Rachio 680474003150 Specification sheet

www.rachio.com/support
Let’s get started!

2
Need help? We’re here for you.
Visit us online at www.rachio.com/support
Email us at [e-mail]
Call us at 844-4-RACHIO
2 Year Limited Warranty
Rachio’s products include a 2 year limited
warranty and a 30 day return policy.
www.rachio.com/warranty
Outdoor Installation
This Rachio controller is designed to be installed
indoors. If you need to install yours outside, a
weatherproof enclosure is required. You can
purchase an enclosure at www.rachio.com/store
For outdoor install instructions visit
www.rachio.com/outdoors

3
What’s in the box?
cover
power adapter 4 screws with anchors
base

4
Wi-Fi Access
2.4 GHz
The Rachio controller uses wireless communications
and must be installed within range of a strong signal
source for optimal performance. If the Wi-Fi signal
strength is low, you may need to move your wireless
router or install a Wi-Fi extender. You’ll need your
Network (SSID) & Password to connect to your network.
This controller cannot connect to 5 GHz networks.
Mobile Device
iOS 9 (or greater)
Android 4 (or greater)
What you’ll need...

5
phillips screwdriver wire strippers
hammer
(for drywall installs)
drill
(for drywall installs )

6
Easy Install
4 Steps

7
Check your sprinkler system.
Test your sprinkler system by turning on each zone
with your old controller. Find and repair any issues
with your sprinkler system prior to installing your
Rachio controller.
Take a few pictures.
Use your phone to take a few photos of your old
controller’s wiring from a few angles. This will come in
handy when it’s time to wire your Rachio controller.
Unplug your old controller.
Disconnect the wires from your old controller and then
remove it from the wall. Now you’re ready to install
your Rachio controller.
Prepare
1

8
Attach it to the wall.
Remove the controller’s cover from the base.
Locate the 4 mounting locations on the base.
Attach the base to the wall using the included
screws. Wall anchors are included for drywall.
Wire it up.
Insert sprinkler wire through the opening
on the base. Connect the wires to the
corresponding terminal locations. Press down
on each terminal tab with a screwdriver to
easily insert or remove each wire.
Connect the power cord.
Insert the power connector into the
controller’s power port in the lower right hand
corner of the wiring bay. Finally, plug the
transformer into a wall outlet.
Install
2

9
Required Wiring
Connect common wires to any of the four terminal locations
labeled with a “C”. Zone wires connect to the numbered terminals
“1-16”. Only install a single valve wire per terminal. Power and
ground wires are not needed.
Advanced Wiring
If you have a master valve, pump start relay, hydraulic indexing
valve, or sensor see Advanced Wiring on page 28.

10
Download the Rachio app. www.rachio.com/appstore
Create a Rachio account. You’ll need to create a username
and password to connect your controller.
Connect your controller to Wi-Fi using the app tutorial. The
Rachio app will guide you through the process. The lights
shown at the right will signal the status of your controller.
Connect
3

11
Light One (Booting Up)
Ablinking light means the device is booting
up. Once the light turns solid you can add the
controller to your account. You’ll be prompted to
confirm the network you want to connect to.
Light Two (Connecting to Wi-Fi)
This light will begin blinking as the controller
tries to connect to your Wi-Fi network. Once
connected to Wi-Fi, the light will turn solid.
Light Three (Connecting to Rachio Cloud)
This light will begin blinking as the controller
attempts to connect to Rachio’s servers. Once
connected, it will turn solid.
Light Four (Online)
This light will begin blinking until you enter the
controller’s serial number. The light will turn solid
once your controller is online.

12
Tips for Connecting
While the controller is compatible with numerous platforms, it
must be setup via the Rachio mobile app for initial activation,
including zone and scheduling configuration.
If the controller fails to connect, a Wi-Fi reset will be required to
clear the controller’s network settings.
To perform a Wi-Fi reset, see page 19.

13
The app will now guide you through the setup
process in order to create your first schedule.
The Rachio controller uses your local weather data combined with
the specifics of your landscape to create accurate and efficient
schedules.
You can change the national weather station you use, or even
choose a personal weather station. Try to find the station that
provides the most consistently accurate results.
Control
4

14
Your Zones
Every yard is different. Customize each zone’s vegetation, soil,
shade, nozzle and slope types. Your controller will use this
information to better predict when and where you’ll need water.
You can adjust each zone over time and your schedules will
automatically adjust, watering more effectively.

15
Your Schedules
Fixed Schedules
Water on a static schedule; Rachio adjusts watering durations
using statistical data and skipping schedules based on local
weather forecasts.
FlexTM Schedules
Water only when needed; Rachio dynamically adjusts watering
days based on soil moisture needs. Promotes root growth and
reduces watering frequency, resulting in a healthier landscape.

16
Advanced Program Features
Smart Cycle
Eliminates runoff and promotes deeper roots by breaking watering
schedules into shorter durations dependent on soil, nozzle, and
slope settings.
Weather Intelligence
Operates as a virtual rain sensor, watering like it knows the future.
Watering schedules are skipped when it has rained and/or will rain.
Water Hammer
Eliminates banging pipes by turning on the next zone before the
prior zone turns off, reducing water pressure from building up.
Rain Delay
Manually pause watering for a specific duration of time. This can
be disabled or adjusted within the app.
Integration Partners
Rachio integrates with numerous platforms and products.
Learn more at www.rachio.com/integration-setup

17
Congratulations!
Your Rachio Sprinkler Controller
is now up and running.

18
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
Manual Controls
ARROW BUTTONS
SELECTED ZONE
SELECT BUTTON
Manually Start and Stop Zones
Press the Arrow Buttons up or down to select the zone you want
to run. Press the Select Button to start and stop the selected
zone. When you start a zone, it will begin watering immediately
and then stop after a short duration.

19
Wi-Fi Reset
Perform a Wi-Fi Reset when you
need to reconnect your controller to
your Wi-Fi network. It will clear the
controller’s network settings, but not
the yard or schedule settings.
Press and hold the Down Arrow and
Select Button simultaneously until
the LED light ring is fully illuminated.
Factory Reset (Cannot be undone)
Performing a Factory Reset
cannot be undone and will clear
the controller’s network, yard and
schedule settings.
Press and hold the Up Arrow and
Select Button simultaneously until
the LED light ring is fully illuminated.

20
Troubleshooting