Qpets Qpets SP 101 User manual

Qpets Remote Training System
User Manual
Model: SP 101
Please read this guide before using
Strap Length: 12 inches---20 inches

Thank you for choosing Qpets. Our mission is to make happy pet owners by providing
quality pet products, the latest tools and techniques to successfully train your pet. If you
have any questions or comments, please contact the our Customer Support Center at 1-
909-923-8743 or visit our website at www.lavasat.com
Table of Contents
Components……………………………………………………………............2
Quick Start Guide………………..……………………………….……2
Step-1 Prepare the Remote Transmitter……………2
Step-2 Pair transmitter with the collar receiver…3
Step-3 Install the electrodes for the receiver….…3
Step-4 Adjust the collar to fit your pet………………3
How to check the static shock function…………………..…4
How to use the transmitter ………………………………..….…4
How to change the battery………………………………………..4
How to re-set/re-pair receiver with transmitter………4
Important Tips…………………………………………………………..5
Customer Support Center………………………………………….6
1

Thank you for choosing Qpets. Our mission is to make happy pet owners by providing
quality pet products, the latest tools and techniques to successfully train your pet. If you
have any questions or comments, please contact the our Customer Support Center at 1-
909-923-8743 or visit our website at www.lavasat.com
Table of Contents
Components……………………………………………………………............2
Quick Start Guide………………..……………………………….……2
Step-1 Prepare the Remote Transmitter……………2
Step-2 Pair transmitter with the collar receiver…3
Step-3 Install the electrodes for the receiver….…3
Step-4 Adjust the collar to fit your pet………………3
How to check the static shock function…………………..…4
How to use the transmitter ………………………………..….…4
How to change the battery………………………………………..4
How to re-set/re-pair receiver with transmitter………4
Important Tips…………………………………………………………..5
Customer Support Center………………………………………….6
1

Customer Support Center
Tel: [phone]
Monday –Friday 8:30AM –5:00 PM Pacific Time
Email:[email protected]
Add: LAVA Electronics Inc. 2580 E Philadelphia ST #D, Ontario, CA 91761
This product has a limited Manufacturer Warranty. Details of the warranty can be found
on www.lavasat.com or by calling our Customer Support Center.
Made in China
6

3. Use a paper clip to double click the tiny button which inside of the re-set hole on
the Receiver, you can see it after you take the battery cover out from receiver.
The LED indicated light which on the Receiver will start blinking.
4. Hold the Vibartion Button(located in the middle of transmitter) until the receiver
start vibrating. The Red LED indicated ligth will stay on after pair the Receiver
successfully with transmitter.
Important Tips:
(Please Read)
1. The valid distance of remote control means the straight-line distance between
the transmitter and the receiver without obstacles in between. If there are
interference signals or signal screening around, the actual remote control
distance may vary.
2. The lifetime of the batteries vary according as how often you use the product.
Your first battery may not last as long as you expectation.
3. This product is for pet training. Good effect can only be achieved after a period
of training.
4. This product is a wireless transmitting device; you MUST NOT use the remote
control system in places like petrol stations or hospitals where mobile phones
are prohibited. Patients using heart pacemaker are forbidden to use this
product.
5. The Electrodes have to directly touch pet’s skin as it is very important to
effective training.
6. This product is only for Pet Training, It is not a Regular Pet Collar. Please
remove it from your pet at least 8 hours out of every 24 hours.
7. The Device does not design only for water resistant, not fully waterproof.
8. If you do not use the transmitter or Receiver, please take the battery out for
saving battery life.
5