Qtum HD1049 User manual

HD1049 – Installation and User manual
HD1049
HD-SDI Digital Video Recorder

2
HD1049 installation and user manual
This page is intentionally left blank

3
HD1049 installation and user manual
CE Information
The product must be installed according to the currently valid installation regulations
for EMC to guarantee the designed use and to prevent EMC problems.
The device supplied with this manual is according to the EC, EMC Directive,
89/336/EEC & LVD 73/23/EEC
Standard used for showing compliance with the essential requirements of the device:
EN 55022
EN 61000-3-2
EN 61000-3-3
EN 50130-4
EN 55024
LVD: EN60950-1
Safety Precautions
Caution Before Use
Please read this manual before installing or using the DVR.
Please keep this manual in a safe place, to allow for future reference
For the safety and proper use, The DVR is marked with various symbols. Please read
these to prevent injury of financial loss.
Installation Site
Ensure installation position is level, secure and adequately ventilated.
Avoid installing close to sources of humidity or water.

4
HD1049 installation and user manual
This page is intentionally left blank

5
HD1049 installation and user manual
Contents
OVERVIEW ................................................................................................................ 7
1. CONTENTS OF PACKING.......................................................................................................7
2. FEATURES ..........................................................................................................................8
INSTALLATION.......................................................................................................... 9
1. FRONT PANEL.....................................................................................................................9
2. REAR PANEL CONNECTIONS..............................................................................................10
3. REMOTE CONTROL ...........................................................................................................11
4. CONNECTION GUIDE .........................................................................................................12
5. TURNING ON THE DVR ......................................................................................................14
OPERATION ............................................................................................................ 15
1. NAVIGATION ......................................................................................................................15
1-1. Mouse Control ........................................................................................................................................ 15
1-2. Menu Navigation .................................................................................................................................... 15
2. MONITORING.....................................................................................................................16
2-1. OSD Description..................................................................................................................................... 16
2-2. Select Channel ....................................................................................................................................... 16
2-3. Using Digital Zoom ................................................................................................................................. 17
3. PLAYBACK........................................................................................................................18
3-1. OSD Description..................................................................................................................................... 18
3-2. Playback Control .................................................................................................................................... 18
4. PTZ CONTROL..................................................................................................................20
4-1. PTZ Control by mouse............................................................................................................................ 20
4-2. PTZ Control by remote keyboard ........................................................................................................... 22
4-3. PTZ Control by remote controller ........................................................................................................... 22
4-4. PTZ Control by Client software............................................................................................................... 22
SETUP MENU .......................................................................................................... 23
1. DISPLAY ...........................................................................................................................25
1-1. Camera Covert ....................................................................................................................................... 25
1-2. Camera Name ........................................................................................................................................ 25
1-3. OSD Setting ........................................................................................................................................... 26
1-4. Live Setting............................................................................................................................................. 27
1-5. Camera Status........................................................................................................................................ 27
2. RECORDING......................................................................................................................28
2-1. Global ..................................................................................................................................................... 28
2-2. Frame ..................................................................................................................................................... 29
2-3. Event ...................................................................................................................................................... 30
2-4. Action...................................................................................................................................................... 31
2-5. Schedule ................................................................................................................................................ 32
2-6. Holiday ................................................................................................................................................... 32
2-7. Time ....................................................................................................................................................... 33
2-8. Duration.................................................................................................................................................. 34
3. SYSTEM............................................................................................................................35
3-1. Basic....................................................................................................................................................... 35
3-2. Disk ........................................................................................................................................................ 37
3-3. Account................................................................................................................................................... 38
3-4. Program Update ..................................................................................................................................... 39
3-5. Sensor .................................................................................................................................................... 40
3-6. PTZ Setup .............................................................................................................................................. 40
3-7. PTZ Controller ........................................................................................................................................ 41
3-8. Etc. ......................................................................................................................................................... 41

6
HD1049 installation and user manual
4. NETWORK.........................................................................................................................42
4-1. DDNS ..................................................................................................................................................... 42
4-2. IP SET .................................................................................................................................................... 42
4-3. NTP ........................................................................................................................................................ 43
4-4. LIVE........................................................................................................................................................ 43
4-5. BANDWIDTH.......................................................................................................................................... 43
5. EVENT ..............................................................................................................................44
5-1. E-Mail Registration ................................................................................................................................. 44
5-2. SMTP Mode............................................................................................................................................ 44
5-3. E-mail Out .............................................................................................................................................. 45
5-4. Beep Out ................................................................................................................................................ 45
5-5. Alarm Out ............................................................................................................................................... 45
SEARCHING RECORDED DATA ............................................................................ 46
1. SEARCH ...........................................................................................................................47
1-1. Date/Time Search................................................................................................................................... 47
1-2. Event Search.......................................................................................................................................... 47
1-3. Calendar Search..................................................................................................................................... 48
1-4. Bookmark Search................................................................................................................................... 49
2. ARCHIVING EVIDENCE TO DVD/CD OR USB ......................................................................50
3. LOG .................................................................................................................................52
CLIENT VIEWER SOFTWARE ................................................................................ 53
1. LIVE MONITORING .............................................................................................................56
2. REMOTE SEARCH..............................................................................................................59
2-1. Search .................................................................................................................................................... 59
2-2. Archive.................................................................................................................................................... 61
2-3. Remote Log............................................................................................................................................ 64
3. REMOTE SETUP:(MENU SETTINGS -SAME AS DVR) ..........................................................65
1. Display....................................................................................................................................................... 65
2. Recording .................................................................................................................................................. 67
3. System....................................................................................................................................................... 70
4. Network ..................................................................................................................................................... 72
5. Event ......................................................................................................................................................... 72
4. LOCAL SEARCH (VIEWING DOWNLOADED FOOTAGE) ..........................................................74
1. Search ....................................................................................................................................................... 74
2. Log............................................................................................................................................................. 76
3. Info............................................................................................................................................................. 76
5. LOCAL SETUP...................................................................................................................77
1. Global ........................................................................................................................................................ 77
2. Opacity ...................................................................................................................................................... 77
3. Audio Buffer ............................................................................................................................................... 78
6. PAN, TILT, ZOOM,FOCUS (REMOTE TELEMETRY CONTROL)...............................................79
1. PAN/TILT/ZOOM/FOCUS .......................................................................................................................... 79
2. PRESET/LEARN ....................................................................................................................................... 80
7. FIRMWARE UPGRADE........................................................................................................81
APPENDIX ............................................................................................................... 82
1. ALARM SENSOR INSTALLATION .........................................................................................82
2. DYNAMIC IP (SUPPORTING DDNS SERVER).......................................................................85
3. SETUP FOR DVR PORT/WEB SERVER PORT USING IP SHARING ROUTER (PORT
FORWARDING) ......................................................................................................................87
4. SPECIFICATION .................................................................................................................88

7
HD1049 installation and user manual
Overview
1. Contents of packing
Mouse
Power Cable
User Manual Remote Controller Battery
Installation
CD

8
HD1049 installation and user manual
2. Features
●Convenience
- User-friendly GUI (Graphical User Interface)
- Easy-to-use menu structure
- Easy-to-use recorded data search (Time, Date, Motion, and Alarm)
- Easy-to control via Front Panel, IR remote control and USB 2.0 mouse.
●Stability
- Auto restart after power interruption
-DB structure offers data stabilisation and better storage utilisation
●Expandability
- Max. 3 HDDs can be installed
- Remote DVRs can be controlled by the supplied client software
●Technology
- HD-SDI video input standard SMPTE 292M applied (1080p/720p Multi Signal Input)
- Full HD Recording(1080p) and Playback
- Max. 95fps recording with 1080p
- Adjustable resolution (1080p, 720p) and frame rate per channel
- Uses watermarking & scrambling technologies
- Support multi stream for Recording , Network and Mobile view simultaneously
●Functionality
- Variable recording function (normal, alarm, motion, schedule, duration, Time Lapse)
- RS485 Telemetry
- Full channel real-time monitoring
- Multi channel playback
- Variable events notification to e-mail, buzzer or PC Client system
- Built-in CD/DVD Writer, USB 2.0 for various data backup
- HD Digital Out (HDMI)

9
HD1049 installation and user manual
①②③④⑤⑧
⑥ ⑦
⑭
⑩⑫⑪
⑬
⑮⑨
Installation
1. Front Panel
①Power
System Power On/Off
②Reverse Play / Rewind
Reverse play of recorded data. When in play mode press again to enter fast rewind mode.
③Pause
To freeze picture on playback mode and live mode.
④Forward Play
Playback of the recorded data. When in play mode press again to enter fast forward mode.
⑤Stop
To stop playback and go back to live mode.
⑥Menu
Displays the menu on the screen
⑦Search
Entering search mode
⑧Select
Menu selection
⑨-⑫ Arrow Buttons
Moves the cursor while in menu mode
⑬REC Indicator
Recording status. When recording is on, the light will be illuminated.
⑭Network Indicator
Network status. When network is connected, the light will flash.
⑮USB Ports
USB connector for mouse control & downloading to USB memory.

10
HD1049 installation and user manual
2. Rear Panel Connections
①USB 2.0
USB 2.0 connector for mouse control
②VGA VIDEO OUT
VGA Video Output
③HDMI OUT
HDMI Video Output
④Network Port
Connecting to the DVR through Internet or LAN
⑤RS232 Port
Serial Communication for A/S
⑥AUDIO OUT
Audio output
⑦VIDEO & AUDIO IN
4 Camera inputs (HD-SDI Video and Audio In)
⑧KEYBOARD CONTROLLER
Serial Communication for P/T/Z Control Keyboard
⑨PTZ CAMERA CONTROLLER
Serial Communication for Pan / Tilt Camera
⑩ ALARM OUT
4 Alarm output ports
⑪SENSOR IN
4 Sensor input ports
① ② ③ ④ ⑤ ⑥ ⑦ ⑧⑨ ⑩ ⑪

11
HD1049 installation and user manual
3. Remote Control
①②③
④
⑤
⑥
⑧
⑨
⑦
⑪
①POWER : Power on/off
②P/T/Z : Entering PTZ Setup menu directly
③REC : Start & Stop Recording
④Numbers and letters (1 to 9)
⑤INFO : Direct access system infomation
ID : Entering remocon ID set mode
MUTE : Audio Mute
AUDIO : Switches through Audio channels
⑥MENU: Entering system menu
SEARCH: Entering search
ARROW : Left, Right, Up and Down
SEL : Select/Enter
⑦VOL +/- : Up, down volume
⑧CH +/- : Up, down channel
⑨(◀)◀: Reverse play
▶(▶) : Play (or fast forward)
I I : Pause
■:Stop playback
⑩OSD : On Screen Display ON/OFF
SEQ : Sequence operation
LOG : Direct access Log list
⑪CAM : Changing PTZ icon
P/T : Pan &Tilt
Z/F : Zoom/ & Focus
DIS : Channel Division

12
HD1049 installation and user manual
4. Connection Guide
Connecting the monitor
There are four available monitor outputs on DVR.
●HDMI output : Connect to the HDMI port of the monitor.
●VGA output : Connect to the VGA port of the monitor.
Connecting cameras
This unit comes with 4 HD-SDI inputs.
●HD-SDI input : Connect to the HD-SDI out of the camera.
HD-SDI
Camera
VGA
Monito
r
HDMI
Monito
r
Speaker
System
PC
(
Client
)
Keyboard
Mouse PTZ
Controller Siren Sensor

13
HD1049 installation and user manual
Connecting audio
To record audio on the DVR, connect to the audio source.
●Audio input : Connect to the audio out of the microphone.
To listen to live or recorded audio, connect to an amplified speaker system.
●Audio output : Connect to the audio in of the audio AMP.
Connecting to a network
Use the network port to connect to remote PC via ethernet network.
Connecting to a sensor input
There are 4 individual alarm inputs marked as Sensor In.
●Sensor inputs : Connect to (+) terminal of a sensor.
●Common GND : Connect to (–) terminals of sensors.
Connecting to a alarm output
The DVR can activate external devices such as buzzers or lights using the relay.
There are 4 relay outputs marked as Alarm out.
●Alarm outputs (A1~A4) : Connect to (+) terminal of buzzer or light.
●Alarm outputs (B1~B4) : Connect to (–) terminals of buzzer or light.
Connecting to a PTZ camera
This RS485 connector can be used to control Pan / Tilt / Zoom camera.
Common
GND
Sensor
In
p
uts
(+) (-)
Alarm
Out
p
uts

14
HD1049 installation and user manual
●Telemetry (+) : Connect to RS485 Rx(+) of PTZ camera.
●Telemetry (-) : Connect to RS485 Rx(-) of PTZ camera.
Connecting to a remote keyboard
This RS485 connector is for a control keyboard.
●Keyboard (+) : Connect to RS485 Tx(+) of the keyboard.
●Keyboard (-) : Connect to RS485 Tx(-) of the keyboard.
Connecting to a mouse
●USB 2.0 : Connect to the mouse.
5. Turning on the DVR
1. Connect the power cable.
2. Connect camera cables.
3. Connect a network cable and a monitor cable.
4. Press the POWER button on the front panel and wait until the main screen is displayed on
the connected monitor; this process may take a couple of minutes.
(+)
(-)

15
HD1049 installation and user manual
Operation
1. Navigation
You can navigate the on screen menus using the front panel buttons, remote controller or
mouse.
1-1. Mouse Control
Right clicking the mouse brings up the following popup menu.
①Setup Menu
②Search Menu
③PAN/Tilt Menu
④Focus/Zoom Menu
⑤Power Button
⑥Instant Record Button
⑦Playback Button
⑧Eject Button
⑨Volume U/Down
⑩Multiscreen Display
⑪ Channel Up/Down Button
1-2. Menu Navigation
To enter the Setup menu, the user has to have the required access rights and be logged on.
Press the Menu button or right click with mouse on screen and select the menu icon.
The following screen will be displayed asking for password.
①Select the user ID.
②Enter the password.
The default password is 00000000(8 zeros).
③Press OK, the setup menu will be displayed
on screen.
All menus are navigated around using the Left/
Right/ Up/ Down and the Select button or mouse.
To step back out of the menus, press MENU button
orclicktherightbuttonofthemouse.
①
②
③
① ②
⑥
⑨
⑪
⑨
④
⑪
⑦
③
⑤
⑧
⑩

16
HD1049 installation and user manual
2. Monitoring
2-1. OSD Description
The Status Bar on screen shows HDD capacity, network connection, current time, etc.
①HDD capacity : Used capacity / Total capacity
②Mouse connection
③USB connection : It is shown that the USB device like a memory stick is connected.
④Network connection : It is shown that admin or user is connected.
⑤Backup : It is shown while the file is copied.
⑥Current Date & Time
2-2. Select Channel
Use the Multiscreen display button on the pop-up menu to select the display mode.
Single Channel 4 Channel
Also you can use the DIS button on the remote controller to change the display mode.
Display switches in the following order when the DIS button is pressed.
Single Channel 4 Channel Single Channel 4 Channel
① ② ③ ⑥
④⑤

17
HD1049 installation and user manual
2-3. Using Digital Zoom
The zoom feature will allow you to zoom in and out on your screen making it significantly
easier to view the image.
①Left-click and drag the mouse to set the desired area for zoom in live or playback mode.
②Click the left button on the mouse.
The screen will be changed to the zoomed image and the small picture will be displayed
in the upper-right-hand corner of the screen.
The blue box on the small picture indicates the position of the magnified image.
③You can change the magnification of image and move the position of the magnified
image.
Turn the mouse wheel to enlarge or reduce the image.
Drag the image to move the position of the magnified image.
④Click the right button on the mouse to return to the original mage.
Blue box

18
HD1049 installation and user manual
3. Playback
Click the right button on the mouse, the popup menu will be displayed on screen.
To begin playback, press the Play button on the popup menu.
3-1. OSD Description
The Control Bar on screen shows Playback control buttons, Display mode buttons, Playback
time, etc.
①Display mode button (1CH) ⑦Playback display
②Display mode button (4CH) ⑧Mouse connection
③Stopbutton ⑨USB connection
④Pausebutton ⑩Network connection
⑤Reverse Play/ Fast Backward button ⑪Backup
⑥Forward Play/ Fast Forward button ⑫Playback Date & Time
3-2. Playback Control
Play Forward
When the Forward Play button(⑥) is pressed, the unit will play forward at the rate the data
was recorded. While in the play mode, the user may change the playback direction, playback
speed. To return to play forward operations, press the Forward Play button(⑥).
Reverse Play
To begin reverse playback, press the Reverse Play button(⑤).
Pause
During playback, press the Pause button(④). This feature pauses all full screen and
multiscreen images. When this button is pressed in the pause mode, the unit will play.
①
⑦
② ③ ④ ⑤ ⑥
⑧ ⑨ ⑩ ⑪ ⑫

19
HD1049 installation and user manual
Single Frame Advance
During the pause mode, press the Forward Play button(⑥) to view the frame directly after the
frame displayed on screen.
Single Frame Rewind
During the pause mode, press the Reverse Play button(⑤) to view the frame directly before
the frame displayed on screen.
Fast Forward
In playback mode, press the Fast Forward button(⑥) to switch between various fast play
modes such as x2, x4, x8, x16, x32 play.
Fast Backward
In reverse playback mode, press the Fast Backward button(⑤) to switch between various
reverse play modes such as x2, x4, x8, x16, x32 reverse play.
Stop
To stop playback and return to the live mode, press the Stop button(③).

20
HD1049 installation and user manual
4. PTZ Control
The user can control PTZ cameras via RS485 communication.
The PTZ domes can be wired in a Daisy chain.
Daisy Chain configuration
The telemetry function of DVR can be controlled via 4 different methods:
1. Mouse
2. Remote keyboard
3. Remote controller
4. Software viewer
4-1. PTZ Control by mouse
1. Click the right button the mouse, the popup menu will appear.
2. To control Pan/Tilt, click the PTZ/TILT icon(①).
To control Zoom/Focus, click the ZOOM icon(②).
3. The PTZ menu will be displayed on screen.
The user can control PTZ cameras using PTZ menu.
①②
①⑥
②
⑦ ⑧
⑨
④ ⑤
③