Quoizel CHI9011IB User manual

Part Description Quantity
A
1pc.
3 pcs.
B
Package Contents
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone [phone]
Fax [phone]
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
A
B
Mounting Screw
Assembly Instruction Sheet #IS-CHI9011IB
For Style CHI9011IB
1of5
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
EstimatedAssemblyTime:20-30 minutes
BulbRecommended: (1)MediumBase100WMaximum
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Fixture Body
October2011

2of5
CHI9011IB
FINISH: IMPERIAL BRONZE
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION REQ.
NO.
(1)100W Medium
Base Bulb
(Not Supplied)
1G2861SH SHADE CLEAR WATER GLASS 1
1
10.5" Dia.
21.5"

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
3of5
Assembly Instruction Sheet #IS-CHI9011IB
For Style CHI9011IB
STEP 1 Drill Pilot Holes on Post-
A. Carefully fit the Post Fitter over the end of the Post (not
supplied), making sure the Post Fitter is fully seated.
B. Mark the drill point for the (3) Mounting Screws, using
(3) Mounting Holes as reference. After marking hole
locations, remove fixture from post and drill 1/16” pilot
holes for screws.
Post
Figure 1
Post Fitter
Figure 2
STEP 2 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Post to White Wire
from fixture.
C. Connect Black (or Red) Supply Wire from the Post to
Black Wire from fixture.
D. Connect Ground Wire from the Post to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Post.
Figure 3
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Post
October2011

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
4of5
Assembly Instruction Sheet #IS-CHI9011IB
For Style CHI9011IB
STEP 3 -Attach Fixture Body to Post
A. Coat the top 1” of the Post with Clear Silicone Caulk
(not supplied) and position the Post Fitter onto the Post.
Be sure to seat it completely, aligning the holes in the
Fitter with the 1/16” Pilot Holes drilled into the Post.
B. Secure the Fixture to Post with (3) Mounting Screws.
Mounting Screw
Post
Figure 4
Post Fitter
Mounting
Hole
STEP 4 Remove Fixture Hood from Cage-
A. Remove the Fixture Hood from the Cage by unscrewing
Lock Screws.
Figure 5
Lock Screw Fixture Hood
Cage
October2011

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Bulb
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
5of5
STEP 5 -Install Bulb
A. standard bulb with a medium screw
base 0
This fixture uses
. Maximum 10 watts.
B. Insert bulb and screw snugly into place.
October2011
Assembly Instruction Sheet #IS-CHI9011IB
For Style CHI9011IB
Figure 6
STEP 6 Attach Fixture Hood to Cage-
A. Place the Fixture Hood back onto the Cage and secure
with Lock Screws. Hand tighten until snug.
Your lamp post fixture is now assembled and ready to use.
Enjoy!
Figure 7
Socket
Lock Screw Fixture Hood
Cage