Quadro Qtv User manual

Rev. OCT 2020
Installation Guide

TABLE OF CONTENTS
WHAT’S IN THE BOX.........................................................................................
SET-TOP BOX AT A GLANCE...........................................................................
REMOTE CONTROL FUNCTIONALITY............................................................
SELF-INSTALL CONNECTION GUIDELINES..................................................
INITIAL BOX POWER ON..................................................................................
NETWORK SETUP.............................................................................................
SERVICE VALIDATION......................................................................................
TROUBLESHOOTING........................................................................................
APPENDIX A – TV CODES FOR REMOTE PAIRING.......................................
APPENDIX B – AUDIO SYSTEM CODES FOR REMOTE PAIRING................
1
2
4
8
12
19
24
25
26
36
KURV 2.0 VOICE REMOTE................................................................................. 20

1
WHAT’S IN THE BOX?
AA Batteries
Power Adapter
RCA Analog
Composite
Breakout Cable
(Optional)
Qtv STB
Set-Top Box
(STB)
HDMI Cable KURV Remote
KURV 2.0 Voice
Remote Control
Shown

2
SET-TOP BOX AT A GLANCE
2 3
Status Indicator LED:
Indicates power status of STB
(Red = O, Green = On).
Infrared (IR) Sensor:
Used to communicate with the
KURV Remote Control.
1
2
3
Top View
1
Power Button:
Used to power the Qtv STB
On or O.
Front View
Qtv 2020 | Installation Guide

3
RJ45:
10/100 Ethernet port used to
connect to a home router.
HDMI:
Digital A/V output, used to
connect to a TV via HDMI cable.
AV Out:
SD Analog A/V output, used
to connect to older-style TVs
that do not support HDMI
connections. Ask your installer
for an RCA composite breakout
cable if one was not included.
S/PDIF:
Optical Audio output, used to
connect to external Sound bar
or Surround Sound system.
An optical cable with TOSLINK
connectors is required (not
included).
12V/1.5A In:
DC Power port, used to connect
via the power adapter.
4
5
6
7
8
USB:
This port has an output
power capability of 5V DC
@ 1 amp.
9
4 5 6 7 8 9
Rear View Side View
Qtv 2020 | Installation Guide

4
REMOTE CONTROL FUNCTIONALITY
2
1
65
4
3
Backlighting Hot Keys
The remote
control is
a motion
detecting
device and will
backlight when
the remote is
picked up or
moved.
Backlighting
will remain on
for 3 seconds.
KURV 2.0 Voice
Remote Control Shown
Qtv 2020 | Installation Guide

5
The following Hot Keys are dedicated short cuts to return the user to
the video service regardless of the content or App being viewed.
MENU:
Displays the Main Menu.
LAST:
Displays the last 15 items that have been watched.
HOME:
Displays the main Android TV menu including access to Apps.
GUIDE:
Displays the Electronic Program Guide (EPG).
SHOWS:
Displays the shows that are presently available for viewing
On Demand (VOD).
MOVIES:
Displays the movies that are presently available for viewing
On Demand (VOD).
1
2
3
4
5
6
Hot Keys
Qtv 2020 | Installation Guide

6
TV POWER:
Powers on or o TV if remote is
programmed with a TV infrared code.
TV INPUT:
Changes video input on TV if remote is
programmed with a TV infrared code.
POWER:
Switches STB power on or into standby
or o mode. Will also control TV power
and audio system after remote has
been programmed with a TV/Audio
Infrared code.
PAGE (Up or Down):
In the GUIDE or MENU screens, scrolls
one page up or down.
MENU:
Launches the MAIN MENU within the
App with Live Video or last viewed On-
Demand program.
LIVE TV:
Tunes to the last content viewed in the
App.
MUTE:
Mutes the audio on your audio device(s)
(TV, Audio System, or STB).
VOLUME (Up or Down):
Increases or decreases volume levels
on your audio device(s).
CHANNEL (Up or Down):
Selects the previous and next available
channels. (Hold for rapid advance.)
Within MENU or GUIDE acts the same
as Page Up/Page Down.
13
2
9
6
13
17
19
21
22
5
8
12
7
4
16
15
18
24
23
20
11
14
10
1
2
3
4
5
6
7
8
9
Button Functionality
KURV 2.0 Voice
Remote Control Shown
Qtv 2020 | Installation Guide

7
11
12
13
14
15
16
17
18
19
20
21
22
23
24
GOOGLE HOME:
Launches AndroidTV main menu including access to Apps.
LAST:
Displays the last 15 items that have been watched.
BACK / EXIT:
Returns to previous menu or state within current App. From live video, this key
opens the Main Menu.
GUIDE:
Launches the Channel GUIDE (EPG) within the App.
ARROWS:
Moves to highlight items in respective direction.
OK / SELECT:
Short Press - Conrms a selection. When watching video in the App, info on
the current video playing appears, including the time shift bar.
Long Press - Invokes the App search menu. This is the same function as the
magnifying glass in the Main Menu.
SHOWS:
Launches the SHOWS play list in the App.
MOVIES:
Launches the MOVIES play list in the App.
SEARCH / VOICE:
Launches text-based Google Assistant search. Launches voice-
based Google Assistant search.
RECORD:
Begin recording selected content in the App.
REWIND:
Fast rewinds VOD, or live TV.
FAST FORWARD:
Fast forwards VOD, or live TV.
PAUSE / PLAY:
Play or Pause toggle of VOD, or live TV.
0-9:
Enters channel numbers in the GUIDE or full screen video.
SET:
Setup the remote to control the TV, and to program an audio device with
Infrared (IR) commands.
10 Qtv 2020 | Installation Guide

8
Connect the Ethernet Cable
to a Router (Optional) Connect the Power Adapter
(100 ~ 240V AC, 50/60 Hz)
Connect the HDMI Cable to the TV HDMI Port and
Select the corresponding HDMI Source on the TV
Output to TV
Power
Input thru WiFi or
Ethernet Cable
HDMI Cable Connection
SELF-INSTALL CONNECTION
GUIDELINES
What You Need
•An HD or Ultra High Denition (UHD) TV that can support 720p, 1080p or 4K UHD.
•A Broadband Internet connection that supports a wired or WiFi wireless home
network (802.11 g, n, or ac).
•Pay TV Operator login credentials (mandatory).
•Google login credentials (optional).
Qtv 2020 | Installation Guide

9
Connect the analog composite cable as shown below. This connection
scheme should only be used if the TV does not have a working HDMI port.
Analog Composite Breakout
Cable Connection
Connect the Ethernet Cable
to a Router (Optional) Connect the Power Adapter
(100 ~ 240V AC, 50/60 Hz)
Connect the Analog Composite to the TV Ports
and Select the corresponding AV Source on the TV
Output to TV
Power
Input thru WiFi or
Ethernet Cable
Video LAudio
Qtv 2020 | Installation Guide

10
Connect the Ethernet
Cable to a Router
Connect the Power Adapter
(100 ~ 240V AC, 50/60 Hz)
Power
Input thru WiFi or
Ethernet Cable
ETHERNET LAN
Network Connection
You must connect your new STB to an internet connection through either a
WiFi wireless connection or a wired Ethernet connection.
Wired Network Connection
If your home router is near the STB location, a CAT-5/5e/6 Ethernet cable may
be used for internet connectivity. Plug one end of the CAT-5/5e/6 cable into
the STB RJ45 port. Plug the other end of the cable into any LAN port of your
home router.
Qtv 2020 | Installation Guide

11
Connect the Power Adapter
(100 ~ 240V AC, 50/60 Hz)
WiFi Network Connection
Connect Automatically Using WPS
Navigate to the Android main menu by pressing the following key sequences:
Home —> Settings —> Network —> WiFi —> Select to enable.
Once WiFi has been enabled, using the remote scroll down and select
“Connect via WPS”.
Once selected press the WPS button on your home router. The Set-Top Box will
automatically connect to the WiFi network.
Ensure that WiFi network signal strength is strong or very strong .
Connect Manually
If your home WiFi router does not have a WPS button, you can connect
manually. Navigate to the Android main menu by pressing the following key
sequences:
Home —> Settings —> Network —> WiFi —> Select to enable.
Once WiFi has been enabled, using the remote scroll down and select the
required network and press OK. When prompted, enter your WiFi password
using the remote. Alternately a USB keyboard may be plugged into the USB
port of the Set-Top Box. Type password on keyboard as required.
Ensure that WiFi network signal strength is strong or very strong .
Qtv 2020 | Installation Guide

12
INITIAL BOX POWER ON
Qtv 2020 | Installation Guide
The following screens describe the remote key sequences required to setup the
KSTB2020. When powered up and fully booted, the box will start on this screen.
The three digit number will be unique and change each time the remote is paired.

13
Qtv 2020 | Installation Guide
If the end user wishes to login with their Google ID they may do so at this point.
If not, select Skip and press OK to continue.
Select Skip and press OK to continue. The following screen will be displayed.

Once logged in, the following Terms of Service screen will be displayed.
Select Accept and press OK to continue.
Select Yes on the Location screen and press OK to continue.
14
Qtv 2020 | Installation Guide

On the Help Improve screen, select Yes and press OK to continue.
On the Choose a Name screen, select the appropriate name for the unit and
press OK to continue.
15
Qtv 2020 | Installation Guide

The following Get Started screen will display the login where your Cable Provider
App will be located. This app cannot be unselected. Select Continue and
press OK to get to the next screen.
On the Welcome screen, arrow right ve times to get to the next screen.
16
Qtv 2020 | Installation Guide

Select Done and press OK to continue.
When it is nished processing, the Login screen will be displayed.
17
Qtv 2020 | Installation Guide

An example login screen is shown. This will be unique for each subscriber.
Credentials may be entered using the remote or via a USB keyboard
(recommended).
Once logged in, the following screen will be displayed. Select “DETAILS” to be
prompted for Wi-Fi network section and sign in. Alternately an Ethernet cable
may be connected at this time.
18
Qtv 2020 | Installation Guide