Qtum KDVR 1041 User manual

INSTALLATION/OPERATION
DIGITAL VIDEO RECORDER
(MPEG4 - 4/8/16 CHANNEL)
KD16-0205E

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
WARNING: To prevent a risk of fire of electric shock, do not expose this product to rain or moisture.
• This installation should be made by a qualified service person and should conform to all local codes.
• This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Copyright This manual is the intellectual property of Manufacturer and is
protected by copyright. All rights are reserved. No part of this
document may be reproduced or transmitted for any purpose,
by whatever means, be they electronic or mechanical, without
the express written permission of Manufacturer.
Edition : Dec.2005
Copyright 200ⓒ5 Manufacturer
Note This Manual was compiled with the greatest of care and all information
double checked. At the time of printing the description was complete and
correct. Because of the further development of products, the content of the
manual might change without prior notice. Manufacturer will not be liable
for damage which is directly or indirectly due to errors, incompleteness, or
discrepancies the manual and the product described.
Trade marks All names used in this manual for hardware and software are very probably
registered trade marks and must be treated as such.
2/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
Contents
FOR THE SAFETY OF CUSTOMERS…………………...………………………….…………………………4
DESCRIPTION OF PARTS AND FUNCTION…………...…………………………………………………....7
COMPOSITION OF UNIT…………………………………...……………………………………………………7
FEATURES …………………………………………………..……………………………….……………….....8
DESCRIPTION OF PARTS AND FUNCTION ………………..…………….…………..……..……………….. 9
Front Panel……………………………………………………..………………………………..…………........9
Rear Panel………………………………………………………..………………………………………… …11
Connection diagram………………………………………………………………………………………….13
OSD Description.................................................................................................................................................15
MENU………………………………………………………………...………………………………………......16
MENU TREE…………………………………………………………..…………………………………………16
Main Menu.…………………………………………………………..………………………………………..18
Display………………………………………………………………..………………………………………..18
Recording……………..………..……………………………………..………………………………………..19
System Set……………………………………………………………..……………………………………….29
Network Set………………………………………………………………..…………….……………………..33
Evnt Notification……………………………….…………………………..……………………………….….34
Search………………………………………….……………………………………………………….………35
Date / Time Search……………………………….…………………………………………………….………35
Calendar Search……….……………………………………………………………………………….………35
BackUp……….……….……………………….……………………………………………………….………37
Client Program…………………………………………………………………………………........................41
Q & A……………….………………………………………………………………………………….…………59
Appendix 1…...……………………………………………………………………….........…………………….61
Appendix 2...………………………………………………………………………….........…………………….63
Appendix 3…...........………………………………………………………………….........…………………….66
Appendix 4…...........………………………………………………………………….........…………………….70
Appendix 5…...........………………………………………………………………….........…………………….76
Appendix 6…...........………………………………………………………………….........…………………….78
Appendix 7 (Specification)…………………...………………………………...................…………………….85
3/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
1. FOR THE SAFETY OF CUSTOMERS
Caution before use
Please read this manual for proper use.
The cautionsdescribed in this manual contain very important information for the safe use, so, please
follow the instructions.
Please keep manual within reach for reference.
For safety and proper use, please read manual to prevent your physical or financial loss.
Tips for installation
Avoid liquid which could cause fire or electric shock.
Clean the plug and socket.
Keep the socket and plug clean to avoid fire. The plug should be tightly
connected to the wall socket.
Do not place the unit on an unstable surface.
Do not place unit on an unstable surface or sloped surface.
Be careful of installation position.
Do not place the device in humid, direct sunlight, dusty, hot, or greasy condition.
4/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
Caution for proper usage
During use
In following cases, please turn off the power and remove the plug then, contact technical
support.
No picture being displayed.
If smoke comes out of the device or when you smell something burning.
If any substance is spilled into the device.
If the device is dropped or the case is damaged.
If the power cable has been damaged.
Do not open case or modify.
There are two high voltage sections inside the unit. Any modification could cause
fire or electric shock.
Do not place any liquid or small material on the device.
Liquid or small debris spilled into the device could cause fire or electric shock.
Do not allow any debris to pass through the fan..
Do not touch during an electrical storm .
During an electrical storm, do not touch the plug or cable. It could cause electric shock.
Don’t touch the power plug with wet hands.
It could cause a electric shock.
5/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
Use the designated HDD
Please use the designated HDD. Otherwise, recorder may operate improperly.
Maker HDD Capacity
Western Digital
or Seagate
80GB, 160GB, 250GB, 320GB, 400GB
Do not pull cable to disconnect from wall socket.
It could damage the cable and cause fire.
Please pull out holding the plug.
When moving the devise, please remove plug.
If you move the device while the plug is in the socket, it could cause a fire by damaging the cable.
Do not block ventilation.
When ventilation is blocked, it could cause fire by the generation of internal heat.
Do not place heavy itemson the device.
Keep the device clean.
Internal cleaning, please contact your Installer.
If there is too much dust inside the device, it could cause afire or internal short.
Caution:
If the DVR is not to be used for an extended period of time, please switch off and unplug.
6/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
2
2.
.
D
DE
ES
SC
CR
RI
IP
PT
TI
IO
ON
N
O
OF
F
P
PA
AR
RT
TS
S
A
AN
ND
D
F
FU
UN
NC
CT
TI
IO
ON
N
2-1 COMPOSITION OF UNIT
Standard
7/85
Please read this manual before using
Digital Video Recorder System
Power
User
DVR
RemoteController Battery
※Accessories are subject to change without notice.

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
2-2 FEATURES
● Convenience
- User-friendly UI( Text Based User Interface)
- Easy-to-use menu composition
- Easy-to-use recorded data search (Time, Date, Motion, Alarm)
●Stability
- Auto restart after power interruption
-DB structure offers data stabilization and best storage utilization
●Expandability
-Various remote multi DVR’s can be controlled by Web browser (PC Client System)
●Technology
-Embedded LINUX OS
-Total maximum recording rate 120 fps
-High-resolution & high-quality MPEG-4 algorithm
-Using Water marking & scrambling technologies,
-Strong protection recorded data
-MPEG-4 : 2~ 8Kbytes per image with resolution 360x240
●Functionality
- Variable recording function (normal, alarm, motion, schedule)
- Full channel real-time monitoring
- Live monitoring, recording, playback, backup, remote access at the same time
- Multi channel playback
- Variable events notification to e-mail, buzzer or PC Client system
8/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
2-3 DESCRIPTION OF PARTS AND FUNCTION
2-3-1 Front Panel
(1) LED
- REC : Recording status (When recording is on, the red light is blinking)
- PWR : System Power On/Off (When power is on, the green light is lit up)
(2) USB 2.0 PORT
- USB2.0 connector
(3) POWER BUTTON
- System Power On/Off
(4) NUMERIC & CHARACTER
- Input for numeric & character
(5) MENU
- Displays menu on the screen
(6) SEARCH
- Enter search mode directly
9/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
(7) PLAY▶(▶)
(8) REWIND (◀)W
(9) ▌▌)
on playback mode and live mode.
0) STOP / EJECT ( █)
back to live mode.
1) REC (●)
2) VOL (▲▼)
3) AUDIO (8/16CH Only)
4) ARROW KEY
5) SELECT
n
- Playback the recorded data.
- Push two times to fast forward
- Playback inreverse
PAUSE (
- To freeze picture
(1
-
To stop playback and go
-
To eject CD-RW
(1
- S
tarts & stops manual recording of relevant camera in a full screen live mode.
(1
- Increase or decrease volume.
(1
- To select audio channel
(1
- Cursor shifting on the menu.
- Shows divided screen
(1
- Menu selectio
10/85


MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
(08) RS422 / 485
- 1 Serial Communication port for Pan / Tilt Camera
(09) Alarm/Sensor
- Alarm / 4 Sensor input / 1 output port
(10) AC Power
- AC 110~240 V (Free Voltage)
ATTENTION
When the video format is changed, the system should be re-booted
The video format should be selected before booting
Default Passwords
“00000000” i.e. 8x Zero’s. Password is required if you need to shut down-power or stop recording, prompt
will be displayed asking for password.
Web Client
User ID “admin” (not case sensitive). Admin ID cannot be changed this is full administrator ID.
Password “00000000” i.e. 8x Zero’s
12/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
2-3-3 System Connection Diagram
13/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
2-3-4. Remote Controller
1.Power :
2. Rec : Start & Stop Recording
3.ⓞ~⑨:Key for figure and character
4. PTZ: Controlling PTZ camera
5. OSD : Operating OSD ON/OFF
6. SEQ : Key for SEQ operation
7. LOG : Direct access Log list
8. INFO: Direct access system Info.
9. ID : Reserved.
10. MUTE : Audio Mute
11. AUDIO : Available audio switching
when user select this key
12. MENU : Entering system menu
13. SEARCH : Entering search
14. ARROW & SPLIT : Key moving
left, right, up and down. Also, Screen
split display shows
15. VOL”+,-“ : Up, down volume
16. CH “+,-“ : Up, down channel(s)
17. ▶▶ : Play(or fast forward)
18. ◀: Reverse play
19 II : Pause
20. █: Stop playback
14/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
2-3-5. OSD Description
:
Recordin
g
on
Shows “Alarm recording
mode / Motion recording
mode/ Power loss”/ Video
Loss”.
NORMAL: Showsthe recording Mode.
* 16/8channel doesn’t show recording icon as 4channel.
If the user programmed “schedule recording” and current
time is out of range, “STANDBY” will be shown when the
“Rec” button is pushed
HD :34%, This shows how much as a percentage is
occupied on the Hard Disk Drive
12-31-2004 12:00:00 : It shows the system date & time
15/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
16/85
3
3.
.
M
ME
EN
NU
U-
-
3-1.Menutree
Dis
p
la
y
Set
Recordin
g
Set
S
y
stem Set
Monitor Adjustment (4CH Only)
Recording Quality
Camera Covert
Camera Name
OSD On/Off
Event Clear
Frame Rate
Setup Motion
(post motion/area/sensitivity)
P. Alarm Duration
Global Parameter
Normal Recording
Alarm Recording
Motion Recording
Schedule Recording
Audio
Basic
Disk Format
Password Change
Client Account
Program Update
Repeat Recording
Setup Schedule
Watermark
Date Format
Initialization
Date/Time
Language
Recording Priority
Sensor
Information
Add New Account
Delete Account
P.T.Z Save and exit
Record Resolution
Save and exit
Main Menu

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
Network Set Use Dynamic IP-No
Use Dynamic IP-Yes
IP address
Gate Way
Net Mask
DNS Server
DVR Port
Web Server Port
Save and Exit
XDSL User ID
XDSL Password
DDNS User ID
DDNS Password
Save and Exit
Date/Time Search
Calendar Search
Backu
p
Search
E-Mail Registration
E-Mail Report
Notification Out
Event Notification
Alarm Out
Beep
E-Mail
F.F. : Exclusive / AVI
B.D. : CD/DVD-WR /
Flash
Log
17/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
3-2 Main Menu
The following menu will appear on OSD when you press the menu button.
MAIN MENU
▶DISPLAY SET
RECORDING SET
SYSTEM SET
NETWORK SET
EVENT NOTIFICATION
Use UP() or DOWN() on the front panel to move to next menu. To move to the submenu,
press the “SELECT” button.
Display Set
DISPLAY SET
▶MONITOR ADJUSTMENT (4CH Only)
CAMERA COVERT
CAMERA NAME
OSD ON/OFF
SET DISPLAY SEQUENCE(8/16CH Only)
EVENT CLEAR
Monitor Adjustment- (4CH Only)
Controls the vertical and horizontal position of live picture,With the background screen shown, use
Left( ◀), Right(▶), Up(▲), Down(▼) button for setting the location.
Camera Covert
Allows hidden cameras on live screen, selected cameras will appear as a blue screen.
In the record mode, all cameras are being recorded.
18/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
Camera Name
Camera title can be written on the screen.
OSD On/Off
OSD on/ off : Select the OSD display is on/off
Set Display Sequence
SET DISPLAY SEQUENCE
▶FULL DISPLAY SEQUENCE
QUAD DISPLAY SEQUENCE
START FULL DISPLAY SEQUENCE
START QUAD DISPLAY SEQUENCE
Sequence dwell time can be selected between 5,10,15,30,45,60 sec. When you select “ Start Full or
Quad Display Sequence”, monitor switch will be started(Or, user can select “ SEQ” button on the
remote control)
Event Clear
Is for erasing OSD characters related with events.
Recording Set
All recorded data can be saved in the format of watermark or scrambling when user
selects“watermark :On”,After downloading the saved data,user can confirm if data
has been changed by someone using our PC software.
RECORDING SET
▶GLOBAL PARAMETER
NORMAL RECORDING
ALARM RECORDING
MOTION RECORDING
SCHEDULE RECORDING
RECORDING PRIORITY
19/85

MPEG4-4/8/16Channel - Installation/ O
p
eration Manual
Global Parameter
All the setup values for Audio/ Repeat/ Watermark / Resolution will be applied globally to all channels.
Normal Recording
Executes continuous recording according to the designated set-up value.
Alarm recording
Executes recording when sensor is tripped.
Motion recording
Executes recording when motion is captured.
Schedule recording
Executes recording as per the programmed time table.
Recording priority
Specifies the priority between four priorities.
NOTE
“Instant playback” ( direct playback via ▶, not search mode) is available . The file is created on the
unit of 500Mbyte
Recording Parameter
..
RECORDING PARAMETER
▶AUDIO : ON/OFF
REPEAT RECORDING : ON/ OFF
WATERMARK : ON /OFF
RECORDING RESOLUTION
SAVE AND EXIT
20/85
This manual suits for next models
2
Table of contents
Other Qtum DVR manuals
Popular DVR manuals by other brands

Wren
Wren DRS6000 SERIES Product information

GANA I & C Co
GANA I & C Co GN-716J user manual

Safety Basement
Safety Basement SB-MSDVR660 instruction manual

Dedicated Micros
Dedicated Micros SD Excel installation manual

Avermedia
Avermedia AVerDiGi MOB1304 NET user manual

March Networks
March Networks 8000 Series installation guide