Racelogic VBOX Micro User manual

02 - VBOX Micro Power and LEDs
Connecting Power
The VBOX Micro can be powered from two different types of power source, via the 2 way PWR input socket.
1. Vehicle power outlet socket (via a supplied cigar lighter power cable RLCAB060)
2. Battery power, (Racelogic 2Ah Battery pack RLACS110)
You must connect the GPS antenna before connecting power to the VBOX Micro. This is necessary because on
power-up the VBOX Micro will look for a connected GPS antenna and automatically adjust its gain for optimum
performance.
See technical specification page for voltage input range.
LED Indicators
There are three LED indicators on the top panel of the VBOX Micro: SATS, COMS and LOG.
SATS
Flashing RED to indicate that satellite lock has NOT been attained, Solid GREEN light to indicate a valid satellite lock.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Micro/VBOX_Micro_User_Guide/02_-
_VBOX_Micro_Power_and_LEDs
1

COMS
Illuminates RED to indicate configuration communications via USB, Illuminates YELLOW to indicate CAN
communications.
LOG
Illuminates GREEN indicating data is being logged to the CF card.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Micro/VBOX_Micro_User_Guide/02_-
_VBOX_Micro_Power_and_LEDs
2