RADWAG PSW User manual

Weighing
T
ables
PSW
PSW/DUAL
USER MANUAL
IMMU-40-03-11-19-EN
www.radwag.com

- 2 -
NOVEMBER 2019

- 3 -
Contents
1. INTENDED USE...........................................................................................4
2. TABLE UNPACKING...................................................................................5
2.1. Table Equipment......................................................................................5
2.1. PSW Table Unpacking – Steps...............................................................6
2.2. PSW/DUAl Table Unpacking - Steps....................................................11
3. DIMENSIONS .............................................................................................16
4. PSW TABLE ASSEMBLY..........................................................................18
5. PSW/DUAL TABLE ASSEMBLY...............................................................24
6. MAINTENANCE ................................................................................30

- 4 -
1. INTENDED USE
The weighing table is intended for microbalances and analytical balances.
It may also be used as a pipettes calibration workstation.
The table is designed to enable fast, comfortable and ergonomic operation.
The external construction of the table comprises an in-built separated
anti-vibration table with stone top. With this potential vibrations are eliminated
and balance stability time is shortened.
The table is both functional and ergonomic.
Intended area of use:
•Pipette calibration workstation;
•Laboratory workstation for microbalances;
•Laboratory workstation for analytical balances;
There are two versions of the workstation:
•PSW professional single weighing table
•PSW/DUAL professional dual weighing table
The workstation comprises two elements:
•desk with lockers,
•anti-vibration table with stone top.
The desk is made of HPL laminated chipboard. It is equipped with two lockers
and a sliding shelf for a computer, a keyboard and a mouse. The weighing
table provides space for an emergency UPS power supply or a power strip.
At the back of the table top there is a platform for placing an LCD monitor.
The anti-vibration table is made of powder-coated stainless steel. The top
of the anti-vibration table is a 410×270×115 mm granite stone.

- 5 -
2. TABLE UNPACKING
Take all table components out of the packaging. Make sure to follow the steps
described in the following sections of the user manual. Check if nothing is
missing.
2.1. Table Equipment
PSW
table
PSW/DUAL
table
Internal frame supporting stone top 1 1
External design of the workstation 1 1
Stone top - balance base 1 2
Monitor stand 1 1
Liquid container 1 1
Electronic components
PSW
table
PSW/DUAL
table
PC 1 1
LCD 1 1
Wireless keyboard 1 1
Wireless mouse 1 1
Power strip 1 1
THB-3/3 thermo-hygro-barometer 1 1
THB-2-50 sensor 1 1
THB-R ambient conditions recorder 1 1
Liquid aspirator 1 1

- 6 -
2.1. PSW Table Unpacking – Steps
Undo the OSB boards (1; 2.1; 2.2; 3.1; 3.2), follow arrow-indicated direction.

- 7 -
Remove the protective styrofoam panels (1; 2.1; 2.2; 3.1; 3.2), follow arrow-
indicated direction.

- 8 -
Remove the monitor stand (1), follow arrow-indicated direction.
Take out the table equipment (2.1; 2.2; 2.3; 2.4), follow arrow-indicated
direction.
-2.1- monitor
-2.2- computer
-2.3- keyboard
-2.4- power strip

- 9 -
Remove the weighing table (1) from the pallet, follow arrow-indicated
direction.

- 10 -
Remove the plate base (1) from the pallet, follow arrow-indicated direction.
Take the stone (3) out of the box (2), follow arrow-indicated direction.

- 11 -
2.2. PSW/DUAl Table Unpacking - Steps
Undo the OSB boards (1; 2.1; 2.2; 3.1; 3.2), follow arrow-indicated direction.

- 12 -
Remove the protective styrofoam panels (1; 2.1; 2.2; 3.1; 3.2), follow arrow-
indicated direction.

- 13 -
Remove the monitor stand (1), follow arrow-indicated direction.
Take out the table equipment (2.1; 2.2; 2.3; 2.4), follow arrow-indicated
direction.
-2.1- monitor
-2.2- computer
-2.3- keyboard
-2.4- power strip

- 14 -
Remove the weighing table (1) from the pallet, follow arrow-indicated
direction.

- 15 -
Remove the plate base (1) from the pallet, follow arrow-indicated direction.
Take the stones (3) out of the box (2), follow arrow-indicated direction.

- 16 -
3. DIMENSIONS
PSW table

- 17 -
PSW/DUAL table

- 18 -
4. PSW TABLE ASSEMBLY
4.1. Workstation Assembly
CAUTION: Be extremely careful when assembling the workstation since
some components, e.g. stone top, are heavy and may pose a hazard.
Follow the below steps to assembly the workstation.

- 19 -
Procedure:
1. Place the internal frame (1) on its target spot.
2. Place the stone top (2) onto shock absorbers. Mind that the top
cannot touch side stops.
3. Install the external design (3) of the workstation.
Make sure to keep about 10 mm distance between the stone top and the
sides of the weighing table.
4. Install the monitor stand (4)
5. Install the liquid container inside the right locker (the container has to
be installed in a holder inside the locker). Connect the flexible wires to
the container.
Now you can equip your workstation with electronic components.

- 20 -
Connect the workstation components, refer to the schematic diagram and to
the equipment and cables descriptions.