Radiall R125.630.040 User manual
TECHNICAL DATA SHEET
1 / 4
SOLDER JACK RECEPTACLE
R125.630.040
HERMETIC-WITH CYLINDRICAL CONTACT
Series : SMA
Issue : 1220 A
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
All dimensions are in mm.
. .
pn ao
COMPONENTS
BODY
CENTER CONTACT
OUTER CONTACT
INSULATOR
GASKET
OTHERS PARTS
-
-
MATERIALS
INOX
DILVER P
-
PTFE
-
-
-
-
PLATINGS (
µm
)
GOLD 0.5 OVER NICKEL 2
GOLD 0.5 OVER NICKEL 2
-
-
-
-
Downloaded from Arrow.com.
TECHNICAL DATA SHEET
2 / 4
SOLDER JACK RECEPTACLE
R125.630.040
HERMETIC-WITH CYLINDRICAL CONTACT
Series : SMA
Issue : 1220 A
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
PACKAGING
SPECIFICATION
Standard
Unit
Other
1
-
Contact us
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL
Impedance
50
Ω
Operating temperature
-
40/+100
° C
Frequency
0
-
18
GHz
Hermetic seal
10
-
5
Atm.cm3/s
VS
WR
1.10
+
0,0100
x F(GHz) Maxi
Panel leakage
NA
Insertion loss
0.3
√
F(GHz) dB Maxi
RF leakage
-
(
NA
- F(GHz)) dB Maxi
Voltage rating
500
Veff Maxi
Dielectric withstanding voltage
1000
Veff mini
Insulation resistance
5000
M
Ω
mini
OTHERS CHARACTERISTICS
Assembly instruction
Others
:
Coaxial Transmission Line Only
MECHANICAL CHARACTERISTICS
Center contact retention
Axial force
–
Mating end
27
N mini
Axial force
–
Opposite end
27
N mini
Torque
NA
N.cm mini
Recommended torque
Mating
NA
N.cm
Panel nut
NA
N.cm
Mating life
500
Cycles mini
Weight
1,1500
g
Downloaded from Arrow.com.Downloaded from Arrow.com.
TECHNICAL DATA SHEET
3 / 4
SOLDER JACK RECEPTACLE
R125.630.040
HERMETIC-WITH CYLINDRICAL CONTACT
Series : SMA
Issue : 1220 A
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
RECOMMENDED MOUNTING HOLE DETAIL
PANEL WITH THROUGH HOLE
Frequency range 0 – 18 GHz
VSWR < 1.10 + 0.03 F
PANEL WITH BLIND HOLE
Frequency range 0 – 18 GHz
VSWR < 1.05+0.02F
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
TECHNICAL DATA SHEET
4 / 4
SOLDER JACK RECEPTACLE
R125.630.040
HERMETIC-WITH CYLINDRICAL CONTACT
Series : SMA
Issue :
1220 A
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
MOUNTING INSTRUCTIONS
1 – Degrease and clean connector and box.
2 –Solder the connector on the panel:
Preheating at about 100°c.
Take care not to exceed 250°c during solder operation .
3 –Solder the pin on the track:
-ceramic substrates: preheating at about 100°c.
-other substrates: no preheating required.
NOTE: Please use a small soldering iron ,or hot air soldering system.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
