Qtx HIPAR-126 User manual

www.avsl.com 154.325UK User Manual
HIPAR-126
Outdoor LED PAR Can RGBWA-UV
Item ref: 154.325UK
User Manual
Thank you for choosing the HIPAR-126, a high-power LED PAR can fitted with 9pcs of 10W super bright 6-
in-1 COB LEDs, built into an IP65 weatherproof housing for outdoor or indoor applications. Can be
operated standalone from the internal auto programs or via DMX512 controller is more precise control is
required. Pre-wired with waterproof power and DMX signal leads for easy connection and daisy-chaining.
Supplied with split bracket which can also be used as a floor stand. Ideal solution for parties and events
where background colour wash or U/V illumination is required.
In the box:
Your HIPAR-126 should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.

www.avsl.com 154.325UK User Manual
Installation:
•The HIPAR-126 is supplied with a dual hanging bracket, which can also be used as a free-standing
support.
•When installing the fixture, ensure all fixings are secure, controls and connections are accessible and
allow enough space for air to circulate around the housing. Do not aim directly in line of sight or very
close to people where the extremely bright output of the fixture may be harmful to eyesight.
•The HIPAR-126 is IP65 weatherproof, and all electrical connections are hard-wired with waterproof
connectors. An XLR to waterproof connector is provided for adapting the DMX input lead to a
standard DMX signal input. A mains plug to waterproof connector is provided to adapt the power
input lead to a standard mains supply.
•Connect the waterproof connectors securely, ensuring that the notches are aligned for correct
polarity.
•The waterproof plugs have a threaded collar which must be fully tightened onto the waterproof
socket.
•The HIPAR-126 also has DMX through and power through leads for connecting onto further HIPAR
cans in a daisy-chain manner. Ensure that the mains power supply is capable of the total load of all
cans connected.
Cleaning:
•Use a soft cloth with a neutral detergent to clean the casing and lens as required
•Do not use strong solvents for cleaning the unit
Rear panel controls:
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN”buttons to navigate through various setting functions.
Press “ENTER”button to save the desired setting.

www.avsl.com 154.325UK User Manual
Menu
Number range
Function and description
A001
A001-A512
10CH DMX512 address setting
d001
d001-d512
6CH DMX512 address setting
CJ01
CJ01-CJ16
Colour jump (speed slow to fast)
CF01
CF01-CF16
Colour fade (speed slow to fast)
CC00
CC00-CC16
Colour pulse (speed slow to fast)
SoUD
Sound to light colour change
CL01
CL01-CL32
Manual colour mix selection
r000
r000-r255
Red dimming (0-100%)
G000
G000-G255
Green dimming (0-100%)
b000
b000-b255
Blue dimming (0-100%)
u000
u000-u255
White dimming (0-100%)
P000
P000-P255
Amber dimming (0-100%)
o000
o000-o255
UV dimming (0-100%)
DMX mode:
The HIPAR-126 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input
on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the “UP”and “DOWN”buttons and “ENTER”to confirm.
This unit has 6 or 10 DMX channels as indicated in the tables below:
10 Channel mode (A001-A512)
Channel
Value
Function
CH1
0-255
Master dimming (0-100%)
CH2
0-255
Red dimming (0-100%)
CH3
0-255
Green dimming (0-100%)
CH4
0-255
Blue dimming (0-100%)
CH5
0-255
White dimming (0-100%)
CH6
0-255
Amber dimming (0-100%)
CH7
0-255
UV dimming (0-100%)
CH8
0-255
Strobe effect (slow to fast)
CH9
0-49
No effect
50-99
Colour jump
100-149
Colour fade
150-199
Colour pulse
200-255
Sound to light colour change
CH10
0-255
Macro speed (slow to fast)
6 Channel mode (d001-d512)
Channel
Value
Function
CH1
0-255
Red dimming (0-100%)
CH2
0-255
Green dimming (0-100%)
CH3
0-255
Blue dimming (0-100%)
CH4
0-255
White dimming (0-100%)
CH5
0-255
Amber dimming (0-100%)
CH6
0-255
UV dimming (0-100%)

www.avsl.com 154.325UK User Manual
Specifications:
Power supply
100-240Vac, 50/60Hz (IEC)
Power consumption
120W
LED quantity
9x 10W RGBWA-UV
DMX channels
6/10CH
Beam angle
25°
IP rating
IP65
Modes
Manual, Auto, sound-activated, master/slave, DMX512
Connections
Power in, power out, DMX in, DMX out
Dimensions
240 x 240 x 150mm
Weight
4.8kg
Troubleshooting:
No power (mains)
Check mains voltage is correct, and outlet is switched on
Check IEC leads are properly connected
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
Check that unit is in DMX mode and ensure DMX address remains lit to
confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/
cutting out
Ensure adequate ventilation and unit is not too close to a heat source
IP65
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at
the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.