Quiksilver Fragment User manual

FRAGMENT INSTRUCTIONS MANUAL

FEATURES & FUNCTIONS
Time/Date
• Hours, minutes, and second display in 12Hr or 24Hr format.
• DOW – Date display
Chrono
• Hundredth seconds resolution
• 24 hour maximum
Alarm
• Hour and Minute elds
Other Features:
• 3 VDC Operating Voltage
• 3 VDC Operating Voltage
• Electro-luminescent (EL) backlight
• Four (4) buttons operation
• Hourly Chime

ENTRÉE / SORTIE
LCD Full Segment On

Flags
INPUT/OUTPUT
ICON NAME ICON NAME
24 24-Hour Format Chime/Keytone
PPM Alarm

Small Digits
Big Digits
Font Table
INPUT/OUTPUT

MODE LOOP
Mode Loop
Time of Day Mode
Power-On Defaults
Field Value
Time 12:00AM
Date January 1
Day of Week Sunday
Date Format DOW Date
Boundary Conditions
Field Value
Date Format DOW-Date
Hour 1 to 12 (12H), 0-23 (24H)
Minute 0 to 59
Second 0 to 59
Month 1 to 12
Date 1 to 28, 29, 30, 31 (depending on MONTH)

TOD Alarm
Chronograph
TOD Setting State: Seconds Set
90 Seconds Timeout
Press [S2]
Press [S2]
Press [S2]
or
2 minutes timeout
TOD Hour Set TOD Minute Set TOD Month Set
TOD Date Set
TOD Day Of Week Set
TOD Default
Press [S3]
Press [S2]
Toggle 24Hr Format
Press [S4]
Press [S2]
]3S[ sserP
]3S[ sserP
]3S[sserP
Press[S3]
MODE LOOP

NOTES
1. After power on reset, the default Mode to appear is TOD. All
buttons are active then.
2. The sequence for the main mode loop will start from TOD ->
Alarm -> Chronograph -> Entry to TOD Setting State then back to TOD.
3. While inside Alarm’s default state and idle for 90 seconds, it will
return automatically to TOD. When in Alarm’s setting sta te, if idle for 2 minutes
then it will Auto-return to TOD.
MODE LOOP


4. In TOD Setting State, the following button functions are applied:
- [S2] Mode / Set, exit from setting state.
- [S3] Reset, move from current eld to the next eld.
- [S4] ST/SP, adjust the value of the eld in incrementing order,
wraps to the lowest possible when it reaches to the highest value.
Except for the seconds eld where it will be reset to 00 when being
adjusted..
- [S1] EL, no special function except for turning EL on.
5. The EL will activate during button press and will stay for 3
seconds after the key release.
MODE LOOP

Chronograph Mode
CHRONOGRAPH MODE
Power-On Defaults
Field Value
Chrono 00:00:00
Status RESET
Boundary Conditions
Field Value
Hour 0 – 23
Minute 0 – 59
Second 0 – 59