QSmart Online QShooter QS-100 User manual

Shooter
Model
QS-100
01
Installation Guide

Installation Diagram
QShooter
QShooter x1
Pellet Container x1
Pellet Tube x1
Holder x1
LED Window x1
Mini USB Port x1
(Connected with QEye by
Connection Cable)
5
5
6
6
1
12
23
3
4
4
01

List of Parts
02
Item Pictures Description
QShooter
Attach QShooter to The Tank
Max. Tank Thickness: 1 inch (25.4 mm)
Remote Control IR Remote Control Feeding
Power Adapter Universal Power Supply
Power Adapter Connect QEye with Power
Cable 6.5 ft (200 cm) Adapter
Connection
Cable 1.64 ft (50 cm)
Holder
Auto Feeder to Shoot Pellets
(Max. Pellet Size : 2.0 mm)
Connect QEye with QShooter

Installation (1~4)
1. Attach the holder to
QShooter by sliding
2. Hang QShooter on the tank
3. Open the lid and pour
the pellets
4. Please align the dot
between QShooter and the
lid when closing
03
QShooter MUST have the lid
rmly sealed to prevent air
pressure from escaping (this
may cause no shooting).
!
!

5. Connect power adapter and
enjoy feeding by remote control
Installation (5) / Specications
04
QShooter
1.Power Input : 100-240 VAC 50/60 Hz
2.Power Output (USB) : 5 V 2 A
3.Power Consumption : 5 W (Max.)
4.QShooter Size : 3.07 x 3.7 x 3.31 inches/
78 x 94 x 84 mm
(Width x Height x Depth)
5.Max. Tank Thickness : 1 inch (25.4 mm)
6.Max. Pellet Size : 2.0 mm
QShooter LED Indicator
•LED On : Power On
•LED Flashing Slowly :
Food Empty
•LED Flashing Quickly :
Over Shooting (Feeding)

Power
Pellet Number
Shooting Power
(Small)
Shooting Power
(Middle)
Decreasing Mode
Clean the Pellet
Tube Load the Pellets
Increasing Mode
Shooting Power
(Large)
＊Notice : Please make sure power is “ on “ before using
Remote Control
05

Notice
06
1. Keep QShooter dry and avoid any contact with water to
prevent any malfunction.
2. Please add pellets in mounted QShooter directly without
moving QShooter and keep QShooter horizontal.
3. Do NOT move QShooter with pellets in it. Please tip pellets
out by tipping them from the opposite side of QShooter
nozzle as the picture below indicates. Do NOT turn QShooter
upside down with pellets in it. Failure to observe these points
could cause pellets to move into solenoid valve and block it.
Correct Wrong
Correct
(Horizontal)
Wrong
(Non-horizontal)

More Informaiton
For Instructions
qsmartonline.com