Quoizel CHI9011IB User manual

1of3
2019 QuoizelInc.
visit us on-line at www.quoizel.com
ReleasedDate:2019-07-02
For Style CHI9011IB
Installation Guide
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
1BULBREQUIRED
BULBNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs
to cool before replacing.
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
Wiring Bulb
STEP 3 STEP 5
Fixture Body
Drill Holes
STEP 2
BWire Connector
x3
C
AMounting Screw
x3
Remove Pack
Table of
Contents
STEP 1 STEP 4

2of3
2019 QuoizelInc.
visit us on-line at www.quoizel.com
ReleasedDate:2019-07-02
STEP 2
1
2
1 2 3
4
Step 1
Place Post Fitter to Post
Step 2-3
Mark Mounting Holes Location on Post
Step 4
Drill Holes
1/16” Drill Bit
STEP 1 1 2 3
4
Step 1
Separate Fixture Hood from Fixture Body
Step 2
Remove Styrofoam
Step 3
Remove PE Foam and Paper Card
Step 4
Reassemble Glass
Remove
Remove
Remove

3of3
2019 QuoizelInc.
visit us on-line at www.quoizel.com
ReleasedDate:2019-07-02
STEP 4
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 5 1 2
Step 1
Install Bulb
Step 2
Reassemble Fixture Hood