Randell 9040K User manual

9000KSERIESSANDWICH/SALADPREPARATIONTABLES
High-volume pan capacity
• Open-space design allows maximum exibility
• Inter-locking adaptor bar system
· Minimizes pans from falling through during
loading and reloading
Pan openings can be modied to meet
customer requirements
• Openings can be eliminated to create counter-space
Side-mounted refrigeration system
• Superior cooling of condenser system (compressor
runs 250F cooler on average versus rear-
system designs)
• Easy access to preventive maintenance
(cleaning condenser coil)
• Truly front breathing/zero clearance (sides, back and
even curb mounted)
Superior air-ow distribution over pans
• Engineered duct system
• Low-volume linear air ow with front to
back direction
Mullion coil in base
• Superior air distribution, especially when fully
loading compartments
• Left-right circular air ow keeps air in the cabinet
Expansion valve refrigeration system
• Quicker recovery than competitive capillary tube system
Hot gas condensate evaporator system
• Eliminates necessity for oor drain
High impact ABS door jams and door/drawer liners
• Superior thermal-break (less sweating in humid conditions)
• Extra insulation value in doors (with deeper prole)
· Stepped prole provides improved seal (minimizes air-gap)
Exclusive Press-t door/drawer gaskets
• Easy install, no more screws or rubber mallets
Standard available sizes: 48”, 60”, 72” and 84”
Able to build into RanChef line-ups
Available side-mount series units:
• 9200-32-7 Series Refrigerators with standard width salad tops
· Standard available sizes: 48”, 60”, 72” and 84”
· Able to build into RanChef line-ups
• 9200-32-7 Series Refrigerators with stainless steel tops
· Standard available sizes: 48”, 60”, 72” and 84”
· Able to build into RanChef line-ups
• 9200F-32-7 Series Freezers with stainless steel tops
· Standard available sizes: 48” and 60”
· Able to build into RanChef line-ups
Available Options:
• Drawer options (contact factory for congurations)
• Tray racks for sheet pans (custom racks for dough trays)
– 24” or 27” doors only
• Casters (optional on all non-9000K series units)
• Stainless steel over-shelf assemblies
• Stainless steel nished backs
9040K Shown
888.994.7636