R&S TSMA6 User manual

R&S®TSMA6
Autonomous Mobile
Network Scanner
Getting Started
4900804002
Version 07
(a0ÞX2)

This manual describes the following R&S®TSMA6 models:
●R&S®TSMA6 (4900.8005.02)
The software contained in this product uses several valuable open source software packages. For infor-
mation, see the "Open Source Acknowledgment" document, which is available for download from the
R&S TSMA6 product page at www.rohde-schwarz.com/product/tsmx > "Downloads" >"Firmware".
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embed-
ded computing.
© 2021 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: [phone] - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
4900.8040.02 | Version 07 | R&S®TSMA6
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g.
R&S®TSMA6 is indicated as R&S TSMA6.

Contents
R&S®TSMA6
3Getting Started 4900.8040.02 ─ 07
Contents
1 Safety and Regulatory Information...................................... 5
1.1 Korea Certification Class B..................................................................5
2 Documentation Overview......................................................6
2.1 Getting Started Manual.........................................................................6
2.2 User Manuals and Help........................................................................ 6
2.3 Basic Safety Instructions..................................................................... 6
2.4 Data Sheets and Brochures................................................................. 6
2.5 Release Notes and Open Source Acknowledgment (OSA)...............7
3 Key Features.......................................................................... 8
4 Preparing for Use...................................................................9
4.1 Unpacking the Instrument..................................................................10
4.2 Connecting External Devices.............................................................11
4.3 Connecting Power Supply................................................................. 12
4.3.1 Connecting to a Vehicle DC Power Supply...........................................12
4.3.2 Connecting an AC Power Supply..........................................................13
4.3.3 Connecting the R&S TSMA6-BP Battery Pack Unit..............................14
4.4 Switching On R&S TSMA6................................................................. 17
4.5 Connecting with R&S TSMA6 WLAN Access Point.........................18
4.6 Connecting USB to LAN Adapter TSPC-U2L2 / TSPC-USL.............20
4.7 Connecting Test Mobile Phones........................................................20
4.8 Enabling Untethered Dead Reckoning .............................................21
5 Instrument Tour................................................................... 22
5.1 Front Panel View................................................................................. 22
5.2 Rear Panel View.................................................................................. 22

Contents
R&S®TSMA6
4Getting Started 4900.8040.02 ─ 07
5.3 Status LEDs.........................................................................................26
6 Configuring the R&S TSMA6.............................................. 28
6.1 Accessing the R&S TSMA6................................................................28
6.1.1 Start the R&S TSMA6 Web GUI........................................................... 28
6.1.2 Establish a Remote Desktop Connection............................................. 30
6.2 Selecting Measurement Mode........................................................... 31
6.3 Measurement Modes.......................................................................... 31
6.3.1 PC Mode............................................................................................... 32
6.3.2 Remote ViCom Server Mode................................................................ 32
6.3.3 QualiPoc Mode..................................................................................... 33
6.3.4 NESTOR and NESTOR Probe Mode....................................................36
6.3.5 ROMES Mode.......................................................................................39
6.3.6 SmartONE Mode...................................................................................40
6.4 Import of Workspace Files (NESTOR, ROMES)................................41
6.5 Bluetooth® Pairing.............................................................................. 42
6.6 Changing Keyboard Language..........................................................44
6.7 Enable Virtual Memory....................................................................... 46
7 Contacting Customer Support........................................... 50
Index..................................................................................... 51

Safety and Regulatory Information
R&S®TSMA6
5Getting Started 4900.8040.02 ─ 07
1 Safety and Regulatory Information
The product documentation helps you use the R&S TSMA6 safely and efficiently.
Follow the instructions provided here and in the printed "Basic Safety Instruc-
tions". Keep the product documentation nearby and offer it to other users.
Intended use
The R&S TSMA6 is intended for the development, production and verification of
electronic components and devices in industrial, administrative, and laboratory
environments. Use the R&S TSMA6 only for its designated purpose. Observe the
operating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or dam-
age caused by dangerous situations. Safety information is provided as follows:
●The printed "Basic Safety Instructions" provide safety information in many lan-
guages and are delivered with the R&S TSMA6.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Korea Certification Class B
이 기기는 가정용(B급) 전자파 적합기기로서 주로 가정에서 사용하는 것을 목적으
로 하며, 모든 지역에서 사용할 수 있습니다.
Korea Certification Class B

Documentation Overview
R&S®TSMA6
6Getting Started 4900.8040.02 ─ 07
2 Documentation Overview
This section provides an overview of the R&S TSMA6 user documentation.
Unless specified otherwise, you find the documents on the R&S TSMA6 product
page at:
www.rohde-schwarz.com/manual/tsmx
2.1 Getting Started Manual
Introduces the R&S TSMA6 and describes how to set up and start working with
the product. Includes basic operations, typical measurement examples, and gen-
eral information, e.g. safety instructions, etc. A printed version is delivered with
the instrument.
2.2 User Manuals and Help
Contains the description of all instrument modes and functions. Includes the con-
tents of the getting started manual .
2.3 Basic Safety Instructions
Contains safety instructions, operating conditions and further important informa-
tion. The printed document is delivered with the instrument.
2.4 Data Sheets and Brochures
The data sheet contains the technical specifications of the R&S TSMA6. It also
lists the firmware applications and their order numbers, and optional accessories.
The brochure provides an overview of the instrument and deals with the specific
characteristics.
Data Sheets and Brochures

Documentation Overview
R&S®TSMA6
7Getting Started 4900.8040.02 ─ 07
See www.rohde-schwarz.com/brochure-datasheet/tsmx
2.5 Release Notes and Open Source Acknowledg-
ment (OSA)
The release notes list new features, improvements and known issues of the cur-
rent firmware version, and describe the firmware installation.
The open-source acknowledgment document provides verbatim license texts of
the used open source software.
See www.rohde-schwarz.com/firmware/tsmx
Release Notes and Open Source Acknowledgment (OSA)

Key Features
R&S®TSMA6
8Getting Started 4900.8040.02 ─ 07
3 Key Features
As in-building traffic in cellular networks grows, there is an increased need for
indoor measurements. While traditional drive test systems consist of a laptop with
test mobile phones and scanners, there are also walk-test solutions that use tab-
lets and smartphones.
The R&S TSMA6 enhances such solutions, providing the user with accurate
insight into the RF environment.
The R&S TSMA6 combines the technology of the R&S TSME6 ultra-compact
drive test scanner with a high-performance Intel processor. The scanner can run
PC-based drive test software, and smartphones can be connected via USB.
With its ultra-broadband front end, the integrated scanner measures all supported
technologies 350 to 6000 MHz simultaneously. The future-proof architecture and
the in-field upgradability for both, hardware and software, allow up to 4x4 MIMO
measurements and pave the way for the upcoming 5G technology.
Key Features
●No limitation in 3GPP (LTE, WCDMA, GSM, NB-IoT…) frequency bands up to
6 GHz incl. a Multi-GNSS receiver for uninterrupted location tracking
●More than 10 technologies simultaneously in one system
●Future-proof for upcoming 5G related measurements
●Compact and lightweight design with customized mechanical concept for cas-
cading multiple scanner hardware
●Maximum connectivity supporting additional scanner hardware, Windows-
based PC, Android-based UEs or tablets using wireless and wired connec-
tions
●Integrated high-performance Intel i7 CPU-based PC

Preparing for Use
R&S®TSMA6
9Getting Started 4900.8040.02 ─ 07
4 Preparing for Use
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
●Do not open the instrument casing.
●Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage during operation
An unsuitable operating site or test setup can cause damage to the instru-
ment and to connected devices. Ensure the following operating conditions
before you switch on the instrument:
●The instrument is dry and shows no sign of condensation.
●The instrument is positioned as described in the following sections.
●Signal levels at the input connectors are all within the specified ranges.

Preparing for Use
R&S®TSMA6
10Getting Started 4900.8040.02 ─ 07
EMI Suppression
Electromagnetic interference (EMI) may affect the measurement results.
To suppress generated electromagnetic interference (EMI):
●Use only double shielded cables for RF and GPS connection when not
using the standard accessory.
●Use only shielded LAN cable CAT6 / assembling accessory ferrit if using
a LAN cable supplied by the customer.
●The length of the connected USB cables must not exceed 3 m.
●Always terminate open cable ends.
●DC-based lab networks are not allowed to be used for power supply.
●LAN cable length to the next PC or switch must be < 30m
●Note the EMC classification in the data sheet.
4.1 Unpacking the Instrument
The following section describes how to setup the instrument.
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measure-
ments and to avoid damage to the instrument. Observe the information on
appropriate operating conditions provided in the basic safety instructions
and the instrument's data sheet.
Check the equipment for completeness using the delivery note and the accessory
lists for the various items. Check the instrument for any damage. If there is dam-
age, immediately contact the carrier who delivered the instrument. Make sure not
to discard the box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control elements
and connectors.
Unpacking the Instrument

Preparing for Use
R&S®TSMA6
11Getting Started 4900.8040.02 ─ 07
Accessories
The following items are included with shipment of the R&S TSMA6:
●12 V DC power supply cable with a cigarette lighter connector
●Wide range RF paddle antenna (700 MHz to 2600 MHz)
●Active GPS patch antenna
●LAN cable with ferrit
●Ferrit for LAN cable supplied by the customer
Optional Accessories
The following items are optionally available.
●TSMA6-ZCB2 (Carrying Bag)
●TSMA6-Z1 (AC Adapter)
●TSMA6-Z2 (19" Rack Adapter)
●TSMA6-Z5 (Carrying Box)
4.2 Connecting External Devices
The following external devices must be connected before connecting the power
supply.
The SMA connector is sensitive to mechanical stress. Use the following
handling precautions.
●Always use a torque wrench and mount the cable end with 60 Ncm.
●Do not stack adapters directly at the SMA connector. If you need to use
adapters (e.g: SMA to N), then always use a specific adapter cable
(R&S no. 4900.1700.00).
To select the correct connectors, refer to Chapter 5.2, "Rear Panel View",
on page 22.
1. Connect the RF antenna to the RF IN connector (see Figure 5-2 - 14).
2. Connect the GPS antenna to the GPS ANT port (see Figure 5-2 - 4).
Connecting External Devices

Preparing for Use
R&S®TSMA6
12Getting Started 4900.8040.02 ─ 07
3. Connect mouse and keyboard to the USB 2.0 ports (see Figure 5-2 - 11) and
a monitor to the appropriate monitor port (HDMI, USB-C)) (see Figure 5-2 -
13, 9) if you want to use local operation. (optional)
4. Connect a LAN cable to the LAN port if you want to use the R&S TSMA6 via
Remote Desktop or as distributed system (optional). (See Figure 5-2 - 12.)
5. OPTIONAL: Connect external devices/storage devices and test mobile
phones to USB 2.0 / USB 3.0 / USB-C ports (see Figure 5-2 - 9, 10, 11).
4.3 Connecting Power Supply
This section describes how to connect the R&S TSMA6 to a power supply unit.
4.3.1 Connecting to a Vehicle DC Power Supply
For 12V Vehicle DC Supply Only
The R&S TSMA6 is to be used with a 12 V vehicle power supply only.
Use the accessory DC cable with cigarette lighter adapter to power the
R&S TSMA6 from the vehicle power supply. Connect the 7-pin connector to DC
IN.
Connecting a proprietary power supply
► To use a proprietary DC supply with the R&S TSMA6 power cable, demount
the cigarette lighter adapter from the supplied power cable and connect the
open ends of the cable to the proprietary power supply. Be sure to respect the
correct polarity (see Figure 4-1).
Connecting Power Supply

Preparing for Use
R&S®TSMA6
13Getting Started 4900.8040.02 ─ 07
Figure 4-1: Supplied power cable with cigarette lighter adapter
4.3.2 Connecting an AC Power Supply
To operate the R&S TSMA6 with an AC power supply, connect the DC IN connec-
tor with the AC power supply (R&S TSMA6-Z1, R&S No. 4901.0550.02).
Connecting Power Supply

Preparing for Use
R&S®TSMA6
14Getting Started 4900.8040.02 ─ 07
Use only the R&S TSMA6-Z1, R&S No. 4901.0550.02 as power supply.
Figure 4-2: R&S TSMA6-Z1 Power Supply
4.3.3 Connecting the R&S TSMA6-BP Battery Pack Unit
Alternatively, it is possible to power the R&S TSMA6 via the R&S TSMA6-BP Bat-
tery Pack Unit.
To use the R&S TSMA6 with the battery pack, the following steps must be per-
formed.
1. Insert the batteries into the R&S TSMA6-BP.
Figure 4-3: Battery orientation
Note: The R&S TSMA6 may be used only with closed battery cover.
2. Remove the cover cap from the docking connector of the R&S TSMA6.
Connecting Power Supply

Preparing for Use
R&S®TSMA6
15Getting Started 4900.8040.02 ─ 07
3. Attach the R&S TSMA6 with the bottom side (see Figure 4-5) on top of the
R&S TSMA6-BP (see Figure 4-4).
Figure 4-4: R&S TSMA6-BP
1 = Mechanical connectors for R&S TSMA6
2 = Power connector for R&S TSMA6
Connecting Power Supply

Preparing for Use
R&S®TSMA6
16Getting Started 4900.8040.02 ─ 07
Figure 4-5: R&S TSMA6
1* = Power connector for R&S TSMA6-BP
*On delivery the power connector is protected by a cover cap.
4. Set the R&S TSMA6 vertically on top of the R&S TSMA6-BP (1).
5. Slide the R&S TSMA6 horizontally (2) until it engages in the mechanical con-
nectors on top of the R&S TSMA6-BP. (Noticeable by a "click" sound.)
Figure 4-6: Connected R&S TSMA6 and R&S TSMA6-BP
Connecting Power Supply

Preparing for Use
R&S®TSMA6
17Getting Started 4900.8040.02 ─ 07
1 = Move R&S TSMA6 vertically
2 = Move R&S TSMA6 horizontally
3 = Power Connection established
The power-up behavior after connecting the R&S TSMA6-BP Battery Pack
Unit (including charged batteries or connected to an external DC power sup-
ply) with the R&S TSMA6 depends on the system settings on the
R&S TSMA6.
● Auto Power On
The R&S TSMA6 starts automatically when power is applied at the DC IN
connector of the R&S TSMA6 or at the DC IN connector of a connected
R&S TSMA6 Battery Pack.
● Remember Last State
The R&S TSMA6 remembers the last state before the DC power was
removed
● Startup Delay
"Auto Power On" after a configurable time delay
● Auto Power Off
"Auto Power Off" after a configurable time delay if the R&S TSMA6 is con-
nected to a R&S TSMA6 Battery Pack.
4.4 Switching On R&S TSMA6
To switch on the device, press the POWER ON/OFF button.
Switching On R&S TSMA6

Preparing for Use
R&S®TSMA6
18Getting Started 4900.8040.02 ─ 07
4.5 Connecting with R&S TSMA6 WLAN Access
Point
1. Click the Network symbol in the task bar.
2. Select the correct WLAN (in this example: TSMA6-101084).
3. Select "Connect automatically" and click "Connect".
Connecting with R&S TSMA6 WLAN Access Point

Preparing for Use
R&S®TSMA6
19Getting Started 4900.8040.02 ─ 07
4. Select "Connect using a security key instead".
5. Enter the network security key and click "Next".
Default security key: instrument
Connecting with R&S TSMA6 WLAN Access Point

Preparing for Use
R&S®TSMA6
20Getting Started 4900.8040.02 ─ 07
The connection to the WLAN access point is established.
4.6 Connecting USB to LAN Adapter TSPC-U2L2 /
TSPC-USL
Currently following LAN adapters are available.
●Dual Gbit LAN port adapter TSPC-U2L2
●Single Gbit LAN port adapter TSPC-U2L
For information how to connect an additional adapter and required driver updates,
see https://www.rohde-schwarz.com/driver/tsma6/..
4.7 Connecting Test Mobile Phones
Currently following driver is available.
Connecting Test Mobile Phones