QUAD QLH-WCH-1800 User manual

INSTALLATION INSTRUCTIONS
45°
1. 2. 3.
Tighten
(1Nm)
PUCK INSTALLATION
2212-372
WIRELESS CHARGING MODULE
Wireless Charging Module
and Cable from Quad Lock
CABLE INSTALLATION
+ve
-ve
12V
✓✗
Tighten
(0.2Nm)
2. HUB MOTOR
Quad Lock
Module
12V Accessory
port
EXAMPLE WIRING CONFIGURATIONS
1. MID DRIVE MOTOR
Quad Lock
Module
12V Accessory
port
3. CONNECT AT STEM
Quad Lock
Module
12V Power
+ve
-ve
12V
✓✗
+ve
-ve
12V
✓
✗
+ve
-ve
12V
✓✗
+ve
-ve
12V
✓✗
+ve
-ve
12V
✓✗
+ve
-ve
12V
✓✗
+ve
-ve
12V
✓✗
From regulated accessory
power supply with suitable
overcurrent protection
Power and cabling from
e-bike drive system
(varies per manufacturer)
NOTE: This product must be professionally installed by an authorised assembly plant or service centre.
Any installation by un-authorised parties will void the product warranty.
Follow neccessary
precautions to avoid
electrical shock

2212-372
TECHNICAL SPECIFICATIONS
SKU QLH-WCH-1800 QLH-WCH-1000
Model QL-5289 QL-5290
Model Name OEM Wireless Charger 12V 1.8A Input OEM Wireless Charger 12V 1.0A Input
Input Voltage 12V DC 12V DC
Input Current 1.8A Max @12V 1.0A Max @12V
Input Connection 2-wire - GND, +12V 2-wire - GND, +12V
Output Power 5W / 7.5W / 10W / 15W 5W / 7.5W
Operating Temperature -10°C to +40°C at RH ≤95%
Operating frequency 105Khz~205Khz.
Eciency Up to 75%-80% at maximum load (15W output) @ +23°C ambient
Standby Current 40mA
Phone Charging Apple : Up to 7.5W Fast Charging
Samsung : Up to 10W Fast Charging
Google : Up to 15W Fast Charging
Huawei : Up to 15W Fast Charging
Apple : Up to 7.5W Fast Charging
Samsung : Up to 7.5W Fast Charging
Google : Up to 7.5W Fast Charging
Huawei : Up to 7.5W Fast Charging
Electronics Protection Reverse polarity protection
Overvoltage/Undervoltage protection
Overcurrent protection
Transient spike protection
Overtemperature protection – 2-stage
Foreign Object Protection (FOD) – detects presence of metal objects in proximity
above charger and limits power output from coil to prevent overheating
Certification
Water resistance IP67
Dimensions
Product Weight (kg) 0.080 kg
TROUBLESHOOTING
1. Is the Drive System OK?
2. Is the Power on?
3. Is the Battery charged?
4. Check 12V power at Connector
5. Replace Cable
6. Replace Charging Module
Follow neccessary
precautions to avoid
electrical shock
Check drive
system
manual and
resolve any
issues
52.0
52.0
26.0
38.0
Right-Angle Cable Vertical Cable

2212-372
APPLE
iPhone 14 Pro
iPhone 14 Pro Max
iPhone 14
iPhone 14 Plus
iPhone 13 Pro
iPhone 13 Pro Max
iPhone 13
iPhone 13 mini
iPhone SE (3rd Gen)
iPhone 12 Pro
iPhone 12 Pro Max
iPhone 12
iPhone 12 mini
iPhone 11 Pro
iPhone 11 Pro Max
iPhone 11
iPhone SE (2nd Gen)
iPhone XS
iPhone XS Max
iPhone XR
iPhone X
iPhone 8
iPhone 8 Plus
SAMSUNG
Galaxy S23
Galaxy S23+
Galaxy S23 Ultra
Galaxy S22
Galaxy S22+
Galaxy S22 Ultra
Galaxy S21 FE
Galaxy S21
Galaxy S21+
Galaxy S21 Ultra
Galaxy Note20
Galaxy Note20 Ultra
Galaxy S20 FE
Galaxy S20
Galaxy S20+
Galaxy S20 Ultra
Galaxy Note10
Galaxy Note10+
Galaxy Note9
Galaxy S10
Galaxy S10+
Galaxy S10e
Galaxy S9
Galaxy S9+
Galaxy S8
Galaxy S8+
GOOGLE
Pixel 7
Pixel 7 Pro
Pixel 6
Pixel 6 Pro
PIxel 5
Pixel 4
Pixel 4XL
Pixel 3
Pixel 3 XL
HUAWEI
Huawei P40 Pro
Huawei P30 Pro
DEVICE COMPATIBILITY
All devices must be using a dedicated Quad Lock Case (Original or MAG)
to ensure optimal charging and mounting experience.
(As at March 2023).
WIRELESS CHARGING FUNCTIONALITY IS NOT COMPATIBLE WITH QUAD LOCK UNIVERSAL ADAPTORS

2212-372
CERTIFICATION
Annex products Pty Ltd, Australia, declares that
the product “OEM Wireless Charger 12V” is in
compliance with RED Directive (2014/53/EU),
EMC Directive (2014/30/EU), CE-LVD Directive (2014/35/
EU) and EN 50498.
The CE certificate of conformity can be found at:
www.quadlock.com.au/compliance
Annex products Pty Ltd, Australia, declares that
the product “OEM Wireless Charger 12V” is in
compliance with the following Directives: Radio
Equipment Regulations 2017, electrical Equipment
(Safety) Regulations 2016 and The Restrictions of the Use
of Certain Hazardous Substances in Electrical and
Electronic Equipment 2012.
The certificate of conformity can be found at:
www.quadlock.com.au/compliance
INDUSTRIE CANADA (IC: 27134-QLO)
IC Caution:
This device contains licence-exempt transmitter(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference, 
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
RF exposure statement:
This equipment complies with ISED radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and a
human body.
IC Caution:
L’émetteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences
et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Declaration d’exposition RF:
Cet équipement est conforme aux limites d’exposition
aux rayonnements ISED établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé
avec une distance minimale de 20 cm entre le radiateur
et un corps humain.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and a
human body.