- of 32
INSTALLATION
1
1
1
22
2
1
Install Mirror
A. Determine where the mirror will be placed on the wall and hold the mirror on the wall in the position you wish. Mark the wall at the
bottom center of the mirror with a pencil lightly. This will be Measurement A, the distance from the floor to the bottom of the mirror.
B. Place the mirror on a flat surface again and measure from the bottom of the mirror to the top quarter of Hanging Holes that will be
used to hang the mirror, this is measurement B.
C. Add measurement A from step A above and measurement B together and mark this spot on the wall where the mirror will be hung.
Measurement B is straight up from Measurement A you marked on the wall in step A above.
D. Measure the distance between the centerline of each hang and then divide this measurement by 2, this is Measurement C.ing hole
In order to locate the exact hanger location on the wall, from Measurement B go to the right the distance of Measurement C and
mark the wall. Do this going to the left of Measurement B as well and mark the wall. These two marks are the center of the hangers,
Measurement C. The two marks you just made on the wall are the same distance apart as the two hangers.
E. To determine where the Mirror Hangers (A) will be fastened to the wall, measure up from Measurement C 3”. Do this in two locations
as illustrated and mark the wall.
F. Refer to Step to install Mirror Hangers on the wall.3
C
Mirror Hanger
Hook
Mark "B"
3”
C
Hanging Hole
"A” Floor
Surface
"B”
"C”
BACK
Hanging Hole
"A”
"B”
"C”
BACK
2
Identify the Points for mounting the Mirror Hangers By Using Measurement
