
3
Add Pet Food to the Tray
1. Open the LOCK (F) , remove LID (A) and SLIDE COVER (B).
2. Add food to the FEEDER TRAY (D) compartments 1-6.
DO NOT OVERFILL.Each compartment holds up to 1 cup
of food, if it’s too full, the feeder may jam or become
damaged.
3. Replace the SLIDE COVER (B) and the LID (A).
4. Attach the LOCK (F).
5. Make Sure the SLIDE COVER (B) locks into the position
with the LID (A).
NOTE: If you want only 1 feeding, fill TRAY 1, if you want 2 feedings, fill TRAY 1& 2; if
you want 3 feedings, fill TRAY 1, 2 and 3, and so on…
Cleaning and Care
•When the food tray gets dirty, you can disassemble the LID, SLIDE COVER and
FOOD TRAY, and remove them from the FEEDER BASE.
•Clean the LID, SLIDE COVER and FOOD TRAY in warm soapy water.
•Wash by hand only. Dishwasher may damage the parts.
•Replace batteries when the Low Battery Indicator blinks.
•Tips on training your pets. Some pets may require an adjustment period to get
used to their feeder. These things can help.
•Place the feeder next to your pet’s existing bowl or feeder.
•Place food in the tray.
•Keep food in the old bowl or feeder.
•After an adjustment time, when you notice your pet eating from the new
feeder, quietly remove the old one.