Quoizel AMR1508MB User manual

1 of 3
INSTALLATION GUIDE FOR AMR1508MB
and A 1708MBMR
CARE AND MAINTENANCE
SAFETY INFORMATION Released Date: 2021-08-19
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
PACKAGE CONTENTS
Crossbar Assembly
x1
AA Wire Connector
x3
BB Outlet Box Screw
x2
CC
ACeiling Canopy
x 1
MOUNTING HARDWARE
D
Fixture
Body
x1
12"L Rod
x2
6"L Rod
x2
B
C
Glass Shade
x1
E
Socket Collar
[pre-assembled
to Fixture Body]
x1
F

2 of 3
1
Install Rods
Optional Rods:
8 Feet Ceiling:
( ) 12"L Rod .2s
9 Feet Ceiling:
( ) 6"L Rods + (2) 12"L Rods.2
3
Install Ceiling Canopy
to Upper Rod
45
Wiring
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
6
Install Ceiling Canopy to Crossbar Assembly
For angled ceilings,
Swivel opening towards wall.
90Degree Swivel
Install Crossbar Assembly
7
Install Glass Shade and Bulb
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
100W
MAX
Install correct bulb referringone
to fixture markings and/or labels
for maximum wattage.
Recommended Bulb
Type (not included):
Outlet Box
INSTALLATION
OPTION 1: PENDANT A 1508MBMR
2
Tighten hex nut inside
of the ceiling canopy

3 of 3
* Set aside the (2) 6"L Rods and (2) 12"L Rods since they are not required for the semi-flush installation.
INSTALLATION
OPTION 2: SEMI-FLUSH AMR1708MB
1
Remove Swivel
2
Install Ceiling Canopy
3
Install Crossbar Assembly
Outlet Box
4
Wiring
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
5
Install Ceiling Canopy to Crossbar Assembly
Your installation is now complete! Restore electricity and save this sheet for future reference.
6
Install Shade and Bulb
Install one correct bulbs referring to fixture markings and/or
labels for maximum wattage.
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
100W
MAX
Recommended Bulb
Type (not included):
Set aside
swivel