Quoizel QR3330 User manual

- of 2 -1
Mirror
x1
A
BB
PACKAGE CONTENTS
OPTION A
Released Date: 2021-10-11
CARE AND MAINTENANCE
SAFETY INFORMATION
INSTALLATION GUIDE FOR
QR3330, QR3331, QR3332 and QR5366
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
AA
Please read and understand this entire manual before attempting to assemble, install or operate the product.
CAUTION
• For your safety, read instructions completely before beginning installation.
• Quoizel recommends 2 people for each step during assembly.
TOOLS REQUIRED
MOUNTING HARDWARE
Mirror Hanger
x 2
Hanger Nail
x 4
NOTE: There are two options (Templates or Measurement) for identifying correct locations for Nails.
VERTICAL
HORIZONTAL
Mark Nail Locations
On The Wall At
Arrow Locations
TEMPLATE
TEMPLATE
19.5”
4.75” 4.75”
2.25”2.25”
8.75”8.75”
2” 2”
31.75”
Mark Nail Locations
On The Wall At
Arrow Locations
Option A Identify Nail Points for mounting-
the Mirror Hangers By Using Template
The template included with package is provided
to assist you in placing the mirror in the location
you desire. The template is a full size drawing of
your mirror and includes hanger mounting
locations that your mirror maybe hung.
Place the template on the wall in the location you
have selected for your mirror. Once you have the
template in the location you desire and making
sure it is level you may tape or pin the template to
the wall. Now you may mark the holes for the
mounting hardware as indicated on your
template. You may mark the mounting hardware
location by either using a pin and pushing it
through the template leaving a small hole on the
wall. Or you may use a pencil and place a mark
on the wall through a small hole you cut into the
template at the correct mounting location.
Remove the template from the wall and install the
Mirror Hangers as described in Step 1.

- of 2 -2
OPTION B
1
Installing the 2 Mirror Hangers
2
Hanging the Mirror
Clean glass with household glass cleaner. Retain this sheet for future reference.
INSTALLATION
Hanger
"A” Floor Surface
"B”
"C”
BACK
”A”
"B”
"C”
BACK
VERTICAL HORIZONTAL
Hanger
Option B Identify the Points for mounting the Mirror Hangers By Using-
Measurement
A. Determine where the mirror will be placed on the wall and hold the mirror on the wall in
the position you wish. Mark the wall at the bottom center of the mirror with a pencil
lightly. This will be Measurement A, the distance from the floor to the bottom of the
mirror.
B. Place the mirror on a flat surface again and measure from the bottom of the mirror to the
hangers that will be used to hang the mirror, this is measurement B.
C. Add measurement A from step A above and measurement B together and mark this spot
on the wall where the mirror will be hung. Measurement B is straight up from
Measurement A you marked on the wall in step A above.
D. Measure the distance between the centerline of each hanger and then divide this
measurement by 2, this is Measurement C. In order to locate the exact hanger location
on the wall, from Measurement B go to the right the distance of Measurement C and
mark the wall. Do this going to the left of Measurement B as well and mark the wall.
These two marks are the center of the hangers, Measurement C. The two marks you just
made on the wall are the same distance apart as the two hangers.
C
Mirror Hanger
Hook
Mark "B"
3”
C
E. To determine where the Mirror
Hangers will be fastened to the
wall, measure up from
Measurement C 3”. Do this in
two locations as illustrated and
mark the wall.
F. Refer to Step 1 to install Mirror
Hangers on the wall.
Hange Nailr
Mirror Hanger
Adjustment Screw
Hook
A. Using the Nails provided with the Mirror Hangers
attach the 2 Mirror Hangers to the wall at the
position just marked by Option A or Option B.
Please note the Mirror Hangers are adjustable
allowing for easy leveling of the mirror as
needed.
B. Once you have both Mirror Hangers securely
nailed in place, adjust as the length of the Mirror
Hangers so that each Mirror Hanger is the same
length.
Mirror Hanger
Bracket
Catch
Hanger
VERTICAL
Hanger
Bracket
Catch
Mirror Hanger
HORIZONTAL
A. With the help of another person place the mirror onto the mirror
hanger hooks. Making sure each hook is securely hooked into the
hangers before letting go of the mirror.
B. If needed you May remove the mirror and adjust the mirror hanger
hooks to level the mirror and replace the mirror.