Q phone.
Charge of Q phone
1. Insert the small end of the plug of
the travel charger into the multi-
function jack.
CAUTION: Improperly connected
travel charger may cause serious
damage to the Q phone. No
warranty will be given for any

8Qphone 2019_A - Manual
damage caused by incorrect
operation.
2. Plug the large end of the plug of
the Travel Charger into a standard
power outlet.
CAUTION: The Q phone can be
used while charging, but this will
extend the time it takes for the
battery to get fully charged.
When the Q phone is being
charged, the touch screen may fail
due to power instability.
The mobile Q phone will heat up
when charging. This is normal
and does not affect the mobile Q
phone’s service life or performance.
3. When the battery is fully charged
(the battery icon is no longer
showing charging), disconnect the
charger from Q phone, and then
unplug it from the power outlet.
CAUTION: To save battery power,
unplug the Charger when you don’t
use your Q phone. The charger
does not have a power switch,

9
Qphone 2019_A - Manual
and you must unplug the travel
charger from the outlet also to stop
consuming electicity. When used,
the charger should be kept in close
contact with the socket.
Charge with computer USB cable
Before charging, make sure the
computer is turned on.
1. Plug one end of the computer’s
USB cable (mini-USB) into the
multi-function jack.
2. Connect the other end of the
computer’s USB cable to the USB
port on your computer. Depending
on the type of USB cable used,
it may take a moment to start
charging.
3. When the battery is fully charged
(the battery icon is no longer
showing charging), disconnect the
USB cable from the Q phone, and
then unplug it from the computer.

10 Qphone 2019_A - Manual
Reduce battery loss
If auto-sync, Bluetooth, or WIFI are
activated in the background, the battery
will drain faster. To save battery power,
turn off unnecessary applications. You
can also reduce the backlight time and the
brightness of the display screen, or switch
it to standby mode with the screen black,
by pressing the Startup & Shutdown
button briey when the Q phone is not in
use.
SPECIFICATIONS
Q phone 2019
3-D Technology
5.99’’ Native HD 3-D display
technology
Native 3-D picture & video / IPS
/ FHD 2160*1080 / 16 M
Best range of 3-D visibility: 30
cm - 5 m
Processor Eight core processor MediaTek
MT6757
Main Processor
Technology
2.8+1.6 GHz / A53 / 16 nm FFC