Queclink GB100CAU User manual

GV50MG User Manual
GB100CAU User Manual
EGPRS /GPRS/WCDMA/LTE Cat 1/GNSS Tracker
QSZTRACGB100CAUUM0100
Version: 1.00

GB100CAU User Manual
Document Title GB100CAU User Manual
Version 1.00
Date 2020-06-12
Status Released
Document Control ID QSZTRACGB100CAUUM0100
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has not
undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of the
customer or the customer’s system integrator. All specifications supplied herein are subject to
change.
Copyright
This document contains proprietary technical information which is the property of Queclink.
Copying of this document, distribution to others or using or communication of the contents
thereof is forbidden without express authority. Offenders are liable to the payment of damages.
All rights are reserved in the event of a patent grant or registration of a utility model or design.
All specifications supplied herein are subject to change without notice at any time.
Copyright © Queclink Wireless Solutions Co., Ltd. 2020
QSZTRACGB100CAUUM0100

GB100CAU User Manual
Contents
0. Revision History.............................................................................................................................1
1. Introduction ..................................................................................................................................2
1.1. GB100CAU Products............................................................................................................2
1.2. Reference.............................................................................................................................2
2. Product Overview..........................................................................................................................3
2.1. Product Appearance............................................................................................................3
2.2. LED Description ...................................................................................................................3
2.3. Parts List ..............................................................................................................................3
3. Interface Definition .......................................................................................................................4
4. Getting Started ..............................................................................................................................5
4.1. Opening the Case ................................................................................................................5
4.2. Closing the Case ..................................................................................................................5
4.3. Installing SIM Card...............................................................................................................6
4.4. Power Connection ...............................................................................................................6
5. Installation Precautions.................................................................................................................7
6. Troubleshooting and Safety Info ...................................................................................................8
6.1. Troubleshooting...................................................................................................................8
6.2. Safety Info............................................................................................................................8
QSZTRACGB100CAUUM0100

GB100CAU User Manual
0. Revision History
Version Date Author Description of Change
1.00 2020-06-03 Eddy Qi Initial
QSZTRACGB100CAUUM0100 1

GB100CAU User Manual
1. Introduction
The GB100CAU is a device designed for self-installation by the customer. It is a telematics
device based on LTE CAT1/WCDMA/EGPRS supporting Bluetooth. Its built-in accelerometer
allows motion detection, incident detection, 100/200/400Hz pre/post incident data
collection and extends battery life through sophisticated power management algorithms.
System integration is straightforward as complete documentation is provided for the full
featured @Track protocol. The @Track protocol supports a wide variety of reports
including emergency, geo-fence boundary crossings, driving behavior, low battery and
scheduled and compressed GPS position reports.
1.1. GB100CAU Products
Table 1. GB100CAU Products
Model No. Region Technology and Operating Band
GB100CAU Latin America
LTE FDD:
B2/B4/B5/B7
LTE FDD: Max 10Mbps (DL)/Max 5Mbps (UL)
WCDMA: B2/B5
DC-HSDPA: Max 42Mbps (DL)
HSUPA: Max 5.76Mbps (UL)
WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GPRS&EGPRS:850/1900 MHz
EGPRS:Max 296Kbps (DL)/Max 236.8Kbps (UL)
GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)
1.2. Reference
Table 2. GB100CAU Protocol Reference
SN Document name Remark
[1] GB100CAU @Tracker Air Interface Protocol
The air protocol interface between
GB100CAU and backend server.
QSZTRACGB100CAUUM0100 2

GB100CAU User Manual
2. Product Overview
2.1. Product Appearance
Figure 1. Appearance of GB100CAU
2.2. LED Description
Table 3. GB100CAU LED Description
LED Device Status LED Status
PWR LED The internal battery of device is in charge Fast flashing
The internal battery of device is full On
The internal battery of device is low Slow flashing
GPS LED GNSS is unfixed Fast flashing
GNSS communication error, verification error or antenna error Slow flashing
GNSS is fixed On
GNSS chip is powered off OFF
CEL LED The device is registering to network Fast flashing
The device registers to network successfully Slow flashing
Note:
1. Slow flashing: LED is about 200ms ON/1000ms OFF.
2. Fast flashing: LED is about 100ms ON/200ms OFF.
2.3. Parts List
There is only the device.
QSZTRACGB100CAUUM0100 3

GB100CAU User Manual
3. Interface Definition
The GB100CAU has a 2-pin power cable. The pin definition of the 2-pin power cable is as below:
Table 4. Description of 2-pin Power Cable
Cable Colour Definition Comment
Red VIN External DC power input, 8-32V
Black GND Ground
QSZTRACGB100CAUUM0100 4

GB100CAU User Manual
4. Getting Started
4.1. Opening the Case
Insert the triangular-pry-opener into the gap of the case as shown below, push the opener up
until the case unsnapped.
Figure 2. Opening the Case
4.2. Closing the Case
Make sure the silicon rubber seal ring is in the gap of front case.
Put the power cable wire holder in the rubber groove of rear case.
Place the cover on the bottom in the position as shown in the following figure. Press the
cover until it snapped (press the CEL antenna side firstly).
Figure 3. Closing the Case
QSZTRACGB100CAUUM0100 5

GB100CAU User Manual
4.3. Installing SIM Card
Open the case and ensure the unit is not powered. Slide the holder to right direction to open the
SIM card slot. Insert the SIM card into the holder as shown below. Close the SIM card holder and
then close the case.
4.4. Power Connection
PWR (pin 1)/GND (pin2) are the power input pins. The input voltage range for this device is from
8V to 32V. The device is designed to be installed in vehicles that operate on 12V/24V without the
need ofexternal transformers.
Note: Donotconnect anyexternal cables to GB100CAU device.
QSZTRACGB100CAUUM0100 6

GB100CAU User Manual
5. Installation Precautions
Firmly install the device to a reliable surface to prevent falling off.
Make the side with antenna face sky to have better signal reception.
Do not install the device under metal surface or in enclosed environments having difficulty
in getting GPS and network signal.
QSZTRACGB100CAUUM0100 7