RAKINDA F1MAX User manual

www.scanmaxai.com
1/19
F1 Max Face Terminal Manual
Model：F1MAX（5 inch) Android 11
Version： V1.0
Shenzhen Rakinda Technologies Co.,Ltd

www.scanmaxai.com
2/19

www.scanmaxai.com
3/19
Content
One、 Product Description ......................................................................................................错误！未定义书签。
Two、 Function Feature ............................................................................................................. 错误！未定义书签。
Three、Specification Performance
....................................................................................... 错误！未定义书签。
Four、 Product List .........................................................................................................................错误！未定义书签。
Five、 Product Structure ........................................................................................................... 错误！未定义书签。
Six、 Product Wiring
.................................................................................................................错误！未定义书签。
6.1 Integrated Harness Wiring Instructions...................................................................................................................11
6.2On-site magnetic door installation reference instructions................................................................................ 12
6.2.1Magnetic door system installation diagram....................................................................................................12
6.2.2Magnetic door system wiring diagram.............................................................................................................12
Seven、Installation Instructions .............................................................................................错误！未定义书签。
7.1Wall Mount Installation Instructions ...................................................................................................................... 14
7.1.1 Installation location ............................................................................................................................................. 14
7.1.2 Dimensions and hole positions of the wall bracket.................................................................................... 16
7.1.3 Installation steps..................................................................................................................................................... 17
Eight、 Declaration of Toxic and Hazardous Substances .......................................错误！未定义书签。
Nine、 Product warranty
............................................................................................................ 错误！未定义书签。

www.scanmaxai.com
4/19
One、Product Description
（The picture is for reference only）
This Product is a convenient and safe industrial-grade visual face recognition all-in-one machine.
In response to the needs of large capacity, high performance, wide application, and customizability
in the face recognition application Maxcess, a face recognition intelligent hardware was launched.
Face dynamic recognition Maxvides users with a safe environment.
The Product is based on 200W RGB, 200W IR binocular camera, supports WIFI+10/100M
networking and rich peripheral security interfaces, meets user access control needs, and can realize
personnel authentication, personnel access management and attendance management.
The Products are widely used in office buildings, office areas, hotels, schools, shopping malls,
communities, public services, stations and scenic exhibition halls and other traffic scenarios that
need to be used, helping to achieve intelligent security control.

www.scanmaxai.com
5/19
Two、 Function Features
High Engine Binocular living Distance sensing Card Reader Security interface Various installations
Three、Specifications Performance
No.
Features
Contents
1
Performance
Combined with face recognition algorithm, it supports
10,000-level face database
2
Algorithm
Support the algorithms of top domestic AI
3
Speed
Combined with face recognition algorithm, face
recognition can be completed quickly
4
Anti-counterfeiting
Binocular face recognition, support live detection
5
Interact
Adopt live detection, 5-inch ultra-clear touch screen +
voice interactive Maxmpt
6
Environment
Super environmental adaptability, good performance
in low light and strong backlight
7
Stability
Android 11.0 system, long-term stable operation
8
Openness
Maxvide SDK to meet the secondary development
9
Epidemic Prevention
Infrared temperature measurement and screening
[optional]
10
Wireless Communication
4G network [optional]

www.scanmaxai.com
6/19
Smart Facial Access Control Terminal
Models
Standard：
F1 Max
4G：
F1 Max-4G
With Temp：
F1 Max-T
Product
Features
Main function
Access control, attendance, face recognition
Use
environment
Indoor
Device shell
Aluminum alloy material
Camera
Type
RGB
IR
Resolution
2 million pixels
2 million pixels
Vertical wide
angle
65°
65°
Horizontal wide
angle
40°
40°
White fill light
Supported
Infrared fill light
Supported
Core parameter
OS
Android 11.0
CPU
RK3566 4x ARM® Cortex™ A55 up to1.8GHz
Storage
2G+ 8G
Human-compu
ter interaction
Display
5 inches, full viewing angle, 170 ° IPS LCD screen,
resolution 480*854
Touch screen
Supported
Human body
Test accuracy: 0.1℃

www.scanmaxai.com
7/19
temperature
measurement
module
【Optional】
Test error: ≤±0.5℃
Recommended distance of 50cm
Working temperature: 15℃~40℃
Communicatio
n
Ethernet
10/100Mbps Ethernet
WIFI
Compliant with IEEE802.11b/g/n standard (2.4G)
4G【optional】
CAT1, domestic full Netcom
Identification
method
Face
Supported
IC card
Supported (Optional)
QR Code Reader
Supported (Optional)
Interface
Data port
USB 2.0*2
Replay
*1
Serial port
RS232*1
Wiegand
26bit/34bit Maxtocol
Exit switch
*1【Expandable】
Fire linkage
*1【Expandable】
Button
Reset function
Power supply
Adapter
DC12V/1.5A power supply
Environmental
requirements
Operating
temperature
-10℃～60℃
Working
humidity
20% to 90% (in the state of non-condensing water
droplets)

www.scanmaxai.com
8/19
Four、Product list
Five、Product structure
ESDElectrostatic
ESD
IEC61000-4-2,LEVEL3
Maxtection level
IP41
Installation method
Wall mounted
F1 Max
No.
Content
数量
1
Host
*1
2
Wall Mount Kit
*1
3
4G module and external antenna [optional]
*1
4
Power Adapter
*1
5
Wall Mounted Harness
*1
6
Mounting screw pack
*1
7
Product Instructions (Product Warranty Card)
*1

www.scanmaxai.com
9/19
Parts No,
Function Instructions
1
Wall Mount Bracket Fixing Screw
2
RGB Camera
3
IR Camera
4
USB2.0
5
White Fill Light (White)
6
Infrared Fill Light
7
Multi-point Capacitive Touch Screen
8
Sound Hole
9
Speaker Mesh
10
QR Code Scanning Area
11
NFC Card Area
12
Wall Mount Bracket
13
Trapezoidal Screws
14
Trapezoidal screws

www.scanmaxai.com
10 /19
Six、Product Wiring
15
Tail Wire Interface
External Interface Hardware Wiring Instructions
Type
Port
Instruction
Network Port
RJ45
Support 10/100Mbps
Relay
NC
COM
NO
Relay normally closed end/common end/normally open end. Generally, the
door lock power supply is connected to the COM terminal, and then
according to the type of door lock, the relay power supply is negatively
connected to the NO port or the NC port. Note: The maximum load of relay
contacts is 1A
Exit button
IO5
GND
Detect the key to open the door control signal, input
Call the
police
IO4
GND
Detect fire linkage control signal, input
Reset
Upgrate
GND
Support manual reset and upgrade
Serial port
RS232 TX
RS232 RX
Support serial RS232
Wiegand
WG_D1
WG_D0
Wiegand output interface, support 26bit/34bit Maxtocol
Input power
GND
12V+
Power Input: 12V DC
USB
USB_HOST-4P
External reserved USB interface to connect peripherals

www.scanmaxai.com
11 /19
6.1 Integrated Harness Wiring Instructions
USBA 2.0_OTG
Equipment upgrade, debugging, U disk

www.scanmaxai.com
12 /19
6.2 On-site magnetic door installation reference instructions
6.2.1Magnetic Door System Installation Diagram
6.2.2 Magnetic Door System Wiring Diagram
Seven、Installation Instructions

www.scanmaxai.com
13 /19
Environmental requirements
During the installation and use of this Product, all electrical regulations of the
country and region must be strictly observed. If the device does not work Maxperly,
please do not disassemble and repair it by yourself, otherwise it will affect the warranty
of the device. During installation and use, avoid harsh or extreme environments such as
extreme high temperature (or low temperature), high humidity, strong backlight,
vibration, radiation, and chemical corrosion.
light environment
It is recommended to install it in an indoor or semi-open air environment to ensure a good
light environment, avoid direct strong light or weak light affecting the recognition speed,
and avoid facing the glass door or glass wall.
Web environment
It is recommended to install it in an environment with a smooth network to
avoid the poor network affecting the recognition speed and accuracy.
Precautions
Before turning on the host device, the screen Maxtector should be torn off to
avoid affecting the camera and infrared recognition accuracy
Utilized location
The recommended installation height of the VTO is 150cm (camera height).
Recommended standing position
Comparison
The recommended distance between the person and the
machine is 0.5 meters, (the applicable height range is 1.55
meters to 1.85 meters), which can be adjusted according to
the effect of the device acquiring the face image. When the
face image is large, it can be moved backward apMaxpriately;
when the face image is small, it can be moved forward
apMaxpriately.
Recommended location

www.scanmaxai.com
14 /19
Register Comparasion
The installation location of the device must remain the same
during registration and use. If it is necessary to move the
position of the device, the installation height must be kept the
same. If they are inconsistent, the recognition effect of the
device may deteriorate. It is recommended that the distance
between the face and the machine when registering is 0.5-0.8
meters
Several methods of affecting the recognition effect
Register Comparasion
Register Comparasion
Inconsistent posture Different heights
Register Comparasion
Register Comparasion
Distance too close Distance too far
7.1Wall Mount Installation Instructions
7.1.1 Installation location
On the wall about 130cm above the ground, start drilling the holes in the first
row (using a 6mm drill bit, drilling diameter 6mm, drilling depth 4cm, second hole
translation 66mm). Move up 63mm and drill two holes for the second row.

www.scanmaxai.com
15 /19
3 groups of lines need to be embedded in advance at the host equipment (the reserved
line length is 10cm)
(1) 12V power cord RVV2x1.0 standard and above, one end is at the host device, the
other end is pulled to the original access control dedicated power supply or the 2-pin
socket of the 220V power supply on the top of the sliding door, and the factory-built
12V1.5A power supply is connected during installation The 12V end of the adapter, the
220V power cord of the adapter is directly inserted into the 2-hole socket of the 220V
power supply.
(1) The door opening control line is RVV2x0.5 standard and above, one end is at the
host device, the other end is pulled to the original access control dedicated power
supply or the sliding door top controller, and the door opening signal interface is
connected to them during installation.

www.scanmaxai.com
16 /19
(1) Super Category 5 network cable is 8x0.5 oxygen-free copper standard and above,
one end is at the host equipment, and the other end is pulled to the switch in the weak
current room to connect to the Internet during installation. In special cases, if it is
difficult to increase the wired network, the door wireless network will also Very stable,
can consider using wireless.
7.1.2 Dimensions and hole positions of the wall bracket
Fix the wall-mounted board and the host with a machine tooth cup head socket head
cap screw M3*6 (package is equipped), be careful not to short-circuit the wire head.
Remarks: If the installation environment is a glass plate or a smooth stone wall
surface that is inconvenient to open holes, it needs to be fixed with adhesive
backing, and the outgoing line will come out from the bottom;

www.scanmaxai.com
17 /19
7.1.3 Installation steps
Step 1: Fix. Fix the wall mount accessories to the wall with screws.。
Step 2: Wiring. Refer to "Wiring Instructions" to connect the wires to the device
Step 3: Adjust. Use screws to tighten the accessories and fixing screws on the fixed device.
Step 4: Lock. Fasten the device with the main unit and the wall mount with screws.
wire, adjust the wiring length until the device can be snapped into the wall mount.
Eight、Declaration of Toxic & Hazardous Substances
Part Name
Toxic and Hazardous Substances or Elements
Lead
（Pd）
HG
（Hd）
Cadmiu
m
(Cd)
Hexavalen
t
chromium
(Cr(VI))
Polybrominate
d biphenyls
(PBB)
Polybrominate
d diphenyl
ethers
(PBDE)
Shell
O
O
O
O
O
O

www.scanmaxai.com
18 /19
This table is prepared according to the Maxvisions of SJ/T11364
Nine、Product Warranty
Thank you for purchasing our company's Products. In order to ensure the interests of
Circuit
boards and
their
component
s
O
O
O
O
O
O
Power
Adapter
O
O
O
O
O
O
O
Indicates that the content of the hazardous substance in all homogeneous
materials of the part is below the limit requirement specified in GB/T26572
X
Indicates that the content of the hazardous substance in at least one
homogeneous material of the part exceeds the limit specified in GB/T26572
This labeling period refers to the period (ten years), and the harmful
substances in electrical and electronic Products will not be released under
normal conditions of use.
If there is any leakage or mutation, the use of this electronic information
Product by the user will not cause serious pollution to the environment or
cause serious pollution to his personal Maxperty.
period for causing serious damage.
This Product complies with the RoHS environmental Maxtection requirements:
At present, there is no mature technology in the world that can replace or
reduce electricity.
Lead content in glass, ceramic optical glass, steel and copper alloys.

www.scanmaxai.com
19 /19
users, any user who purchases our company's Products, if the Product has quality
Maxblems
In case of failure, you can contact the local dealer or special maintenance station with
the invoice and warranty card.
Warranty Notes:
1. Within one year from the date of purchase by the user, in the event of a failure under
normal use, the company will Maxvide free warranty parts replacement and other
services according to the failure situation;
2. The warranty card and purchase invoice are the Maxofs that the company Maxvides
after-sales service to customers.
(1) It is valid only after the dealer affixes the official seal;
3. In one of the following situations, no warranty service will be implemented, and
maintenance will be charged.
(1) Exceed the validity period of the warranty;
(2) Damage caused by imMaxper use, maintenance or storage not in accordance with
the requirements of the Product instruction manual;
(3)Failure and damage caused by disassembling, repairing or refitting the Product
without the permission of the company;
(4) Machine failure or damage caused by force majeure;
(5) wearing parts and random accessories.