Ramblewood Green EC2-30 User manual

User Guide
EC2-30
Ramblewood Green
WWW.RAMBLEWOODGREEN.COM
1

GENERAL INFORMATION
This appliance is designed for domestic household use. The User Manual
contains important product safet & installation information.
Your safet is of the utmost importance. Please ensure ou read this booklet
before attempting to install or use the appliance, and contact RambleWood
Green if ou have an question.
Safet Information
The appliance should only be installed & serviced by a ualified / licensed
technician.
The adjacent furniture and all materials used in installation must be able to
withstand a minimum of 85°C above the ambient temperature. However
certain types of vinyl or laminate kitchen furniture are particularly prone to
heat damage or discoloration at temperatures below 85°C.
Damage caused by the appliance being installed in contravention of this
temperature limit will be the liability of the user.
You should not store or place flammable li uids/materials on top of or near
this product. Items made from aluminum or plastic should also be kept
away from the appliance, as they may melt when in contact with the hot
glass surface.
Infant should be kept away from this appliance. If children is allowed in
kitchen, please keep them under close supervision at all time. Older children
should only be allowed to use this product under adult supervision.
The power cables should not be in close contact with the hot glass surface
or cookware.
Fat and oil can be ignited extremely uick when overheated. When cooking
with fat and oil the appliance should not be left unattended.
Under any circumstance the cookware should not be empty when the power
is on.
Insure all cooking zones are switched off after use.
The ceramic glass can be damaged/cracked by external shock & vibration.
2

Cast iron and aluminum cookware with sharp edge may scratch the ceramic
surface if they are dragged across it.
IMPORTANT: The German Shcott ceramic glass is tough; however it is
not unbreakable and can be damaged if heavy or sharp objects are placed on
top. DO NOT USE THE UNIT IF ITS SURFACE IS BROKEN OR
CRACKED. YOU SHOULD CONTACT RAMBLEWOOD GREEN
IMMEDIATELY.
Specifications
●Product specifications and Electrical details :
MODELS EC2-30
Voltage 110V / 240V, 60HZ
Current 13A
Max power kW 3kW
Front Side control operation YES
Electrical cable
●UL safety rated German EGO High Efficiency Burner & EGO Energy
Regulator/Controller.
●German Schott Ceramic Glass.
Control panel la out Cooking zone indicators
3
16AWG x 3C

OPERATION GUIDE
First Time Use
Any film or stickers on the glass surface should be removed before use.
You should switch on one cooking zone at a time, for 5 minutes at maximum
level. This will help to remove any odor and evaporate any humidity formed
inside the unit after exit factory.
Operation
All operations are performed by means of the 2 control knobs.
Control knob can be turned clockwise to select heating level. Numbers on
the dial indicate the power level from 1 to 9, with 9 is the maximum.
Marking below each knob indicates the zone it controls.
The 2 burners deliver maximum power of 1800W & 1200W each.
The areas where the heat radiate are marked by 2 circles on ceramic glass
surface. Saucepans must be positioned exactly on top of these zones for
efficient heating.
Cleaning and maintenance
Glass surface should be cleaned regularly.
IMPORTANT: Turn off power & let glass surface cool down before
cleaning.
Using the Scraper
The scraper should be placed against glass surface at an angle.
Residues can be removed by sliding the blade gently.
4

INSTALLATION
The installation and service must be conducted by a ualified / licensed technician,
in accordance with national & local regulation.
Product dimensions and Aperture dimensions:
Unpacking the appliance
When unpacking the appliance please check the following items are contained
within the box:
1 hob
1 Ceramic hob scraper
1 Installation and instruction manual
4 Fixing brackets
4 Fixing screws
4 Spring clips
1 Sealing strip
Positioning
The adjacent furniture must be able to withstand a minimum temperature rise of
85°C above the ambient temperature.
5
MODEL A B D E
E 2-30 290mm 510mm 270mm 490mm 53mm

o Cut a hole in counter top per drawings shown above.
o IMPORTANT: You must leave clearance of at least 25 mm between the
underneath of the unit and any surface below it.
Carefully turn the hob upside down and place it on a cushioned mat.
Apply the sealing strip provided around the edge of the appliance.
Do not leave a gap in the sealing agent or overlap the thickness.
IMPORTANT: Do not use a silicon sealant to seal the appliance against the
aperture. This will make it difficult to remove the hob from aperture in future
for service.
6

(A) Clip
(B) Fixing bracket
(C) Screw
You should insert a clip (A) into the holes which are located in each corner of
the hob.
Place the fixing brackets (B) over each hole and clip, and then place a screw (C)
through the hole and fixing bracket (B). Tighten the screws slowly.
IMPORTANT: Do not tighten the screws fully.
Carefully turn the hob back over and then gently lower it into the aperture hole
that you have cut out.
On the underneath of the hob, locate the fixing brackets (B) and turn them so
that they locate on the underneath of the worktop and the hob.
Fully tighten the screws (C) to secure the hob into position.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance must be wired into a 30 A fused spur outlet, having 3 mm
contact separation and placed in an easily accessible position adjacent to the
unit.
Cable type:
7
16AWG x 3C

Replacing the mains suppl cable
If the power cord is damaged, it must be replaced by manufacturer or ualified
technician, per national & local safety regulation/guideline.
The main terminal block is located on the underside of the hob and terminals
are accessible by removing the terminal block cover screw.
The cable connections must be in accordance with the diagram located on the
bottom of the hob.

The “green-yellow” earth wire must be connected to the Earth marked . It must
be about 10 mm longer than the live and neutral wires.
The “blue” neutral wire must be connected to the terminal marked with letter
(N) - the live wire must be connected to the terminal marked with letter (L).
Please insure cable is not kinked or trapped when the hob is in position.
DO NOT ATTEMPT TO REPAIR THE UNIT BY YOURSELF
8