Quoizel QR3329 User manual

- of 2 -1
Mirror
x1
A
BB
PACKAGE CONTENTS
INSTALLATION
Released Date: 2021-09-28
CARE AND MAINTENANCE
SAFETY INFORMATION
INSTALLATION GUIDE FOR
QR3329, QR5137 and QR5138
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
AA
Please read and understand this entire manual before attempting to assemble, install or operate the product.
CAUTION
• For your safety, read instructions completely before beginning installation.
• Quoizel recommends 2 people for each step during assembly.
TOOLS REQUIRED
MOUNTING HARDWARE
Mirror Hanger
x 2
Wall Anchor
x 4
The template included with package is provided to assist you in
placing the mirror in the location you desire. The template is a full
size drawing of your mirror and includes hanger mounting
locations that your mirror maybe hung.
Place the template on the wall in the location you have selected
for your mirror. Once you have the template in the location you
desire and making sure it is level you may tape or pin the template
to the wall. Now you may mark the holes for the mounting
hardware as indicated on your template. You may mark the
mounting hardware location by either using a pin and pushing it
through the template leaving a small hole on the wall. Or you may
use a pencil and place a mark on the wall through a small hole you
cut into the template at the correct mounting location.
Remove the template from the wall and install the Mirror Hangers.
Metal Part
x2
B
CC Screw
x 4 DD Allen Wrench x 1
1
Identify Screws Locations for mounting
the Mirror Hangers By Using Template
Mark Self-tapping Screws Locations
On The Wall Through (4) 0.25” Dia. Holes
0.25”
0.75”
28”
22”
25.25”
2” Dia.
0.25” Dia. 11.75”11.75”
TOP
TEMPLATE

- of 2 -2
INSTALLATION
2
Installing the 2 Mirror Hangers
3
Hanging the Mirror
Clean glass with household glass cleaner. Retain this sheet for future reference.
A. Using a 1/8” drill bit, drill holes at each locations marked
on the wall surface.
B. Insert wall anchors into drilled holes completely.
C. Using screws provided with the mirror hangers, attach the
2 mirror hangers to wall anchors.
Attach etal arts onto axles on the sides of the irror with themp m
cap end of etal art against irror angers. By holding etalmp m h m
pm mmharts with irror to hang the irror to irror angers on the wall.
Mark
Wall Anchor
Screw
Mirror Hanger Mirror
Mirror
Hanger
Metal Part
4
Adjust Mirror Angle
Set Screw
Allen Wrench
Allen Wrench
Set Screw
Always tighten set screws on metal parts with Allen wrench once your desired mirror angle is achieved.
Axle
Cap End