Package Contents
Warnings and Cautions
1of2
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
B
Lock
Screw
x4
Inner Backplate
x1
STEP 1 Install Inner Backplate-
A. Race all supply wires through the
Inner Backplate (A) as shown.
Attach Inner Backplate (A) to Outlet
Box with the head of Green Ground
Screw facing you. Secure it with
Outlet Box Screws (not included).
Tighten until snug.
A
DFixture Body
x1
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires between Inner Backplate (A) and
Fixture Body (D).
White wire
from supply White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
STEP 4 - Install Shade and Bulb
Note:
A. Place Shade (E) over Socket and secure with the Socket Collar (F).
Hand tighten until snug.
B. Install either the G9 Xenon bulb as specified (not provided) or install
the G9 LED bulbs (provided) if the fixture purchased is the LED
model.
This fixture is rated to use 60W maximum G9 Xenon bulbs.
You may use a lower wattage G9 Xenon or if you purchased the LED
model it is supplied with G9 LED bulbs.
Your fixture is now assembled and ready to use. Enjoy!
F
Socket
Figure 4
EShade
x3
FSocket Collar
x3
C
Outlet Box
Supply Wires and
Ground Wire
A
Outlet Box Screw
(not supplied)
Figure 1
STEP 3 Install Fixture Body-
A. Place the backplate of the Fixture Body (D) onto the Inner Backplate
(A) and secure with Lock Screws (B). Hand tighten until snug with
screwdrivers.
E
C
Assembly Instruction Sheet #IS-TU8603_R1
For Styles TU8603BNLED and TU8603CLED
Pleasegoto forproductcleaningtips.Gotothe selection.
(3)LEDG94.5WBulbs
PleasegotoQuoizel.comtoseetheG9LEDbulbspecificationsprovidedwithyourfixture.
www.quoizel.com Care + Maintenance
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
BulbRecommended:
EstimatedAssemblyTime:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
LED G9 Bulb
x3
AA
B
D
Figure 3
2016 QuoizelInc. RevisedDate:2016-06-08
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
