RADLEY 1900PSI User manual
5044-033
1
1900PI PSU WSE
OWNER’S MANUAL
2 Year Limited Warranty on tool
WEAR CSA APPROVED
EYE PROTECTION
WEAR EAR
PROTECTION
WEAR FACE
PROTECTION
1900PSI
PRESSURE WASHER
2 Year
warranty
1
POC SEFCTOS
1900PSI PRESSURE WASHER
Rated voltage AC 120 V , 60 Hz
Rated current 13 A
Rated pressure 1300 PSI
Maximum pressure 1900 PSI
Maximum water inlet pressure 170 PSI
Maximum water inlet temperature 122°F / 50°C
1.4 GPM
Machine weight 18.3 lbs / 8.3 kg
NEED ASSISTANCE?
Call us on our toll free customer support line:
∫
∫Replacement parts
∫Parts missing from package
5044-033
2
1900PI PSU WSE
TBE F CNET
..........................................................................................................1
.................................................................................................................. 2
..................................................................................................................... 3
Included Pieces ..................................................................................................................... 7
Preparation for Operation ................................................................................................... 8
Operation ............................................................................................................................... 11
Maintenance ........................................................................................................................ 14
....................................................................................................................15
...................................................................................................................... 17
Parts ........................................................................................................................................18
...............................................................................................................................20
IMPORTANT!
SAFETY INSTRUCTIONS
ALL OPERATORS MUST READ THESE INSTRUC-
TIONS BEFORE USE
SFT ANNS
DANGER
-
ing:
∫
∫
∫
∫
∫
∫
Risk of electric shock. Inspect the cord before using the device. Do not use it if the
cord is damaged.
∫
dangerous if misused, and therefore must not be directed at people, animals, electri-
cal devices or the unit itself.
∫
-
tion.
-
WARNING - INJECTION HAZARD
∫
CAUTION - DETERGENTS
∫
-
CAUTION - SPRAY GUN
∫
-
3
5044-033
4
1900PI PSU WSE
CAUTION - WATER CONNECTIONS
∫
∫
∫
∫
READ ALL INSTRUCTIONS BEFORE USING THIS PRESSURE WASHESR
∫
∫Suitable water temperature: from 5 to 40°C/41 to 104°F
CAUTION - USE
∫
with the controls.
∫
∫Avoid accidental starts. Shut power OFF before connecting or disconnecting the
power cord.
∫
∫Do not pull on the cord to disconnect from the outlet.
∫
operation.
∫
∫Do not stand on unstable surfaces. Stand with both feet balanced at all times.
∫Keep the operating area clear of people and pets.
IMPORTANT - MAINTENANCE
∫
∫
∫
parts.
∫
∫
the pressure.
INTENDED APPLICATION
not designed for industrial use. Please refer to the icons below for suggested applica-
5
IMPORTANT
Stairs Lawn
equipment
Vehicle Driveway
Siding Fencing Deck or patio Garage
SAVE THESE INSTRUCTIONS FOR REFERENCE
SAFETY WARNING AND ELECTRICAL INFORMATION
WARNING
∫
EXTENSION CORDS
observe all warnings and instructions listed below:
WARNING
∫
CAUTION - USE A SUFFICIENT GAUGE
∫
∫
store indoors while not in use.”
∫
∫
disconnect the device.
∫
∫
the extension cord from the product.
∫
touch the plug with wet hands.
5044-033
6
1900PI PSU WSE
SERVICING OF A DOUBLE INSULTATED APPLIANCE
grounding. Grounding means are not provided for a double insulated product, nor
should grounding means be added to the product. Servicing a double insulated product
-
Replacement parts for a double insulated product must be identical to the original
READ ALL INSTRUCTIONS BEFORE USING THIS PRESSURE WASHER
7
ICDD PES
missing and damaged, do not attempt to assemble or use the product.
567910
11
12
13
8
14
15
16
17
1
2
3
4
1. Handle 2. Hose reel
17. Crank
5044-033
8
1900PI PSU WSE
PERTO FR ORTO
ALWAYS USE THE HANDLE TO TRANSPORT.
HOW TO SET UP YOUR UNIT
1. Install gun holder.
NOTE:
3. Install hose reel crank to hose reel handle after have the grooves aligned.
9
4.
Insert the lance into the gun. Push and turn the lance clockwise onto the gun until
-
be inserted into the gun for proper use.
5. Attach the high pressure hose to the pressure water outlet of the machine.
Push button to remove hose.
2
1
If there is a hose with universal connector at hand to use, attach the hose connect
the hose to the thread end of hose connect adapter.
Hose connect adapter (Quick release-thread connect)
5044-033
10
1900PI PSU WSE
6. Attach the high pressure hose to the gun.
the adapter and another end to water source.
WARNING:
ORTO
TO WASH WITH WATER
NOTE:
position.
WARNING: Do not start the machine without connecting and turning on the water
of the pump.
tap.
NOTE:
UNLOCK
LOCK
back on the collar on the lance and pull out the nozzle.
0°NOZZLE-RED
25°NOZZLE-GREEN, 40°NOZZLE -WHITE
surface cleaning.
SOAP NOZZLE-BLACK
11
5044-033
12
1900PI PSU WSE
has the least power stream.
WARNING!
0°nozzle-red
25°nozzle-green
40°nozzle-white
Soap nozzle-black
Pull out the nozzle.Pull in the nozzle.
to surface.
WARNING:
13
5. Add and use detergent. Detach the soap tank cap and add appropriate detergent.
and right to decrease and increase the dosage.
NOTE
detergent outside of the tank.
hose reel.
NOTE: Pull the hose reel handle out and uncoil hose from the hose reel before use.
Hose clip
5044-033
14
1900PI PSU WSE
MITNNE
WATER FILTER AND NOZZLE CLEANING INSTRUCTIONS
-
SOG
Do not store pressure washer outdoors.
Do not store pressure washer where it might freeze while there's water inside the ma-
chine.
TIPS FOR EXTENDING THE LIFE OF YOUR PRESSURE WASHER
1. Never operate machine without water.
dish soap, etc.
buildup will damage pump.
15
TOBEHON
PROBLEM POSSIBLE CAUSE AND SOLUTION
Unit will not start. -
tion. Plug in the electrical cord. to a grounded 120
-
ed and should not be used. Use another electrical
outlet. Press the reset button on GFCI power box. If
the color of red is not visible in the little window on
the GFCI, unplug and plug in again. Press reset, and
look for the red color in the window, this should
again.
into another electrical outlet and repeat the above
procedure.
problem?
wiggle, twist and/or pull the rubber sleeve down
until the entire tip is visible plus an 1/8” / 3.175 mm
into place and will not come out until the hose is
with a sharp knife if unable to move the sleeve
down. Be careful not to cut or puncture the hose
Check the water source. Unclog the nozzle on
problem is with the lance.
high pressure hose connects to
Make sure there is an o-ring at the end of the metal
tip of the high pressure hose. If no o-ring is pres-
gun will leak.
5044-033
16
1900PI PSU WSE
I can’t remove the lance from
do?
All lances and detergent tank are attached and
-
lance in an upright position with the nozzie end on
to loosen the connection, and then follow the
water or a lubricant in the area where the lance
not turn back on. Do I have a
defective unit?
turns the power washer on. Or the power switch
same time, turn the power switch on.
17
EPDD VE
4143
42
40
36
39
37
38
30
31
34
33
35
32
29
27
191817151413
9
4
1
2
3
20
21
22
23
454647
16
24
25
26
44
7
8
5
6
1210
11
28
5044-033
18
1900PI PSU WSE
PRS LS
WARNING:
-
POS. NO PART SKU PART NAME QUANTITY
1 BUAK021001 power cord 1
2 BUAK021002 power cord cover 1
3 BUAK021003 1
4 BUAK021004 7
5 BUAK021005 detergent tube tip 1
6 BUAK021006 detergent tube 1
7 BUAK021007 detergent tank 1
8 BUAK021008 detergent tank cap 1
9 BUAK021009 24
10 BUAK021010 2
11 BUAK021011 nozzle cover 4
12 BUAK021012 handle cover 1
13 BUAK021013 crank handle cover 1
14 BUAK021014 crank handle 1
15 BUAK021015 right hose reel 1
16 BUAK021016 handle 1
17 BUAK021017 high pressure hose clip 1
18 BUAK021018 left hose reel 1
19 BUAK021019 2
20 BUAK021020 gun 1
21 BUAK021021 lance 1
22 BUAK021022 1
23 BUAK021023 0° nozzle 1
24 BUAK021024 25° nozzle 1 1
25 BUAK021025 40° nozzle 1 1
26 BUAK021026 low pressure nozzle 1 1
19
27 BUAK021027 motor fan housing 1 1
28 BUAK021028 gun holder 1
29 BUAK021029 1
30 BUAK021030 wheel 2
31 BUAK021031 wheel cover 2
32 BUAK021032 main switch 1
33 BUAK021033 switch pole 1
34 BUAK021034 switch cover 1
35 BUAK021035 1
36 BUAK021036 front housing 1
37 BUAK021037 knob 1
38 BUAK021038 knob ornamental 1
39 BUAK021039 water outlet button 1
40 BUAK021040 motor upper clamp 1
41 BUAK021041 motor pump kit 1
42 BUAK021042 motor bottom clamp 1
43 BUAK021043 rear housing 1
44 BUAK021044
1
45 BUAK021045 high pressure hose 1
46 BUAK021046 water inlet screw 1
47 BUAK021047 nozzle pin 1
This manual suits for next models
1
Table of contents
Other RADLEY Pressure Washer manuals
