Radian Raptor 61 User manual
Radian Raptor 61
11 Use 2mm hex key to
Remove Fine Focus Knob.
22 Remove Coarse
Focus Knob.
f/4.5 Imaging APO Telescope
RAPTOR 61 ELECTRONIC FOCUSER
SKU : RT-RAD61-EFOC
Electronic Focuser Upgrade
QUICK START GUIDE
33 Slide Motor knob onto small shaft.
Clamp fits over stainless steel housing.
Tighten clamp with 7/64” hex
key. Confirm free movement
of Fine Focus knob.
Tighten Fine Focus Knob.
44
Test Motor—
Rotate to Engage
& Disengage.
55
66
Attach USB-to-12VDC power
cable. Connect to USB hub
with 1-amp capacity.
Optionally connect to
any 12-volt power source
with 2.1 x 5.5mm power plug.
77
Attach standard USB Cable.
Connect to control computer.
Download & Install
Radian Raptor 61 electronic focuser Alpaca driver.
Connect and control through any ASCOM client software.
The Radian Raptor 61 electronic
focus motor driver functions as an
ASCOM Alpaca focuser device for
use with any ASCOM client program.
A standalone web client is available
for testing and remote control using
any smartphone.
Full details available on our download
page: https://bit.ly/3qf7DUE
