Rahrbach ERGO 6188 Series User manual

50
• Self-closing latch with adjustable closing force
• non-lockable
• Wide variety of surface finishes
Edge-mounted latch
Series 6188 ERGO

208,7
33,3
24
8,5
185,5
5,2
18 150
12
5151
Locking technology for heated applications.
Materials
Base plate: Die-cast zinc, zinc-plated
Housing: Die-cast zinc, chrome-plated
Handle: Die-cast zinc, chrome-plated
Strike: Die-cast zinc, chrome-plated
Latch: Die-cast zinc, zinc-plated
Caps: Plastic
Pins: Steel, zinc-plated
Springs: Spring steel
Screws: zinc-plated
Other components: Plastic or die-cast zinc
Finish: chrome-plated
Note: Please also see the assembly instructions.
Enough with drafts! This edge-mounted latch doesn’t allow even the slightest breeze and ensures a constant tem-
perature in hot appliances, warming units and counters. You can always rely on the self-closing latch with adjusta-
ble closing force. You’ll never be caught out in the hot handed with this one — also in terms of safety, because the
plastic cap on the chrome handle protects fingers as well as it does the temperature.

52
6188-020028
Edge-mounted latch, chrome-plated
Variant

5353
Locking technology for heated applications.

Z
Dichtung
U-Platte
Korpus
Kloben
18
38 26
7
26
6,2
5
Gasket
Body
Shim
Strike
54
6188-020208
Shim 5 mm, plastic
6188-020207
Strike, chrome-plated
Strike
Strike without
shim
1x
shim
2x
shim
Z = 16-21mm Z = 21-26mm Z = 26-31mm
Shim
Z-Dimensions Strike with shim 5mm
Strike table
→ Standard item → On request

12
5,5
10,5
9
12
7,6
6
4,3
6
7,8
10
5,3
150
M5
3,5
2°
26 55
14
150
M5
3,5
2°
stop gauge
X
Rahmen Türe
Dichtung
5555
Locking technology for heated applications.
Cap with hole,
plastic
Cap
plastic
Cap for adjustment screw,
plastic
6188-020258
stop gauge
6188-020506
Adapter plate, slanted, plastic
Accessories
• Fasten latch on door, according
to strike table
• Insert stop gauge until latch
engages
• Press door against frame to
mark mounting holes for the
strike
• Screw on strike and shim accord-
ing to the strike table
• Close door
• If the latch does not fully engage,
screw in the adjustment screw.
If necessary, place an additional
shim under the latch and pull the
strike part forward
Mounting instructions
black
(RAL 9005) 6186.1826
grey aluminium
(RAL 9007) 6186.1827
white aluminium
(RAL 9006) 6186.1830
black
(RAL 9005) 6188.0278
grey aluminium
(RAL 9007) 6188.0277
white aluminium
(RAL 9006) 6188.0279
black
(RAL 9005) 6186.2945
→ Standard item → On request